mAxPwEr4Us

iTrader: (1)

Hello there!!

I'm trying to buy a keyless entry remote for my 1996 5sp gxe(i think). I'm gonna buy it off ebay. the sellers always say. "check your local dealer before bidding" to match the FCC ID. so i called my local nissand dealer. and all they gave me was a part number and didn't even take my VIN #. so my question is how can i find out which one of those keys will work for my car? thank you very much for you time and replys

njmodi

iTrader: (4)

Do you have a keyless remote right now? If you do, buy one that looks exactly the same - it will work.. if you don't already have keyless entry (or the system installed), you'll need more than just hte remote (not trying to state the obvious).

mAxPwEr4Us

iTrader: (1)

I'm not sure if i have it or not, but there's a security light right under my gagues. and security stuff under my hood, like fuses and stuff. so i guess my first questions should be how would i know if have a the keyless feture n my car? thanx

|Bijan|

iTrader: (12)

If the red LED blinks...then you have it and it works. All you need is the remote.

No need to check anything else. I did the same thing.

mAxPwEr4Us

iTrader: (1)

Thank you very much for the info. I do have the red LED and it does blink so im just gonna go ahead and buy it and test it once again thank you very much for the replys and time

P.

njmodi

iTrader: (4)

Good luck - there are programming instructions available here http://home.earthlink.net/~maxfaq/ under the Maintenance tab - so don't pay more for one that includes instructions on Ebay... its very simple.

|Bijan|

iTrader: (12)

I paid $15 for min off ebay.......VERY glad I did. Keyless is tha shiit!

DONT FORGET!!

Press unlock 3x and windows go down!

Brudaddy

iTrader: (2)

If you happen to know anyone that works at a dealership, I would recommend paying them a visit. Most dealerships that take in trades, have trouble with keys and such. Therefore, there are a lot of lost keys that don't go to anything, and also FOB's with these lost keys. I picked up 3 FREE remotes when I worked at the dealership. I did the same thing for a few of my friends. I mean, I worked at a Jeep/Chrysler dealership and we had Nissan Maxima FOBs....what were we going to use them for.

Just a suggestion....

nearthisbridge

iTrader: (19)

Awesome, that's exactly what I wanted to hear (I have the same situation as the original poster). Thanks for the info.

UTIMaxima

iTrader: (2)

I have all that stuff too,(c&c package) and I couldn't get it to work

|Bijan|

iTrader: (12)

C&C??

Did you follow the correct instructions?

UTIMaxima

iTrader: (2)

yeah, following the procedure, the lights flash and everthing, it just won't take. Battery is good. I think I may need one of these:

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

Anyone know what this plugs into or where it is located?

Nozama

iTrader: (1)

Right side of trunk near antenna, if the box isn't there the wires should be.

|Bijan|

iTrader: (12)

UTImax - do you try ALL the buttons? If NONE work, I guess that module is bad...

UTIMaxima

iTrader: (2)

I think so, I pretty much tried everything, numerous times. I'll get into the trunk today and see if that module is even there.

luga982

hey uti,
what did u discover?
any luck?

mAxPwEr4Us

iTrader: (1)

I'm still waiting n mine. i really hope i dont run into any problems. Today was a really bad day. n the afternoon i found out i had to replace breaks, control arm n both sides. taking the car out of the shop i accidently hit the corner and broke my left foglight and a very small piece of my clear conner light, and a bit of damage n the bumper. at night went down to 7/11 and hit the damn sidewalk and scratch about 2 inches of my driver side front and rear rim, i hope nothin bend. been driving for 5 years and nothin like this has EVER happen to me

96white

If i dont have the C&C package can i just get this?

ptatohed

iTrader: (12)

What do you mean press unlock 3 times and the windows will roll down? It has nothing to do with the number of times you press it, it has to do with the duration you hold it (the unlock button). Right?

luga982

hey y'all,
i got the module today, and i plugged the ground wire and the pin in the back(prewired plug and play switch) anyway, if i hit the nail on the head.----------------that **** didn't work like there was no current or something.
what should i do? i want this keyless entry thing.
even though i have a remote starter installed in the car already.
when i try the programming procedures- lock the dorr and put the key in and out more than six times in a second, fabooooooooo --------==the blinkers don't blink for ****.
any suggestions?

UTIMaxima

iTrader: (2)

I discovered that the module is indeed there. Still don't know why I can't get it to work. What I'm thinking is that the module probably only has the capacity for 2 or 3 remotes, the original owner may have had remotes programmed and never cleared out of there. I don't really know, but that's how it is with volvo's, you can't just keep adding remotes, you have to erase the old ones via a diagnostic tool. I'm going to try to unplug the module for a while, hopefully it will reset itself or something, then I'll try it again. This is a bit of a shot in the dark, but what the heck. I'll let you guys know how it turns out. If it dosen't work, I'll have to take it to the dealership and get them to do it.

UTIMaxima

iTrader: (2)

I have no idea.

ogparjay

I don 't use my keyless entry anymore cause i dropped the thing too many times and it's hyper sensitive. I'm affraid that it my unlock when I walk away while in my pocket. Used autolock instead.