4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

weird stalling problems can anyone help

Thread Tools
 
Search this Thread
 
Old Apr 19, 2005 | 01:22 PM
  #1  
97MaximaSE's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 708
weird stalling problems can anyone help

Last week i was slowing down approaching a traffic light and the car just stalls and today i was slowing down to about 30mph and went to accelerate and it stalls again.....this time it was harder to start last time it started instantly. anything i should look for? car runs fine...only thing i can think of is maf since about 2 months ago i re oiled it. thanks in advance
Old Apr 19, 2005 | 03:57 PM
  #2  
lilonasis's Avatar
Supporting Maxima.org Member
 
Joined: Jan 2005
Posts: 104
Is your CEL on?
Old Apr 19, 2005 | 09:11 PM
  #3  
97MaximaSE's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 708
no cel just a once a week stalling problem.....seemed to have started after the weather warmed up here in CT
Old Apr 19, 2005 | 09:20 PM
  #4  
C3nthusiast's Avatar
Senior Member
iTrader: (3)
 
Joined: Jun 2002
Posts: 1,830
I had the same problem. I changed the plugs and it went away.
Old Apr 19, 2005 | 09:40 PM
  #5  
multiplexor's Avatar
Senior Member
 
Joined: Aug 2001
Posts: 1,503
hehe please see my thread probably still on the first page

Are you auto or manual? I'm assuming manual...

when it's stalling, try reving the engine to see if it goes back up, but with a feel of power loss... like something is blocking the exhaust...

what air filter are you useing?
what do you mean by you "oiled the maf"
Old Apr 19, 2005 | 09:47 PM
  #6  
97MaximaSE's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 708
im auto and i meant reoiled the k&n from my cai......my exaust was just redone about 2 months ago....the plugs should be good for another 50k or so since there were recently changed about a year ago but if i can get my hands on some i might try them
Old Apr 23, 2005 | 09:18 AM
  #7  
97MaximaSE's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 708
ok i finally threw a code for camshaft position sensor....replaced it and now the stalling in forward has gone away.....but now for some reason it does it in reverse. i just cleaned out everything today and threw a air intake temp sensor....checked the connection and it was good. would that sensor make the car stall in reverse? it hasnt come back yet so who knows. anyway if i put it in reverse and dont touch the gas its fine...once i hit the gas it almost feels like a misfire and it just stalls....any ideas would be appreciated
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AaronL
5th Generation Maxima (2000-2003)
15
Nov 15, 2020 11:52 AM
05RLS2
7th Generation Maxima (2009-2015)
5
Sep 27, 2015 09:24 PM
97_GXE
4th Generation Maxima (1995-1999)
5
Sep 15, 2015 06:47 AM
bennuss
5th Generation Maxima (2000-2003)
0
Sep 11, 2015 05:55 AM




All times are GMT -7. The time now is 05:02 AM.