self diagnosis for SES gives me the code 05 10

Reply Subscribe

Thread Tools

Search this Thread

Oct 13, 2003 | 09:19 AM

djbrown

Thread Starter

-Da MTL Brown Boi-

Joined: Oct 2003

Posts: 117

self diagnosis for SES gives me the code 05 10

And I Checked With The Ecu Decoder But Its Says Undefined
What To Dooooooooo I Rechecked Several Times
Always Give Me The Same Code

Oct 13, 2003 | 12:57 PM

outsider

Senior Member

Joined: Jul 2003

Posts: 779

according to the hanyes manual if you did it with the light method 0510=downstream oxygen sensor maximum voltage montior fault
if you use the scan tool p0510= closed throttle position switch or circuit fault

Oct 14, 2003 | 07:20 AM

slfalco

Member

Joined: Nov 2002

Posts: 237

From: Hyde Park, NY

I have a 99 SE, Calif spec emissions, and that code was the right rear O2 sensor (my car has 4 sensors). Replaced it, problem has not come back.. Sensor was about 70 bucks from Courtesy Nissan...

Oct 14, 2003 | 07:48 AM

99CTMAXSE

Member

Joined: May 2002

Posts: 72

Slfalco,
I have the same code. Did you replace the sensor yourself? If you did, was it the rear sensor that plugs next to the rear of engine, or was it the sensor that plugs in the front of the engine by the 2 front o2 sensors plugs. I want to make sure I replace the correct sensor. Thanks for the help, the SES light has been on for months. Its diving me nuts.