NJ Garage clean out
#1
Garage clean out
I will update this post with parts I have around in the garage. You can text me at 201-719-0479
To start off.
*front passenger door qn0
*passenger side qn0 heated mirror $40
*have 2 front passenger glass $20 each
*passenger rear glass $20
*2.5" 240sx test pipe $25 (used for 2 weeks)
*OEM exhaust manifold gaskets
*Stone Mountain Racing y-pipe w/wideband bung [ebay] (needs new flex) $50
*Vibrant 2.5" ID x 10" flex w/ Braided Liner $30
*Vibrant 2.25" gasket $5 (good for obx front header flange)
*5thgen rear valve cover $10
*timing covers, oil pan, coolant logs $60
*oem water pump (6k) with new gaskets $50
*timing components oem 6k on main chain, guides, tensioners. All sprockets, bolts, cam chains, bridges included $200 (missing intake cam bolts)
*crank pulley 73k $50
*partial 00vi setup (uim, lim, fuel rail) $30
*AT flywheel $10
*97-99 fog light brackets $20
*ABS stock design spoiler QN0 3yr old paint & extra brake light (SOLD)
*oem antenna $50
*mud flaps $50
*oem front plate mount $10
Dropbox Maxima Parts Pictures
****Note****
I have pretty much new oem main timing chain & tensioners and water pump (will come with new oem gasket) with about 7k miles on it. Timing covers, upper and lower oil pans.
To start off.
*front passenger door qn0
*passenger side qn0 heated mirror $40
*have 2 front passenger glass $20 each
*passenger rear glass $20
*2.5" 240sx test pipe $25 (used for 2 weeks)
*OEM exhaust manifold gaskets
*Stone Mountain Racing y-pipe w/wideband bung [ebay] (needs new flex) $50
*Vibrant 2.5" ID x 10" flex w/ Braided Liner $30
*Vibrant 2.25" gasket $5 (good for obx front header flange)
*5thgen rear valve cover $10
*timing covers, oil pan, coolant logs $60
*oem water pump (6k) with new gaskets $50
*timing components oem 6k on main chain, guides, tensioners. All sprockets, bolts, cam chains, bridges included $200 (missing intake cam bolts)
*crank pulley 73k $50
*partial 00vi setup (uim, lim, fuel rail) $30
*AT flywheel $10
*97-99 fog light brackets $20
*ABS stock design spoiler QN0 3yr old paint & extra brake light (SOLD)
*oem antenna $50
*mud flaps $50
*oem front plate mount $10
Dropbox Maxima Parts Pictures
****Note****
I have pretty much new oem main timing chain & tensioners and water pump (will come with new oem gasket) with about 7k miles on it. Timing covers, upper and lower oil pans.
Last edited by Joey SR; 02-20-2016 at 09:59 AM.
#12
I'm looking for clear front corner lights, timing chain tensioner, and exhaust from the flex pipe forward. I'm in 21157, so I calculated approximately $30 for USPS shipping, not including materials. Can the factory manifold be used with the y pipe you have? I'm assuming so. How would you recommend joining the stock cat, a new flex pipe, and your y pipe? Feel free to send pm reply.
#13
I'm looking for clear front corner lights, timing chain tensioner, and exhaust from the flex pipe forward. I'm in 21157, so I calculated approximately $30 for USPS shipping, not including materials. Can the factory manifold be used with the y pipe you have? I'm assuming so. How would you recommend joining the stock cat, a new flex pipe, and your y pipe? Feel free to send pm reply.
Thread
Thread Starter
Forum
Replies
Last Post
Huttig2009
5th Generation Classifieds (2000-2003)
8
09-25-2015 03:31 PM
lux97Max
1st-3rd Generations Classifieds (1981-1994)
1
09-14-2015 03:54 PM
KGMtech
7th Generation Maxima (2009-2015)
3
08-18-2015 09:21 AM
soon2ownmax
6th Generation Maxima (2004-2008)
0
08-13-2015 02:19 PM