14.3's what mods?
#2
here is any easy answer just ask him!!
Originally Posted by lex4style
A friend of mine as an auto maxima. He ran in the 14.3's . NO SC or Turbo. He just had mods. What mods would you think he had? Thanks
#4
so your saying that your friend is running a 14.3 with just torando air i highly doubt that.its impossible. so he gained like 50 + horsepower huh
Originally Posted by maxfanfromohio
Two words - tornado air.
#5
Originally Posted by chuckie311
so your saying that your friend is running a 14.3 with just torando air i highly doubt that.its impossible. so he gained like 50 + horsepower huh
Nah dude, it was a joke. Tornado Air doesn't work.
#6
It's a joke.
He may have every bolt-on available. I know that Ceasar's running 14.1 and he has just about everything except for JWT cams and he's a 5spd. Your friend may have put a lot of money into his car or he's lying to you
~THT
He may have every bolt-on available. I know that Ceasar's running 14.1 and he has just about everything except for JWT cams and he's a 5spd. Your friend may have put a lot of money into his car or he's lying to you
~THT
#8
nice number.have a question for you. did you feel a big difference when you had the UR underdrive pulley put on.im thinking of getting one but im not sure yet
Originally Posted by 96sleeper
I ran a 14.2 as an auto, and I have quite a bit done.
#11
why dont you click on this its his car page hes not lying Visit here for mods.he has his time slips posted
Originally Posted by kingrukus
Did you see a time slip? If not, he is probably lying.
#12
i install my mevi in june and i lost all my low end power in now running about .2 thenths of a sec slower in the 1/4 mile.. so im trying to get the ecu upgrade from techno if they eve get it.im trying to talk to the guy into using my car for anything the need to do since i work right around where there shop is
Originally Posted by takentomax
it's about 4-5 hp, I don't think that you will "feel" much.
#13
Originally Posted by chuckie311
why dont you click on this its his car page hes not lying Visit here for mods.he has his time slips posted
Who are you referring to? I was referring to lex4style's friend in which no link was provided for his friend outlining the friend's mods/time slips, or else this thread would have never been created.
#15
you will deffinetly be runnig 14.2'z with this setup.
1. Intake
2. Y-pipe
3. Mevi
4. Ecu
thats all you really need in a maxima to run low 14'z
Kenny
1. Intake
2. Y-pipe
3. Mevi
4. Ecu
thats all you really need in a maxima to run low 14'z
Kenny
#18
Supporting Maxima.org Member
iTrader: (5)
Join Date: Jul 2003
Location: san antonio, Tejas
Posts: 2,336
Originally Posted by pLoMaXiMuS
you will deffinetly be runnig 14.2'z with this setup.
1. Intake
2. Y-pipe
3. Mevi
4. Ecu
thats all you really need in a maxima to run low 14'z
Kenny
1. Intake
2. Y-pipe
3. Mevi
4. Ecu
thats all you really need in a maxima to run low 14'z
Kenny
5. good driver
#20
do u know if he has any serious weight reduction done, that can help a lil. any tranny work done. was he on street tires. does he have a slip or can he tell us what his reaction time was, or his 60ft was. was it a 1/4 or a 1/8 run(lol)
#23
I have the following
1. CAI
2. VBmod
3. Y-pipes
4. UD pulley
5. ECU upgrade
Your not really gonna see low 14's I'm auto high 14's yes, going 5spd within the month or so, imagine all the mods+5spd+act clutch... Now thats low 14's...
1. CAI
2. VBmod
3. Y-pipes
4. UD pulley
5. ECU upgrade
Your not really gonna see low 14's I'm auto high 14's yes, going 5spd within the month or so, imagine all the mods+5spd+act clutch... Now thats low 14's...
#24
Im going to have to get a dyno after the MEVI/JWT ECU and headers are in cause low 14's would be great.
#27
14.3 in auto with cat-back,y-pipe-,mevi,ecu upgrade seems a little off.
Like was stated before, Ceaser is 5 speed and a h#ll of a driver and he's at 14.1
Then you have 96sleeper whos telling you hes got quite a bit done and he's running 14.2
I gotta call bs unless a time slip is posted.
Unless that "something else" he has is NO2
chuckie311
When you installed the MEVI did you have any kind of perfromance ecu such as TS or Gforce?
Just curious to see how the MEVI does with a modded ecu lacking the raised limiter.
Like was stated before, Ceaser is 5 speed and a h#ll of a driver and he's at 14.1
Then you have 96sleeper whos telling you hes got quite a bit done and he's running 14.2
I gotta call bs unless a time slip is posted.
Unless that "something else" he has is NO2
chuckie311
When you installed the MEVI did you have any kind of perfromance ecu such as TS or Gforce?
Just curious to see how the MEVI does with a modded ecu lacking the raised limiter.
Thread
Thread Starter
Forum
Replies
Last Post
zzznightmarezz
Maximas for Sale / Wanted
0
09-21-2015 06:32 PM