4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Could it be my brake calipers??????

Thread Tools
 
Search this Thread
 
Old 03-13-2005, 06:41 PM
  #1  
Senior Member
Thread Starter
 
zachosz's Avatar
 
Join Date: Apr 2004
Posts: 131
Could it be my brake calipers??????

I get this really annoying vibration when i step on my brakes, it sucks! It happens at any speed, even 5mph and its rythmic, which makes me think its warped rotors. I think somebody here on the forums said it could also be the calipers??? How possible is that? I'll be getting new rotors soon, i just want to see how many people had problems with their calipers. I need an excuse for 300ZX TT brakes.....
zachosz is offline  
Old 03-13-2005, 06:56 PM
  #2  
Supporting Maxima.org Member
iTrader: (10)
 
konak85's Avatar
 
Join Date: Nov 2004
Location: NJ
Posts: 2,314
Theres a fair chance it could be the calipers. Change the rotors and pads first. Check the rubber sleeve that covers the caliper piston if it is torn, you should change it if it is torn.
konak85 is offline  
Old 03-13-2005, 07:06 PM
  #3  
Senior Member
iTrader: (10)
 
maxima_kenny96's Avatar
 
Join Date: Jan 2005
Posts: 1,450
I dont see what would cause the rotors to do that...I personally think it is warped rotors and maybe ur pads, but it just seems logical that it would be ur rotors, get some new ones, and if it doesnt fix ur problem...I guess you can say I was wrong.
maxima_kenny96 is offline  
Old 03-14-2005, 07:30 AM
  #4  
Senior Member
Thread Starter
 
zachosz's Avatar
 
Join Date: Apr 2004
Posts: 131
Yeah I'll be changing the rotors pretty soon, once the weather gets a little better. The pads are practically new so i don't think it's that. Thanks for the replies.
zachosz is offline  
Old 03-14-2005, 09:05 AM
  #5  
Junior Member
 
fiddyonefiddy's Avatar
 
Join Date: Jan 2005
Posts: 26
i just did the brakes on mine i noticed that the calipers were sticking, i had the same problem as you as you braked the car shuddered and pulled to one side,sure enough both calipers were sticking.
so replace the rotors and check your calipers for sticking. if they are sticking they will warp the rotors from getting so hot ,especially nissan factory rotors
if they get wet when they are hot instant warpage.
fiddyonefiddy is offline  
Old 03-14-2005, 10:59 AM
  #6  
eturnl
Guest
 
Posts: n/a
Originally Posted by fiddyonefiddy
i just did the brakes on mine i noticed that the calipers were sticking, i had the same problem as you as you braked the car shuddered and pulled to one side,sure enough both calipers were sticking.
so replace the rotors and check your calipers for sticking. if they are sticking they will warp the rotors from getting so hot ,especially nissan factory rotors
if they get wet when they are hot instant warpage.
I have the same problem, I've already changed my rear brakes about 12k miles ago with raybestos premium roters and QS pads. its time for a front replacement!

fiddyonefiddy, this might be a silly question, but how do you check for sticky calipers? Can you try to be as specific and thorough as possible in your explanation please?

(only way i think to check, is to hit the brakes once the calipers are off. but im not sure i'll know the actual difference in 'stickyness' compared to a smoothly operating caliper. is it that it either sticks or it doesnt, or are there degrees of stickyness? hehe. i'd appreciate your input.)
 
Old 03-14-2005, 12:15 PM
  #7  
Member
iTrader: (1)
 
jome80627's Avatar
 
Join Date: May 2002
Posts: 90
My car was making the same kinds of noises. I bought new rotors and pads. As i was installing the caliper, I noticed one of my calipers was frozen. Under the ruber boot was tons of rust. I had to go get both front calipers rebuilt and now they work great. So, make sure you check inside that rubber boot too!
jome80627 is offline  
Old 03-14-2005, 12:27 PM
  #8  
Senior Member
 
PAREDLINE's Avatar
 
Join Date: Apr 2003
Posts: 1,207
Yeah save up for some springs too. your car looks like a 4x4 rallye racer
PAREDLINE is offline  
Old 03-14-2005, 02:58 PM
  #9  
Offset Is Everything.
iTrader: (23)
 
MrDicks95SE's Avatar
 
Join Date: Sep 2003
Location: SoCal
Posts: 9,426
if you change the rotors youll have to change the pads as well. the pads may have worn down to the contours of the warped rotor making the surface uneven. using old pads on new rotors will wear down the rotor unevenly. so obviously change both at the same time when you have the chance.
MrDicks95SE is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
leatherneck
4th Generation Maxima (1995-1999)
1
09-30-2015 09:16 PM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM
Socalstillen
4th Generation Maxima (1995-1999)
1
09-26-2015 12:01 PM



Quick Reply: Could it be my brake calipers??????



All times are GMT -7. The time now is 07:20 AM.