NJ Part Out - North NJ - Maxima 97 Black car 211k
The trunk and wing has not been picked up after repeated attemps by me to have the person get it.
It's available, so first come first serve $60 for the whole thing.
Exhaust is also now available, other person has not picked it up after repeated trys either and again first come first serve. (There is one picture on photobucket link. I really want local pickup for the exhaust. $180 includes all sensors and connectors. The muffler is aftermarket OEM kinda new, the quiet version. The rest is 3" catback $180 takes it all.
Thank you.
It's available, so first come first serve $60 for the whole thing.
Exhaust is also now available, other person has not picked it up after repeated trys either and again first come first serve. (There is one picture on photobucket link. I really want local pickup for the exhaust. $180 includes all sensors and connectors. The muffler is aftermarket OEM kinda new, the quiet version. The rest is 3" catback $180 takes it all.
Thank you.
Last edited by rrg; Nov 15, 2011 at 06:38 PM.
The trunk and wing has not been picked up after repeated attemps by me to have the person get it.
It's available, so first come first serve $60 for the whole thing.
Exhaust is also now available, other person has not picked it up after repeated trys either and again first come first serve. (There is one picture on photobucket link. I really want local pickup for the exhaust. $180 includes all sensors and connectors. The muffler is aftermarket OEM kinda new, the quiet version. The rest is 3" catback $180 takes it all.
Thank you.
It's available, so first come first serve $60 for the whole thing.
Exhaust is also now available, other person has not picked it up after repeated trys either and again first come first serve. (There is one picture on photobucket link. I really want local pickup for the exhaust. $180 includes all sensors and connectors. The muffler is aftermarket OEM kinda new, the quiet version. The rest is 3" catback $180 takes it all.
Thank you.
Can you email me your phone# or contact info and address for pick up?
SYCEFIRO@yahoo.com
My inbox is full
Thanks
Simon aka SYCEFIRO
Email sent to Sycefiro.
Thanks.
Local pick up North NJ Still have: PIC here
- Engine $200
- Engine mounts $30 each
- Axels (Raxels) $40 each boots are in great shape.
- Wireless remote keyless module from trunk and 2 key fobs $35
- Black OEM leather steering wheel with airbag $50
- Throttle body $25
- Passenger airbag $50
- Instrument Cluster $55
- Stock tail lights $45 each
- Small front black grill part in middle with logo $65
- Doors Black $40 each no dent/rust (local pickup only) Just a door shell
- Trunk lid with cracked wing $65
- Mirrors Driver (two bolt heads stuck inside) $25
- Fuel pump used $10
- Rear bumper no dents (little scratches) $55
- Shifter boot plastic OEM leather $20
- Heater/AC vents (tan) panel $20 with clock (black).
- ECU module (computer) 5speed SE man. $95
- Cam sensor $20
- Crank sensor $20
- Trunk gas latch cable $15
- Slightly used front discs $15
- Two Front calipers with thick brake pads still on $50
- All four door plastic sills Tan color $20
- Stock Tan plain mirror $5
- Sun roof glass $40
- Seat belts all $30
- Two visors one driver side with Home Link Tan color $35
- Glove box $20
Thanks.
Local pick up North NJ Still have: PIC here
- Engine $200
- Engine mounts $30 each
- Axels (Raxels) $40 each boots are in great shape.
- Wireless remote keyless module from trunk and 2 key fobs $35
- Black OEM leather steering wheel with airbag $50
- Throttle body $25
- Passenger airbag $50
- Instrument Cluster $55
- Stock tail lights $45 each
- Small front black grill part in middle with logo $65
- Doors Black $40 each no dent/rust (local pickup only) Just a door shell
- Trunk lid with cracked wing $65
- Mirrors Driver (two bolt heads stuck inside) $25
- Fuel pump used $10
- Rear bumper no dents (little scratches) $55
- Shifter boot plastic OEM leather $20
- Heater/AC vents (tan) panel $20 with clock (black).
- ECU module (computer) 5speed SE man. $95
- Cam sensor $20
- Crank sensor $20
- Trunk gas latch cable $15
- Slightly used front discs $15
- Two Front calipers with thick brake pads still on $50
- All four door plastic sills Tan color $20
- Stock Tan plain mirror $5
- Sun roof glass $40
- Seat belts all $30
- Two visors one driver side with Home Link Tan color $35
- Glove box $20
Last edited by rrg; Dec 31, 2011 at 08:36 AM.
Def need pics of the exhaust..will by for 180$ send pics to lsvtec85@gmail.com
Bump:
I got the new photos up.
Exhaust pics are up.
Can anyone confirm that the keyless assembly module located in trunk, (removed part see pics) and two key fobs will swap out with no problem for anyone who wants to buy two new fobs including module ($35) for a diffrent 97 car?
I don't have access to another Maxima to try it.
Thx.
I got the new photos up.
Exhaust pics are up.
Can anyone confirm that the keyless assembly module located in trunk, (removed part see pics) and two key fobs will swap out with no problem for anyone who wants to buy two new fobs including module ($35) for a diffrent 97 car?
I don't have access to another Maxima to try it.
Thx.
Last edited by rrg; Nov 21, 2011 at 05:38 PM.
1.) The engine $190 but it needs ign. coils and injectors everything else as-is.
I can have it yanked out for pick up if you are serious.
