Installing headers and y-pipe
#1
Installing headers and y-pipe (update)
I wanted to know how hard it is to install stone raing headers and y-pipe? I am having a friend do it in a garage with a lift and stuff and I just wanted to see how long it takes and how hard it was? Does anyone know?
#2
i know for the cattman headers people are saying 5-6 hours and as for the ypipe depending on rusted your bolts are and from the write ups ive seen not hard at all especially because hes gonna have the light so all in all tops if you dont run into any problems with the y-pipe then 7 hours tops and at least 6 only because of the headers there a pain ive heard
#5
Well I got them for a good price plus I heard with the other type of headers you have to cut something out. It is a stone raing y-pipe to. I read on there website it 's 19 wheel horsepower. I wasn't sure if that was true but I talked to someone with the same set up who dynoed at 18 wheel horsepower so maybe it does.
#7
Any header install will take around the same time to complete. Expect 10 hrs if you've never done it before.
You will cut down on that time if you take of the Intake manifold and also take off the crossmember. We did the job in about 7 hrs without taking the crossmember off but it would have helped immensely.
WARNING...don't be surprised if the Stone Racing Ypipe doesn't bolt up. Before you take off the stock headers check the fitment of the SR Ypipe and see if the flanges are correct. I had a prototype set but I have heard that the production doesn't fit either.
You will cut down on that time if you take of the Intake manifold and also take off the crossmember. We did the job in about 7 hrs without taking the crossmember off but it would have helped immensely.
WARNING...don't be surprised if the Stone Racing Ypipe doesn't bolt up. Before you take off the stock headers check the fitment of the SR Ypipe and see if the flanges are correct. I had a prototype set but I have heard that the production doesn't fit either.
#13
Originally Posted by the chariot
umass good luck with the project, once installed, drop me a pm and send me over a video of how they sound.
c
c
#15
Need help with y-pipe
My friend is trying to put my y-pipe and headers on. He took the stock y-pipe off and said that the y-pipe I have won't line up with the stock headers. Will it only work the the after market headers that come with it? This is the set up I have.
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
If anyone has used these before you know about this please respond back.
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
If anyone has used these before you know about this please respond back.
#23
Originally Posted by MrEous
Hey Caesar...I need to get a vid to you. Unfortunately my camera doesn't produce sound that well.
send it over , how big is the file, just drop me a pm with the details and we can go from there, rev it up man !!
#25
Here you go...I've explained the process before of what I had to do. Unfortunately for any Stone Racing customers, this problem will most likely never be resolved from them.
http://forums.maxima.org/showpost.ph...83&postcount=9
Good luck.
http://forums.maxima.org/showpost.ph...83&postcount=9
Good luck.
#27
Originally Posted by VinnieMax
Seems like it's better to stick with Budget or Cattman for y-pipes
#29
Got SR Headers and Y-pipe on
My stone racing headers and y-pipe are on. I haven't seen the car yet but my friend them them on today. I will post something after I drive the car and tell you how it is. I have no idea how he got the stone racing y-pipe on because I heard they don't line up. I will find out soon.
Thread
Thread Starter
Forum
Replies
Last Post
Violator
4th Generation Classifieds (1995-1999)
1
09-09-2015 10:14 AM