4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Honestly - Black Chrome Altezzas?

Thread Tools
 
Search this Thread
 
Old Mar 29, 2003 | 07:28 PM
  #1  
VanHowie's Avatar
Thread Starter
Member
 
Joined: Feb 2003
Posts: 223
From: San Diego
Honestly - Black Chrome Altezzas?

All right I need to decide whether I'm going to get black chrome altezzas for my black '96 Maxima SE or just let the taillights be. What I need from you is your honest opinions. Will black chrome look good on a black max?
Old Mar 29, 2003 | 08:02 PM
  #2  
erty67's Avatar
Decal Specialist
iTrader: (104)
 
Joined: Jun 2001
Posts: 6,755
tell ya what....look at my car and you decide I have black chrome altezzas.

...there are other pics on my homepage

Old Mar 29, 2003 | 08:07 PM
  #3  
metallic97gxe's Avatar
Master Will
iTrader: (3)
 
Joined: Sep 2000
Posts: 5,270
From: Metter,Ga
yes they will look good!

go ahead and get them!!!!!!!!!!!
Old Mar 29, 2003 | 08:27 PM
  #4  
Odie96's Avatar
Senior Member
 
Joined: Feb 2003
Posts: 240
I feel the same way that you do!!! I hate it when I see a black/dark car with clear tail lights...It just doesn't look right. I haven't seen the black chrome up close though - they might actually look good
Old Mar 29, 2003 | 08:42 PM
  #5  
happyricefob's Avatar
V^___^V
iTrader: (7)
 
Joined: Aug 2002
Posts: 6,400
From: Fremont, CA
here is mine 95 black with altezza:





although i hate being identified as ricers (in most people's view), but i do think altezza is better than stock 95-96 tails... cuz i hate the orange part VERY MUCH.

altezza looks cool @nite, tat's jus my personal opinion =)

btw i got them for $41 on ebay...hehe
Old Mar 29, 2003 | 08:47 PM
  #6  
Odie96's Avatar
Senior Member
 
Joined: Feb 2003
Posts: 240
Could you possibly put a white bulb in the outside lights? There is a clear/white light next to the big red one, right? I'm asking because I'm thinking of shaving the inside lights and I'd need to put a reverse light somewhere.
Old Mar 29, 2003 | 08:55 PM
  #7  
VanHowie's Avatar
Thread Starter
Member
 
Joined: Feb 2003
Posts: 223
From: San Diego
Originally posted by erty67
tell ya what....look at my car and you decide I have black chrome altezzas.

...there are other pics on my homepage

Hey erty67, those are black altezzas in that pic? Cause they look like they're silver. Or maybe it's just a bright picture from the sunlight?
Old Mar 29, 2003 | 09:02 PM
  #8  
VanHowie's Avatar
Thread Starter
Member
 
Joined: Feb 2003
Posts: 223
From: San Diego
Oh yeah, and what does "ricey" mean? Weird-looking or something?
Old Mar 29, 2003 | 09:12 PM
  #9  
VanHowie's Avatar
Thread Starter
Member
 
Joined: Feb 2003
Posts: 223
From: San Diego
Yo happyricefob, are your altezzas the carbon ones?
Old Mar 29, 2003 | 09:55 PM
  #10  
Max-2-GTR's Avatar
Senior Member
 
Joined: Sep 2002
Posts: 500
Go for the black/chrome, I have a dark green max and they look really good on.
Old Mar 29, 2003 | 10:35 PM
  #11  
ch13f's Avatar
Senior Member
 
Joined: Aug 2002
Posts: 1,752
Originally posted by Odie96
Could you possibly put a white bulb in the outside lights? There is a clear/white light next to the big red one, right? I'm asking because I'm thinking of shaving the inside lights and I'd need to put a reverse light somewhere.
I wouldn't suggest doing that, i've seen it done and basically.. it doesn't look good.
Old Mar 30, 2003 | 01:09 AM
  #12  
happyricefob's Avatar
V^___^V
iTrader: (7)
 
Joined: Aug 2002
Posts: 6,400
From: Fremont, CA
Originally posted by MaxRookie
Yo happyricefob, are your altezzas the carbon ones?
yeap...black carbon fiber =)
Old Mar 30, 2003 | 09:03 AM
  #13  
Maxima91
Guest
 
Posts: n/a
Originally posted by erty67
tell ya what....look at my car and you decide I have black chrome altezzas.

