EVAP canister purge volume control valve??

Reply Subscribe

Thread Tools

Search this Thread

Aug 16, 2007 | 05:39 PM

#41

jteer1971

Newbie - Just Registered

Joined: Aug 2007

Posts: 8

Our code was P0443...Will that be the correct part for that code?

Aug 22, 2007 | 06:27 PM

#42

chasMAX

Supporting Maxima.org Member

Joined: Jul 2003

Posts: 38

From: Atlanta, GA

Jteer1971...pull the connector plug from your ECPVC as shown in the great pics above and check the pins ON THE VALVE as suggested using an ohm-meter. I imagine you'll find that it's faulty considering the code you have.

Shell...where did you end up buying one instead of the Stealership?

Aug 23, 2007 | 12:17 PM

#43

Graem

Senior Member

iTrader: (2)

Joined: Feb 2007

Posts: 109

Quote:

Originally Posted by sterling99SEL

Just after replacing my knock sensor, I'm getting these three EVAP-related codes:

Is it likely I could have damaged my EVAP control valve or knocked a harness loose possibly?

Yes, you most likely unplugged the harness to get at your knock sensor and did not put it on properly. Thats exactly what i did and after clipping in the harness i lost my ecu codes

Mar 11, 2009 | 12:05 AM

#44

C-ko

Junior Member

Joined: Sep 2008

Posts: 91

From: Newton, MA

i've had this exact same problem with the EVAP Purge Volume Control Valve. In the pics in the previous page, is the evap purge volume control valve the metal part or the plastic part?

Mar 11, 2009 | 12:38 AM

#45

pmohr

No more Maximas...

iTrader: (26)

Joined: Jul 2005

Posts: 14,329

From: Oak Ridge, TN

Quote:

Originally Posted by C-ko

i've had this exact same problem with the EVAP Purge Volume Control Valve. In the pics in the previous page, is the evap purge volume control valve the metal part or the plastic part?

Did you not read his post? It's the entire thing.

Bumping a 2 year old thread for not reading, and after you already got your answer in the newbie thread

Last edited by pmohr; Mar 11, 2009 at 01:06 AM.

Dec 21, 2009 | 06:09 AM

#46

bebekhijau

Joined: Nov 2009

Posts: 16

will this canister can be used forever or how will i know it should be replaced?

Dec 21, 2009 | 08:44 AM

#47

cashoit

Senior Member

Joined: Sep 2009

Posts: 4,005

From: Worcester, MA

the canister and the valve are too differnent things.

I had this issue and it was cuz the wire harness fo rthe valve was all corroded and and new wires needed to be connected.

I wd say these thing last forever. jus trace the wires to see if there is a short. Or check the FSM for troubelshooting