4th Generation Classifieds (1995-1999) The highly sought after variable intake may be a click away.

AL Black '97 GXE Partout. Aftermarket parts. coilovers. exhaust. lip kit. intake. etc.

Thread Tools
 
Search this Thread
 
Old Nov 5, 2011 | 12:29 PM
  #1  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
Black '97 GXE Partout. Aftermarket parts. coilovers. exhaust. lip kit. intake. etc.

A few days ago I got in a wreck and totaled my car. Sucks, but my loss is your gain. Anything that can be reasonably shipped and that I can make a profit on is up for grabs. All interior trim is beige. Hood and front bumper are trashed. As far as i can tell, almost all components under the hood are fine besides the radiator. All prices include shipping unless otherwise noted and are OBO. Pictures of parts available soon. Any prices or availability on other parts, just ask. I'm located about 45 minutes southeast of Mobile, so anyone here in the south feel free to come take a look or save yourself some money and pick whatever you want up. I'm not in some dire need for money, so please don't offer me a hundred dollars for the coilovers or something like that. I'm a reasonable person, i'm sure we can work something out. Text me at 251-269-4699, state what parts you're interested in and I'll send you pictures.

Most notable parts are-


Mimo Cold Air Intake (the long tube kind), with newish filter, ($40)


Warpspeed Exhaust System, you won't find this for sale anymore, it was very limited, ($260)

Unorthdox Underdrive Pulley ($40) (only part I can't get off the freaking car)


Nismo Floor Mats ($30)

Stillen Front Lip (for 97-99), received a crack in the accident, but completely repairable, and would still even mount without repair. ($100)


1 Ionic Dynamic Sideskirt (right side, the left one was damaged in the accident).I realize most people don't need just one sideskirt, but it's basically impossible to order just one new, so if you need to replace one, this is a good opportunity. ($90)

18" Sportmaxx (XXR) Gun Metal Grey 962's (7.5" in the front 8.5" in the rear) with Nexen N3000 Tires. (225's in front, 245's in rear). I know it's dumb to have staggered rims on a front wheel drive car, but I couldn't pass up the deal I got on these, so it is what it is. Doesnt effect anything, and they look great on the car. Centercaps are missing, but they were horribly ugly anyway. A little curb rash on the front two, but just on the outside lip part. Front tires are pretty much done and need to be replaced soon. Rear tires still have a good bit of tread left. ($500).

Last edited by R33GXE; Dec 20, 2011 at 10:24 AM.
Old Nov 5, 2011 | 03:02 PM
  #2  
beatdown97's Avatar
Senior Member
iTrader: (2)
 
Joined: Aug 2010
Posts: 389
From: Vero beach Florida
what condition are the headlights and corner lights?
Old Nov 5, 2011 | 03:30 PM
  #3  
IslandMax's Avatar
Senior Member
iTrader: (24)
 
Joined: Apr 2008
Posts: 608
From: NYC
Pictures of the coilovers and pulley please.
Old Nov 5, 2011 | 03:34 PM
  #4  
gregoshe's Avatar
Newbie - Just Registered
 
Joined: Feb 2011
Posts: 1
k sports

HEy if you still have the coil overs Im interested. I live in new jersey
Old Nov 5, 2011 | 03:35 PM
  #5  
98nismomax's Avatar
Senior Member
iTrader: (5)
 
Joined: Jul 2009
Posts: 632
From: minnesota
pictures of the wapspeed cat back and stillen front lip.
Old Nov 5, 2011 | 03:39 PM
  #6  
GGENIUS's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2010
Posts: 2,121
From: trenton, nj
i need the coilovers and that magnaflow cat. sent you a message.
Old Nov 5, 2011 | 04:44 PM
  #7  
zach-eminem's Avatar
Junior Member
iTrader: (1)
 
Joined: Oct 2009
Posts: 75
From: southeast,ga
interested in the shift **** and sts and underdrive pulley lmk pics and price shipped
Old Nov 5, 2011 | 04:49 PM
  #8  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
If you want pics, make ie easy on me and just PM me your number. I'll text them to you. I'm doing all this on my phone as I currently don't have my laptop.