...there are other pics on my homepage

:gay:
Old Mar 30, 2003 | 10:23 AM
  #14  
erty67's Avatar
Decal Specialist
iTrader: (104)
 
Joined: Jun 2001
Posts: 6,755
Originally posted by Maxima91


:gay:
what a helpful post If you don't like it, don't look at it.
Old Mar 30, 2003 | 10:26 AM
  #15  
metallic97gxe's Avatar
Master Will
iTrader: (3)
 
Joined: Sep 2000
Posts: 5,270
From: Metter,Ga
Originally posted by erty67


what a helpful post If you don't like it, don't look at it.





Old Mar 30, 2003 | 11:57 AM
  #16  
Naujik's Avatar
Senior Member
 
Joined: Mar 2003
Posts: 208
Looks best in the evening though don't you think? Seriously...
Old Mar 30, 2003 | 12:04 PM
  #17  
fearthegecko's Avatar
Most Perverted Member of the SE-L Club
 
Joined: Jul 2002
Posts: 1,506
i had chrome altezzas, and the only time i liked them was at night. During the day, they were much too ricey. Now i have red/clears, and i'm happy as a fly on ****.
Old Mar 30, 2003 | 03:39 PM
  #18  
97blackSE's Avatar
Senior Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 2,067
From: Connecticut
RED/CLEARS are
1)Cheaper
2)Cooler
3)Less Ricey
4)A DIY mod you can be proud of
5)Let ppl know You're unique

If you have a 95/96 i would get cheap e-bay altezzas, and then do the skyline mod...
Old Mar 30, 2003 | 03:53 PM
  #19  
danimsta's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Nov 2002
Posts: 1,082
hmm skyline mod does sound good

and i was also probly gonna get the black chrome altezzas...
but i am just afraid that ill mess up on the skyline mod lol
Old Mar 30, 2003 | 03:53 PM
  #20  
willis's Avatar
My heroine
iTrader: (2)
 
Joined: Feb 2003
Posts: 816
From: New Jersey
not gen 1.. get gen 2

if you're getting altezza's get the 2nd gen ones, the first gen one's imo look kinda cheap... second gens look cooler and the black chrome doesn't have a chrome ring around the outside.. but whateve makes you happy.. good luck

wJ
Old Mar 30, 2003 | 07:17 PM
  #21  
ZeRo MaX's Avatar
Donating Maxima.org Member
iTrader: (4)
 
Joined: Apr 2002
Posts: 2,255
Re: not gen 1.. get gen 2

Originally posted by willis
if you're getting altezza's get the 2nd gen ones, the first gen one's imo look kinda cheap... second gens look cooler and the black chrome doesn't have a chrome ring around the outside.. but whateve makes you happy.. good luck

wJ
I agree.. get gen 2... it looks so good on a black max... pics will be out soon!
Old Mar 30, 2003 | 07:23 PM
  #22  
danimsta's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Nov 2002
Posts: 1,082
Re: not gen 1.. get gen 2

Originally posted by willis
if you're getting altezza's get the 2nd gen ones, the first gen one's imo look kinda cheap... second gens look cooler and the black chrome doesn't have a chrome ring around the outside.. but whateve makes you happy.. good luck

wJ

i might remember correctly
but i belive he said he had a 96...
and they dont gen 2 gunmetal/black chrome that i know of yet...
and if they do
tell me where to sign!
Old Mar 30, 2003 | 08:08 PM
  #23  
willis's Avatar
My heroine
iTrader: (2)
 
Joined: Feb 2003
Posts: 816
From: New Jersey
Re: Re: not gen 1.. get gen 2

Originally posted by danimsta



i might remember correctly
but i belive he said he had a 96...
and they dont gen 2 gunmetal/black chrome that i know of yet...
and if they do
tell me where to sign!
well.. in that case i'm an idiot.. sorry, it's been a long weekend..

wJ
Old Mar 30, 2003 | 08:39 PM
  #24  
bombtrack_ratm's Avatar
Senior Member
 
Joined: Jan 2003
Posts: 446
From: Innisfil, Ontario
Gen 3's

NO, dont get Gen 2's... I hear too many bad things about them. Get the new Gen 3's. I am told they are guaranteed not to leak because Gen 2's havnt been fitted properly when being made.
I thought i would mention this, just to put my 2 cents in.

