Anyone have the OBX headers installed?!
#3
maxima.accessjdm.com has some threads links discussing this topic...
#9
Originally Posted by DAVE Sz
Just look at the design. See how the rear manifold pipe just slams into the exhaust stream from the front pipe?
#10
Originally Posted by DAVE Sz
Just look at the design. See how the rear manifold pipe just slams into the exhaust stream from the front pipe?
If you get just the manifolds your doing jack ****, they wont help out. If you get the "headers" you can see by the design that the way the pipes meet in a perpendicular T it totally kills the flow. Now I know you shouldnt be taking advice from me cuz I am a total ricer with a dual exhaust but I know what I'm talking about. Check out the OBX catback.. the quality is sub par. Sure people are going to like it but only cuz of the price. Guess what the B pipe hangs too damn low and you have to get it adjusted just right with some hangers. I dont know about you but when I get any kind of aftermarket part I would hope the company tries to engineer it to fit as best as possible. Alright let me stop rambling and go mind my own business.
Maximus_Pr Soy Boricua but I live in Brooklyn, New York like Dave said.
#11
but still no one has dynoed them or even installed them. I have a set that I got as a free sample and the construction is pretty good on them. It's just a question of if they would make power or not.
If someone wants to actually install them and dyno test them, I'll sell you this set that I have for well below cost.
Just send me an email.
Regards,
Bryan
bryan@berktechnolgy.com
If someone wants to actually install them and dyno test them, I'll sell you this set that I have for well below cost.
Just send me an email.
Regards,
Bryan
bryan@berktechnolgy.com
#12
Originally Posted by cobymoby
but still no one has dynoed them or even installed them. I have a set that I got as a free sample and the construction is pretty good on them. It's just a question of if they would make power or not.
If someone wants to actually install them and dyno test them, I'll sell you this set that I have for well below cost.
Just send me an email.
Regards,
Bryan
bryan@berktechnolgy.com
If someone wants to actually install them and dyno test them, I'll sell you this set that I have for well below cost.
Just send me an email.
Regards,
Bryan
bryan@berktechnolgy.com
Email sent..
#17
The original question was are they worth buying...if they're better than the factory setup wouldn't they be an improvement?! No one has any real-time information on them so everything is hearsay until I hear sound clips, dynos, etc.
#18
Originally Posted by Linkage23
The original question was are they worth buying...if they're better than the factory setup wouldn't they be an improvement?! No one has any real-time information on them so everything is hearsay until I hear sound clips, dynos, etc.
it seems this is going to be answered anytime soon at last someone with the guts to actually try them where going to find out thanks to him
#20
Of course they give better gains than the ypipe. You're looking at a 5-7hp gain at the wheels. I'm guessing some low end torque will be lost and some high end HP will be gained. It's not worth it to a person with an after market ypipe. For a stock max I'd suggest you buy them if it seems worth it to you.
#24
Originally Posted by sagamax
who sells the obx headers and how much???
is it worth getting rid of my current y pipe for them???
is it worth getting rid of my current y pipe for them???
ebay ~$350
No, unless you have alot of free time to do the install and can sell your current y-pipe for sure.
#28
I getting them from the manufacturer that OBX buys them from. They are the same header, it just doesn't come in an OBX box.
No one has any idea how much power these things make. They may make a crap load of power, they may do nothing. 1FastMax will be testing these for me and will lay down the final truth to whether or not they are worth it or not.
No one has any idea how much power these things make. They may make a crap load of power, they may do nothing. 1FastMax will be testing these for me and will lay down the final truth to whether or not they are worth it or not.
#29
Are there other header dyno info out there? I thought someone got headers; not cattman or HS, but some other company, either stone racing or stillen. I could have sworn they lost power with them. Am i out of my mind?
#32
Originally Posted by optimus310
you are brave Al. Will be nice to actually see some opinions maybe dyno and sound clips on these headers. Keeps us posted
I'm sending the headers out to 1fastmax tomorrow, he should have them on by Sunday if all goes well. At least the preliminary results will be out by then by what the user feels.
The weekend after that hopefully the dyno results will be out. If the power is there I'll sell these headers for cheaper than anyone else. Probably for $300 shipped during a 10+ group buy.
#33
Originally Posted by cobymoby
I know you got the cattman headers, did you ever get a chance to dyno them?
I'm sending the headers out to 1fastmax tomorrow, he should have them on by Sunday if all goes well. At least the preliminary results will be out by then by what the user feels.
The weekend after that hopefully the dyno results will be out. If the power is there I'll sell these headers for cheaper than anyone else. Probably for $300 shipped during a 10+ group buy.
I'm sending the headers out to 1fastmax tomorrow, he should have them on by Sunday if all goes well. At least the preliminary results will be out by then by what the user feels.
The weekend after that hopefully the dyno results will be out. If the power is there I'll sell these headers for cheaper than anyone else. Probably for $300 shipped during a 10+ group buy.
Anyway if these things do offer good gains then cattman better watch his back. The price is just so hard to compete with.
Good luck man!
#34
Originally Posted by I30tMikeD
really, I didn't notice
#37
i was talking with a friend of mine that owns a 2000 accord and he has obx headers the desing is very similar to ours he told me he did a dyno just after he installed the headers he noticed 21hp gain at 4800rpm aprox, not bad after all if you can have a few extra hp over to what you get with y-pipe alone is good
#38
Originally Posted by DAVE Sz
It looks jaggy. PHOTOBUCKET kinda does it weird. If your pic is more than 250kb, instead of resizing it to 250kb they resize it to less than 100kb.
#39
Originally Posted by maximus_pr
i was talking with a friend of mine that owns a 2000 accord and he has obx headers the desing is very similar to ours he told me he did a dyno just after he installed the headers he noticed 21hp gain at 4800rpm aprox, not bad after all if you can have a few extra hp over to what you get with y-pipe alone is good
#40
Originally Posted by cobymoby
I'm hoping that these headers have simlar gains as well. On custommaxima's site they are going for $500. I will be able to supply these for around $300. The main deciding factor of whether or not I bring this in is if the numbers are there for the sales.
aren't they selling the cattman's header?
-------------------------------------------------------------------
nevermind they are selling both