I have no lift but need to get all fours off the ground.
I have no lift but need to get all fours off the ground.
I am going to paint my calipers with the G2 caliper paint system. After i mix the paint, i only have two hours for application of two coats and i was wondering if anyone had any ideas on how i could lift my max to get all four wheels up at the same time, without an actual car lift of course. thanks.
-TheFink
-TheFink
Guest
Posts: n/a
I did mine one at a time using the spare tire jack. Took me exactly 3 hours doing it this way. Used the caliper paint from Pepboys and coated 3 times each after each dry and put the wheel back on even before drying so I can work on the next wheel.
Buy yourself a decent jack and 4 jackstands and put the car up in the air. Easiest way and you will get a life of use out of those stands and jack for your further adventures with cars.
Just buy the proper equipment! It might save your life. Buy atleast a 2 1/2 ton floor jack (or else the wheel wont be high enough). Around $50 at Walmart.
You could use the factory lift if you really have too. Make sure the parking brake is up.
You could use the factory lift if you really have too. Make sure the parking brake is up.
Yea, I agree with Dave, I cheaped out and bought something like up to 17" for only $20, but now feel as though I need the next step (like the $50ones)...it just wasn't comfortable changing tranny fluid with the car that low...my best advice is don't cheap out, and get the right stuff the first time.
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
Jan 4, 2024 07:01 PM
mkaresh
8th Generation Maxima (2016-)
21
Mar 12, 2018 06:48 PM
Maximeltman
4th Generation Maxima (1995-1999)
2
Sep 28, 2015 07:19 PM