Please take my advice, if you get any Altezza's please get Gen 3's
Old Mar 31, 2003 | 12:23 AM
  #25  
fearthegecko's Avatar
Most Perverted Member of the SE-L Club
 
Joined: Jul 2002
Posts: 1,506
Re: Gen 3's

Originally posted by bombtrack_ratm
NO, dont get Gen 2's... I hear too many bad things about them. Get the new Gen 3's. I am told they are guaranteed not to leak because Gen 2's havnt been fitted properly when being made.
I thought i would mention this, just to put my 2 cents in.

Please take my advice, if you get any Altezza's please get Gen 3's
it also depends where you got your altezzas from. I had gen 1 altezzas, and the right one fit perfect, and the left was like 2mm off. Take a look at happyricefob's (i'm pretty sure it's him, if not, rain flames down upon me). They don't fit as well. Plus, i've seen tons of other people's who looked like ****.
Old Mar 31, 2003 | 12:02 PM
  #26  
Max-2-GTR's Avatar
Senior Member
 
Joined: Sep 2002
Posts: 500
Re: Gen 3's

Originally posted by bombtrack_ratm
NO, dont get Gen 2's... I hear too many bad things about them. Get the new Gen 3's. I am told they are guaranteed not to leak because Gen 2's havnt been fitted properly when being made.
I thought i would mention this, just to put my 2 cents in.

Please take my advice, if you get any Altezza's please get Gen 3's
gen3 ? is it those that looks like skyline tails?
Old Mar 31, 2003 | 12:19 PM
  #27  
waveridr85's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Mar 2003
Posts: 1,946
Originally posted by MaxRookie
Oh yeah, and what does "ricey" mean? Weird-looking or something?
go ahead and get em, get a spoiler tooo, and maybe some nos stickers, and a super street window banner..... get my drift?
Old Mar 31, 2003 | 02:36 PM
  #28  
VanHowie's Avatar
Thread Starter
Member
 
Joined: Feb 2003
Posts: 223
From: San Diego
God D@mn I got a lot of responses! Do any of yall think the red/clears will be available soon at custommaxima.com? Cause it seems like they come out w/ new stuff on a consistent basis - like every three weeks. They came out w/ a carbon fiber hood, so I mean if they came out w/ that, they must be working on these red/clears for a 95-96. Plus they're being requested so much. Yall agree? Also, how hard is the doityourself part of red/clears if I ever get em?
Old Mar 31, 2003 | 02:40 PM
  #29  
VanHowie's Avatar
Thread Starter
Member
 
Joined: Feb 2003
Posts: 223
From: San Diego
Oh yeah, and I still don't know what ricey means. I get a sense that it means weird looking. Am I right?
Old Mar 31, 2003 | 04:26 PM
  #30  
wordjb's Avatar
Member
 
Joined: Nov 2002
Posts: 92
It means that your @ss is lookin' like a Civic.
Old Mar 31, 2003 | 05:47 PM
  #31  
ZeRo MaX's Avatar
Donating Maxima.org Member
iTrader: (4)
 
Joined: Apr 2002
Posts: 2,255
Re: Re: Gen 3's

Originally posted by Max-2-GTR


gen3 ? is it those that looks like skyline tails?
Didn't know there was even a gen 3....
Old Mar 31, 2003 | 05:58 PM
  #32  
dantemaxx's Avatar
Member
 
Joined: Mar 2003
Posts: 47
Re: Honestly - Black Chrome Altezzas?