Also, no longer have shift ****, sorry. But i'll sell the short throw for $25.
Old Nov 5, 2011 | 04:53 PM
  #9  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
Oh, and the drivers side corner and headlight are trashed. The passenger side corner is still good, but the headlight has a small hole/crack in it from the accident. I believe it still works.
Old Nov 5, 2011 | 06:25 PM
  #10  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
And if i'm not able to immediately get back to you or send you pictures, please be patient. I still have to take a lot of these parts off of my car to take pictures, and I work as a firefighter so i'm away from home for 24 hours at a time.
Old Nov 5, 2011 | 09:19 PM
  #11  
maxima_kid's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Apr 2004
Posts: 889
Hey, very interested in a package deal for the y pipe, and the front and rear stillen kit. Needed asap. LMK, shipped to Ca 94134
Old Nov 5, 2011 | 09:41 PM
  #12  
beatdown97's Avatar
Senior Member
iTrader: (2)
 
Joined: Aug 2010
Posts: 389
From: Vero beach Florida
also do you have the bose hu? if so how much shipped to 72401. i keep asking ppl
Old Nov 5, 2011 | 10:35 PM
  #13  
schmellyfart's Avatar
Senior Member
iTrader: (46)
 
Joined: Jan 2009
Posts: 3,816
From: AZ
Where did you buy the short throw shifter?
Old Nov 5, 2011 | 11:28 PM
  #14  
Snypa's Avatar
Senior Member
iTrader: (35)
 
Joined: May 2007
Posts: 7,389
From: I-75 4th_Laud
Some nice stuff here.
Old Nov 6, 2011 | 04:38 PM
  #15  
hornepirate's Avatar
Senior Member
iTrader: (23)
 
Joined: Mar 2008
Posts: 2,014
From: Florida
Pm sent
Old Nov 7, 2011 | 11:16 AM
  #16  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
Coilovers and Hi-Flow cat sold.

Please continue to have patience as I deal with these dozens of PM's. You will get your pictures soon. I'm currently at work and will try to text most of you tonight.

Bose head unit is not available, sorry.
Old Nov 7, 2011 | 11:19 AM
  #17  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
I got my STS off eBay. If you want mine, first person to paypal me $25.00 gets it. Shortens the throws by at least 40%. Perfect condition.

Emontana07@gmail.com
Old Nov 7, 2011 | 01:57 PM
  #18  
schmellyfart's Avatar
Senior Member
iTrader: (46)
 
Joined: Jan 2009
Posts: 3,816
From: AZ
Does the shifter come with all necessary hardware? I'm Paypal ready.
Old Nov 7, 2011 | 07:28 PM
  #19  
Popchuck4thgen's Avatar
Newbie - Just Registered
 
Joined: Apr 2011
Posts: 4
From: Wisconsin
any way you could sell me the relay for the heater fan?
Old Nov 7, 2011 | 10:45 PM
  #20  
Snypa's Avatar
Senior Member
iTrader: (35)
 
Joined: May 2007
Posts: 7,389
From: I-75 4th_Laud
What else does the STS come with? Please LMK
Old Nov 8, 2011 | 03:05 AM
  #21  
wirelessdude04's Avatar
Senior Member
iTrader: (24)
 
Joined: Dec 2006
Posts: 4,870
From: Philadelphia, PA
I'll take pulley if it's a UDP... Glws by the way
Old Nov 8, 2011 | 07:33 AM
  #22  
95nismax's Avatar
Junior Member
iTrader: (1)
 
Joined: Jun 2010
Posts: 52
From: MA
PM sent~
Pete
Old Nov 9, 2011 | 08:43 AM
  #23  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
Pulley is legit, not eBay crap. I'm having a lot of trouble getting it off my car. Any suggestions? Ha. Still working on getting pictures of everything. Work comes first at the moment. Should have time to get stuff done Sunday. If you PM'd me, I've read it and haven't forgotten about you.

STS is sold.
Old Nov 10, 2011 | 07:17 AM
  #24  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
Getting a surprise day off Friday. All those waiting for me to text you pictures will receive them then. If you want a part, you can paypal me the money for it to reserve it as a few have already done. This will guarantee you are the one who receives that part. Just add 3% for paypal fees.
Old Nov 12, 2011 | 09:18 PM
  #25  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
Many parts still for sale. All parts listed have been taken off car. Pics will be up tomorrow.
Old Nov 12, 2011 | 09:30 PM
  #26  
furbiss112's Avatar
Senior Member
iTrader: (9)
 
Joined: Dec 2000
Posts: 891
From: Vernon Hills, IL/ Alexandria, VA
You have pm.

