FL DROP IN VQ35.FRESHLY REBUILT,ARP,ACL,NISMO.
#1
DROP IN VQ35.FRESHLY REBUILT,ARP,ACL,NISMO.
MOTOR IS SOLD, MODS DELETE PLEASE!!
Hey guys I'm parting out my VQ35 4th gen maxima. I would like to sell the motor first before I sell anything else. It was recently rebuilt by myself when I was attending MTI technical institute in Bradenton, Fl for Automotive Technology. Cylinder Head work and valve job was performed by Pat Nanney, he is a well known racer in circle track racing here in Bradenton, Fl. Here is a link to the build thread along with a ton of pics.
http://forums.maxima.org/all-motor/6...preciated.html
Here is details on the motor and every part.
VQ35 purchased from All Pro Used Auto Parts in Tampa, Fl.
Motor was from a 06 Maxima with 60K miles, and 5k miles on all new parts.
New Piston Ring set and pistons were cleaned of all carbon. (see build thread)
Cylinders heads ported, new 3-angle valve job. LIM and UIM slightly ported.
Cylinders rehoned, block completely cleaned up.
Full Gasket Set, all new gaskets, head gaskets, rear main seal, crank seal, new valve seals, every seal you can think of.
350z Rev-Up Oil Pump.
ARP Rod Bolts, ARP Main stud kit, ARP Head Stud Kit.
ACL Main/Rod/Thrust Bearings.
All New Timing Chains.
All New Chain Tensioners/Guides/Slacks.
New Water Pump/Thermostat.
New Spark Plugs.
350z HR(high-rev) Springs+Reatiners/Shims.
Nismo R-Tune Camshafts. StephenMax cam adapters. All clearances measured and replaced with new valve lifters/buckets.
4th Gen VQ30 Timing covers.
StephenMax Adapter Plate and PF TB.
StephenMax IACV block off plate and EGR block off plate, VIAS block off plate.
4th gen coolant tubes that connect front/rear cylinder heads.
I will also include the Short Ram Intake, and Custom Maxima Headers, and new Koyo Radiator with hoses, new belts with sale. Also included is alternator, power steering pump.
I am looking for 1,900 OBO picked up or you cover shipping. Considering I have over 4,500 in the motor alone, this is a deal. I have every receipt to prove this also. The motor is currently in my car still, if interested I can send a video to you with the car starting up and driving.
PM me or give me a call at 941-779-3938.
Thanks,
Tim
Hey guys I'm parting out my VQ35 4th gen maxima. I would like to sell the motor first before I sell anything else. It was recently rebuilt by myself when I was attending MTI technical institute in Bradenton, Fl for Automotive Technology. Cylinder Head work and valve job was performed by Pat Nanney, he is a well known racer in circle track racing here in Bradenton, Fl. Here is a link to the build thread along with a ton of pics.
http://forums.maxima.org/all-motor/6...preciated.html
Here is details on the motor and every part.
VQ35 purchased from All Pro Used Auto Parts in Tampa, Fl.
Motor was from a 06 Maxima with 60K miles, and 5k miles on all new parts.
New Piston Ring set and pistons were cleaned of all carbon. (see build thread)
Cylinders heads ported, new 3-angle valve job. LIM and UIM slightly ported.
Cylinders rehoned, block completely cleaned up.
Full Gasket Set, all new gaskets, head gaskets, rear main seal, crank seal, new valve seals, every seal you can think of.
350z Rev-Up Oil Pump.
ARP Rod Bolts, ARP Main stud kit, ARP Head Stud Kit.
ACL Main/Rod/Thrust Bearings.
All New Timing Chains.
All New Chain Tensioners/Guides/Slacks.
New Water Pump/Thermostat.
New Spark Plugs.
350z HR(high-rev) Springs+Reatiners/Shims.
Nismo R-Tune Camshafts. StephenMax cam adapters. All clearances measured and replaced with new valve lifters/buckets.
4th Gen VQ30 Timing covers.
StephenMax Adapter Plate and PF TB.
StephenMax IACV block off plate and EGR block off plate, VIAS block off plate.
4th gen coolant tubes that connect front/rear cylinder heads.
I will also include the Short Ram Intake, and Custom Maxima Headers, and new Koyo Radiator with hoses, new belts with sale. Also included is alternator, power steering pump.
I am looking for 1,900 OBO picked up or you cover shipping. Considering I have over 4,500 in the motor alone, this is a deal. I have every receipt to prove this also. The motor is currently in my car still, if interested I can send a video to you with the car starting up and driving.
PM me or give me a call at 941-779-3938.
Thanks,
Tim
Last edited by timmay5835; 06-19-2011 at 03:50 PM.
#2
My boring, stock H22A for my Accord was $1450.00
Wish I hadn't bought that and instead had the cash for this beast.
Anyway, that's a SICK deal on a great motor, GLWS...
Wish I hadn't bought that and instead had the cash for this beast.
Anyway, that's a SICK deal on a great motor, GLWS...
Last edited by tbaGd_jEw; 06-14-2011 at 06:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
maxima-junky
4th Generation Classifieds (1995-1999)
1
10-07-2015 06:13 PM