Originally posted by MaxRookie
All right I need to decide whether I'm going to get black chrome altezzas for my black '96 Maxima SE or just let the taillights be. What I need from you is your honest opinions. Will black chrome look good on a black max?
i have black chrome altezzas on my black 95. i will have pics in a few days, email me and ill get them to you asap. they look hot.
peace
asdf154@aol.com
Old Mar 31, 2003 | 08:16 PM
  #33  
erty67's Avatar
Decal Specialist
iTrader: (104)
 
Joined: Jun 2001
Posts: 6,755
Originally posted by MaxRookie
Oh yeah, and I still don't know what ricey means. I get a sense that it means weird looking. Am I right?
This should help you figure it out

http://www.riceboypage.com/index.html
Old Mar 31, 2003 | 11:10 PM
  #34  
bombtrack_ratm's Avatar
Senior Member
 
Joined: Jan 2003
Posts: 446
From: Innisfil, Ontario
About the Gen 3's. They just came out(assuming this year) and are guaranteed by a car shop not to leak. They are not the Skyline ones with the painted bezel. those are a completely different light. these ones i hear look alot, if not exactly, to the Gen 2's, just fitted perfectly to 95-96 Max. I think Gen 3's are alreayd out for the rest of the model years in the 4th Gen. I found prices for them at around $185.00 US (I am in Canada) Other then that, that's about I can inform you as of right now. I will continue to post new information as it is brought to me.
Old Mar 31, 2003 | 11:19 PM
  #35  
Max-2-GTR's Avatar
Senior Member
 
Joined: Sep 2002
Posts: 500
Originally posted by bombtrack_ratm
About the Gen 3's. They just came out(assuming this year) and are guaranteed by a car shop not to leak. They are not the Skyline ones with the painted bezel. those are a completely different light. these ones i hear look alot, if not exactly, to the Gen 2's, just fitted perfectly to 95-96 Max. I think Gen 3's are alreayd out for the rest of the model years in the 4th Gen. I found prices for them at around $185.00 US (I am in Canada) Other then that, that's about I can inform you as of right now. I will continue to post new information as it is brought to me.
Have any pics?
Old Mar 31, 2003 | 11:37 PM
  #36  
bombtrack_ratm's Avatar
Senior Member
 
Joined: Jan 2003
Posts: 446
From: Innisfil, Ontario
No pics...yet. i will pick some up(definitly within next month or so). Until then i jsut have a website to go to if u want to see prices. the Prices are there, but no pics
http://www.airdynamicracing.com/shop...ml?p=5&large=1
that's the best i can do. Other then that, i am sorry, going to have to wait until i pick some up. i will talk to my car guy becasue he has seen pics and i would like to see. If i can find where they are, i will send them on here.
Old Apr 1, 2003 | 05:08 AM
  #37  
ZeRo MaX's Avatar
Donating Maxima.org Member
iTrader: (4)
 
Joined: Apr 2002
Posts: 2,255
nice.. but i still like gen 2 better! :-)
Old Apr 1, 2003 | 05:53 AM
  #38  
BlueBOB's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Sep 2002
Posts: 649
Just to show you a 95/96 with red/clears (kinda). We custom smoked these taillights.

Enjoy!
Old Apr 1, 2003 | 11:48 AM
  #39  
dantemaxx's Avatar
Member
 
Joined: Mar 2003
Posts: 47
Originally posted by bombtrack_ratm
About the Gen 3's. They just came out(assuming this year) and are guaranteed by a car shop not to leak. They are not the Skyline ones with the painted bezel. those are a completely different light. these ones i hear look alot, if not exactly, to the Gen 2's, just fitted perfectly to 95-96 Max. I think Gen 3's are alreayd out for the rest of the model years in the 4th Gen. I found prices for them at around $185.00 US (I am in Canada) Other then that, that's about I can inform you as of right now. I will continue to post new information as it is brought to me.
i highly doubt the gen3's altezzas are out. if so, how sure are u that they fit the 9596 models? let me know, im very interested.
Old Apr 1, 2003 | 02:05 PM
  #40  
jlsund's Avatar
Senior Member
 
Joined: Mar 2003
Posts: 133
hmmm

hmm. those tails look good (well, a hell of a lot better than any other car (besides the Is300). But, maxrookie. id check out the 4 peice red/white config. they're pretty nice (if thats ur taste)



All times are GMT -7. The time now is 10:37 PM.