I AM INSTALLING DRIVING LIGHTS(YOU KNOW THOSE LITTLE BLUE THINGS THAT GO UNDER THE LICENCE PLATE) ON A 1996 MAXIMA, IT SEEMS LIKE A STANDARD KIT, IT INCLUDES A SWITCH FOR THEM AND A LOT OF WIRES, BUT I DON'T HAVE THE FIRST CLUE AS TO HOW TO WIRE IT. I JUST INSTALLED MY FIRST HEAD UNIT TODAY AND I FEEL PRETTY GOOD ABOUT MYSELF WITH THAT ACCOMPLISHMENT, BUT I FELT LIKE IT WAS TIME TO ADD ANOTHER TOY. IF ANYONE COULD DIRECT ME TO A GOOD DIY SITE TO FIGURE THESE THINGS OUT IT WOULD BE MORE THAN APPRECIATED. THANKS FOR YOUR HELP IN ADVANCE.
-DANNY

 

Well, you really need to let us know more info here. But, I can help you out.

Can you email me or post the wiring diagram for the kit. I just need to know if they are doing the wiring in parallel or series. And, I also need to know what type of switch they are using.

 

The only problem that I have now is how do I feed the wires from the engine bay into the interior of the car. I tried going through this little hole I found above the driver side tire but I couldn't seem to get it through. The electrics seemed simple enough, loop them all together tie it in to the negative battery end and then ground all the lights. I was about to get out the drill, but i don't think that would be good for resale, hehe. But i know there has to be a way to do it. So let me know if you can help.
Thanks,
-Danny