2.) The trunk lid $60 is no problem, the wing has some snaps and a few screws. I can work on removing it if you really want it.
3.) Front grill emblem $20.
4.) shift boot and 2 -key fobs with key assy module still have them Both $50.
I can have it yanked out for pick up if you are serious.
2.) The trunk lid $60 is no problem, the wing has some snaps and a few screws. I can work on removing it if you really want it.
3.) Front grill emblem $20.
4.) shift boot and 2 -key fobs with key assy module still have them Both $50.
Last edited by rrg; Dec 3, 2011 at 11:21 AM.
It has rust on the lower front leading edge about 2-3inches.
If you still want it, take it for $10. It will need a little work to attach it to the inner fender.
Let me know.
Thank you.
If you still want it, take it for $10. It will need a little work to attach it to the inner fender.
Let me know.
Thank you.
Some one want's it for this week and said they would come.
If he does not come and get it, I will let you know.
It's a catback performance Y-pipe 3" direct fit. I bought it from cattman.com. It's the same one they still have on their site for 97.
Thanks.
If he does not come and get it, I will let you know.
It's a catback performance Y-pipe 3" direct fit. I bought it from cattman.com. It's the same one they still have on their site for 97.
Thanks.
sure that's a 3 inch y? i believe that y-pipe is 2.5...
I'm pretty sure it's 3" because the muffler is smaller but I am going into the garage Friday so I will check it to be sure.
The motor needs injector and coils the rest as is $180 and I will yank it out and have it ready if you are serious.
Let me know via PM.
The motor needs injector and coils the rest as is $180 and I will yank it out and have it ready if you are serious.
Let me know via PM.
Last edited by rrg; Dec 7, 2011 at 12:09 PM.
Let me know please, im highly interested!
The guy from here changed his mind on the exhaust muffler system today, it's gone.(SOLD)
One look at it and he decided to take it and got a good deal on it with a bunch of stuff.
Thanks.
One look at it and he decided to take it and got a good deal on it with a bunch of stuff.
Thanks.
Last edited by rrg; Dec 9, 2011 at 05:00 PM.
The front door is in very good shape. No dents no rust, no scrapes, just road grime. It's missing the rear mirror and window motor. It's just the door shell with the glass $35 it's yours.
Here's the slide show of the car with pics of the door paint. The doors are dirty in the pics but no rust or dents for that price.
Thanks.
Sway bar endlinks. Not sure what piece that is but we haven't removed suspension parts yet.
I have them but with that many miles they might not be worth it.
If you want to make me an offer and yank them out let me know, I'll work with you. PM me.
EDIT:
Now I think I know what the endlinks are. Those little 5" with bushing at the end of the sway bar.
I have one that was replaced about 1 1/2 yrs. ago but the other one looks bad and rusty.
I would just buy new ones. If am wrong let me know.
Thanks.
Here's the slide show of the car with pics of the door paint. The doors are dirty in the pics but no rust or dents for that price.
Thanks.
Sway bar endlinks. Not sure what piece that is but we haven't removed suspension parts yet.
I have them but with that many miles they might not be worth it.
If you want to make me an offer and yank them out let me know, I'll work with you. PM me.
EDIT:
Now I think I know what the endlinks are. Those little 5" with bushing at the end of the sway bar.
I have one that was replaced about 1 1/2 yrs. ago but the other one looks bad and rusty.
I would just buy new ones. If am wrong let me know.
Thanks.
Last edited by rrg; Dec 9, 2011 at 07:10 PM.
just bought the exhaust, y pipe back and floor mats. Roy is a great guy and willing to work with you and hes honest to boot. he knows his stuff and even helped me load up the car. Definently get what u need from him!
thanks again
thanks again
The engine is not out, $190. At that price the mechanic doing the removal is being paid for his labor.
I am happy to work on getting you a good idea of what you need to get it going.
You're a little late for a complete working engine.
Engine block, intake manifold, starter and alternator still there.
Everything else is going to be needed.
I don't want you to waste your time if you need more than the basic engine block.
It's still being parted out, slowly.
pm sent.
EDIT as of Wed. 12/14.
1.) I sent the pictures of the engine.
2.) The steering lock and 2 key set with doors and trunk locks ready for shipping.
Please PM me to confirm. shipped (SOLD)
thanks.
I am happy to work on getting you a good idea of what you need to get it going.
You're a little late for a complete working engine.
Engine block, intake manifold, starter and alternator still there.
Everything else is going to be needed.
I don't want you to waste your time if you need more than the basic engine block.
It's still being parted out, slowly.
pm sent.
EDIT as of Wed. 12/14.
1.) I sent the pictures of the engine.
2.) The steering lock and 2 key set with doors and trunk locks ready for shipping.
Please PM me to confirm. shipped (SOLD)
thanks.
Last edited by rrg; Dec 16, 2011 at 07:58 AM.
Bump.
Greenspeed,
The motor is out of the car and on the hoist ready for pickup.
$180 is a good deal for the work it took.
PM to confirm time and date.
thx.
UPDATE: The motor is on hold for a week.
Greenspeed,
The motor is out of the car and on the hoist ready for pickup.
$180 is a good deal for the work it took.
PM to confirm time and date.
thx.
UPDATE: The motor is on hold for a week.
Last edited by rrg; Dec 16, 2011 at 08:55 AM.