Ferhan
Old Nov 13, 2011 | 07:33 AM
  #27  
darrick's Avatar
Dallas Nissan Enthusiast
 
Joined: Apr 2002
Posts: 1,452
From: DWF
in for pic"s
Old Nov 14, 2011 | 03:05 AM
  #28  
MAXIMA_STYLE's Avatar
Senior Member
iTrader: (21)
 
Joined: Oct 2007
Posts: 4,121
From: NE Ct
How much for center vents shipped to 06255...if they are black..snd what are the chnces if getting that 5 speed shifterbezel??
Old Nov 14, 2011 | 04:41 AM
  #29  
wirelessdude04's Avatar
Senior Member
iTrader: (24)
 
Joined: Dec 2006
Posts: 4,870
From: Philadelphia, PA
For the pulley use a breaker bar on it and have it against the ground and crank the motor should break loose
Old Nov 14, 2011 | 06:44 PM
  #30  
maxima_kid's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Apr 2004
Posts: 889
Originally Posted by maxima_kid
Hey, very interested in a package deal for the y pipe, and the front and rear stillen kit. Needed asap. LMK, shipped to Ca 94134
So is there a packaged deal for multiple over sized items or no? ...
Old Nov 15, 2011 | 07:55 PM
  #31  
Nismo95Max's Avatar
Member
iTrader: (6)
 
Joined: May 2010
Posts: 230
From: Pottstown PA
in for pics. also it would be easier for everyone if you edited the actual post saying if anything was sold, im having trouble determining if its worth asking for what i want bc i have to read every post to see if something is sold.

interested in CAI, y pipe, and UDP.. also i have a set of wheels.. thinkin about trades??
Old Nov 15, 2011 | 07:56 PM
  #32  
Nismo95Max's Avatar
Member
iTrader: (6)
 
Joined: May 2010
Posts: 230
From: Pottstown PA
Originally Posted by wirelessdude04
For the pulley use a breaker bar on it and have it against the ground and crank the motor should break loose
^ VJ knows whats up! Got his foot in everything
Old Nov 18, 2011 | 08:39 AM
  #33  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
Tried nearly everything. That pulley will not come off. Breaker bar was one of the first thing I tried.

Sold items edited out of original post.

Text me at 251-269-4699 stating which parts you want and I'll send you a picture.
Old Nov 18, 2011 | 08:57 AM
  #34  
AllMaxxedOut's Avatar
Senior Member
iTrader: (15)
 
Joined: Oct 2004
Posts: 2,122
From: NY (somewhere between Queens & BK)
Pics of rims?
Old Nov 18, 2011 | 03:11 PM
  #35  
Ricardo8619's Avatar
Newbie - Just Registered
 
Joined: Nov 2011
Posts: 9
From: Gainesville GA
i need some advice on slammin my Max on his *****... will someone plzzzz PM me? good luck with sale man.
Old Nov 18, 2011 | 03:46 PM
  #36  
GGENIUS's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2010
Posts: 2,121
From: trenton, nj
Originally Posted by Ricardo8619
i need some advice on slammin my Max on his *****... will someone plzzzz PM me? good luck with sale man.
questions are to be asked in your generations section. theres a sticky thread for noobs to ask questions.
Old Nov 18, 2011 | 05:36 PM
  #37  
furbiss112's Avatar
Senior Member
iTrader: (9)
 
Joined: Dec 2000
Posts: 891
From: Vernon Hills, IL/ Alexandria, VA
I get the pulley for cheap if you get it off using my method.

Put a breaker bar on it and make sure it reaches the ground towards the radiator. Make sure it is on good. GO into car and give it a quick crank with out starting it. It should break free and you can now remove it.

Ferhan
Old Nov 18, 2011 | 08:18 PM
  #38  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
My car is totaled from a head on collison. There's no "cranking" it.
Old Nov 18, 2011 | 08:27 PM
  #39  
78Formula's Avatar
Junior Member
 
Joined: Oct 2010
Posts: 21
From: Georgia
Interested in the Mimo Cold Air Intake and Nismo floomats. And judging by the post, I'm guessing the head lights are toast?
Old Nov 18, 2011 | 09:34 PM
  #40  
R33GXE's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
From: Gulf Shores AL.
One of the headlights is toast. The other has a small hole. If you're interested in a part, I've said multiple times how to contact me...



All times are GMT -7. The time now is 08:36 PM.