Well I just got my Warpspeed Y-Pipe, going to install it tomorrow, I cant wait. But now I'm in my performace mod stage, so I was considering getting an aftermarket b-pipe and even a muffler. Heres the catch, I'm not a fan of a lot of noise, I don't want to sound like rice, I want it to sound as close to stock as possible. Will adding a b-pipe and muffler change this? What suggestions do you guys have on b pipes and mufflers. Just so you have an idea of what I mean, I think that my intake noise at WOT is too much for me, let me know, thanks!

 

FaQ U

 

bah to you luke...

 

get a resonated b-pipe.

www.budgetexhaust.com click the top link, not the bottum exhaust part. keep in mind, prices are canadian. many people suggest a 5th gen muffler to finish off our exhaust. either way, make sure you get a resonated b pipe if you want quiet.

 

Will I still get the gains in power if its resonated?

 

if u wanna keep it quiet, get apexi WS catback... it'll fit perfectly cuz u have a 95.

quietest aftermarket muffler is magnaflow street series. u can also consider get 5th gen muffler, looks nice.

any aftermarket b-pipe with resonator will keep it quiet, but louder than stock. for NA all u need is 2.25" inlet all the way. resonator will not affect exhaust flow.

my current setup sounds like this:

3,000rpm or lower = nice
3,000rpm or higher = rice

warpspeed y-pipe removes two of my pre-cat, some rice sound is expected at higher rpm, but i don't care. cuz i rev 98% under 3,000rpm, and with magnaflow muffler it sounds nice and deep.

 

well if I buy a aftermarket b pipe with resonator, where will teh increase in power come from? whats the purpose of it? also, I think I would go with a 5th gen muffler for the sake of trying to make it sound liek stock.

 

my magnaflow is silly loud. i wouldn't reccomend it. 5th gen muff...ya!

 

well if u get a b pipe it will replace the restricint that the stock pipe has after the resonator, so ya it will give u some increase in power....i think around 5 whp

 

I was wanting the same thing. I got it. refer to these threads and if you have any other questions, just ask:

http://forums.maxima.org/showthread.php?t=279666

http://forums.maxima.org/showthread.php?t=280204

http://forums.maxima.org/showthread.php?t=281461

Hope this helps....I will try to get some pics up this weekend. I got my 5th gen muffler on, and it looks really good. I am not quite through with the bumper, but when I am, it will look excellent. (I had to cut the hole a little larger in the bumper because the 5th gen one has two pipes.)

 

Get a resonated warpspeed b pipe and a dynomax super turbo muffler and your all set.

 

By all set, what do you mean? LIke mroe HP gains with minimal loudness? Of course I know my exhaust will sound loud, but I'm trying not to get really loud, or even moderately loud.

Someone tell me the sound that will come out of this:

Warpspeed Y-Pipe, Budget B-Pipe with resonator (or any other bpipe with resonator), stock muffler or 5th gen muffler??

Let me know thanks

 

Let me know how your installation goes on the y-pipe, cause i cant get my bolts off... let me know what you did if you get it to work out

 

warpspeed is coming out with their own muffler and full catback system...and you get to chose the fit, finish, and style of tip!!!

 

warpspeed is coming out with their own muffler and full catback system...and you get to chose the fit, finish, and style of tip!!! as well as the size

 

Well I just finished installing the Y-pipe at 3:30 AM eastern...man what a job, had to run to home depot 3 times to get tools. The first thing I would suggest is getting some kind of WD-40 liquid, I used liquid wrench, and man it worked wonders. I was able to get the bolts between the cat and the end of the y pipe off with just liquid wrench and a 1/4" rachet set. The rest was way more difficult. Spray the bolts often with the liquid wrench, get a larger size rachet, like 1/2" for more torque. We eventually went and got a breaker bar, and that did the job. After you get the bolts off, put some anti-seize thread gunk, so you wont have this problem again in the future.

And one more thing, I can hear the difference, its very low in sound, not loud at all, I like it, its mean.

 

thank you! Ill give it one more attempt.... if not some dude at meinke will do it under the table for 50