The long haul of the family maxima has finally come to an end! Over 10 years in the family name, we just don't want to let it go. Had my third tranny blow, and I just cannot afford it this time around. Purchased myself a brand new car, and now it's time to part out my baby!

04 Murano VQ35de $850

Purchased a few years back with 53k, installed last June and put roughly 12k on it. The car was daily driven, ran great. But as stated, due to multiple tranny issues I couldn't take it any longer. Never tuned or dynoed, but I have multiple videos and pictures of the motor running/installed. Motor was just pulled last week. Still have receipts for most, but due to a change in households, I misplaced many.

Including mods/new parts:

NWP Block off plate
VQ30dek 290cc injectors and fuel rail
Stephanmax cam adapters
Converted cable driven 3.5 throttle body
New 3.0 OEM secondary and primary chain tensioners
New 3.0 timing chains
New 3.0 chain guides
3.0 timing chain covers and sprockets
New 3.0 water pump, thermostat
Complete reseal, including head gaskets, rear main seal, intake mani gaskets
04 Altima intake manifold without EGR
New OEM idler pulley tensioner
Currently setup with no A/C or PS

Gutted Manual Steering Rack $150

Similar to the same setup on the worlds fastest maxima.
Brand new OEM bellows, tie rods and endlinks. Gutted piston, nice weight reduction when PS pump is removed. Fully functional and adjustable, preload can be set for tight or loose driving styles.

Freshly Rebuilt 5sp Fidanza Flywheel $200 shipped
Friction plate, and all necessary hardware replaced less than 10k miles


Ionic Dynamics, Side Skirts, and rear valences
Still have to get a quote on shipping at buyers expense. Front lip is broken and gone. Can piece parts, but would rather sell it all together. Few cracks chips on the skirts but can be revived with a little sandpaper.


Black Nismo Shift **** $50 shipped

350z black cloth seats (mounted on maxima power seat rails) $200
Passenger side in great condition, driver side has minor wear on bolster nearest to door. Small tear

5th gen maxima black rear leather bench $130
Perfect condition, super soft. Perfect for seat roll down mod.


Complete Running VQ30de $250
Removed when 3.5 was installed. Had a small oil leak from upper oil pan. Removed at 133k. Has new water pump, tensioners, intake mani gaskets and valve cover gaskets.


THIS CAR IS BEING PARTED OUT COMPLETELY! PLEASE FEEL FREE TO ASK FOR ANY PART, NAME A PRICE & NEGOTIATE.

3.5 timing covers and components

black door panels, window switches
5sp starter, shift linkage, 2 blown a/c compressors

I can include more pictures and videos via text, 727-247-8733.


I am located in the Tampa Bay Area. I refuse to ship extremely big items, but will look into shipping for reasonable parts at buyers expense.

Thanks for all interest! -Kevin

 

 

fenders??? hood?

 

dibs on the headers!

 

pics of the headlights and corners?

 

How exactly is the steering rack adjustable? And how was low speed parking with the gutted rack?

How much do you want for the aftermarket timing chains, sprockets, and tensioners?

 

does the front right steering knuckle have a good wheel bearing?

 

What kind of wheels are those in the 2nd photo?

 

Hood is in great shape, fenders have minor dents. But prefer not to ship those parts.

 

It has factory adjustment, then is a spring for preload on the inside of the piston, you can either tighten or loosen it for your preference. Slow speeds, with a lowered car, wide wheels and tires, not easy but do-able.

I can do 80 shipped for the timing components.

 

I don't believe the wheel bearings are good. Being lowered tore them all up.

 

2013 gt500 replica wheels

 

damn, alright, junk yard it is. what do you plan on doing with the shell after partout? pm me

 

Do you know where I can get those wheels?

 

I'm interested in several things for my 3.0. New water pump, belt tensioner, 3.5 cable throttle body, dek injectors and rail. Can you get me a quote for these shipped to 59102? I may not take all of these things depending on prices. Thanks!

 

Americanmuscle.com

 

Are they a direct fit, did you need any spacers on the front or the rear? Thanks.

 

How much for this?
or is this what was priced at 80 in post 10?

New 3.0 OEM secondary and primary chain tensioners
New 3.0 timing chains
New 3.0 chain guides
3.0 timing chain covers and sprockets

 

What brand are the timing components?

 

I only have new aftermarket timing chains, sprockets and tensioners no guides. Not oem

 

Off the top of my head, I have no clue. Bought them offline a few years back, and got a decent deal on oem, so I went that route.

 

Bump
3.5 swap reduced!
Need this stuff gone, throw me offers!

 

Where in florida you located?

 

The car is in New Port Richey, I live in Land O Lakes. Relatively close to the Tampa Bay Area.

 

Damn I was hoping you were closer. There few things im looking at.

 

test pipe

 

Where are you located? Don't mind meeting as long as it's not too far. Lol

 

LMAO
im in Ft Lauderdale

 

were u using an adjustable for with the 3.5 setup? if so what kind and how much?

 

Headers shipped to 10456

 

Do you have the alternator available?

 

Damn, that's not too bad!

 

No adjustable fpr, stock de-k full rail, and fpr

 

All components are mounted to the 3.5, don't really wanna piece it!

 

What do you want for the Front Driver's Side Window Regulator shipped to 77084?
Thanks!

 

How far from orlando, I'm interested on the motor, which spec clutch do you have also. Thanks

 

what year ECU were u running and was it 5spd? looking for 95/96 5spd ECU. if so how much?

 

Hour and a half or so from Orlando. Spec clutch is sold.

 

Stock 97 se 5spd ecu

 

BUMP

Updated original post. All pm's replied. Still plenty available, send me offers!