4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

ECU codes, 1 Undefined other issues as well

Thread Tools
 
Search this Thread
 
Old 06-11-2005, 12:05 PM
  #1  
Junior Member
Thread Starter
 
95GLEPEARL's Avatar
 
Join Date: Apr 2005
Posts: 87
ECU codes, 1 Undefined other issues as well

So my car was running normal last night, the CEL came on while I was sitting in my car at home and I didn't check it until today. I was driving and the car runs horrible, it stutters when I try to accelerate, it lopes horrible while I'm stopped and when I go you can still feel the stutter.

Well ECU codes were, 5-3 Right Bank 02 sensor,
8-6 Evap canister purge valve/selnoid valve
6-4 Cyl. 5 Misfire,
7-6 Undefined

Anyone know what 7-6 really means? ANyone took theirs to a dealer or something? I checked the stickys but it skips from 7-5 to 7-7 with no mention of 7-6.

Oh and I was driving earlier today and the CEL was flashing, while I was driving, it wasn't doing any kind of pattern like a code it was just steady flashing. Whats that all about?
95GLEPEARL is offline  
Old 06-11-2005, 12:12 PM
  #2  
Member who somehow became The President of The SE-L Club
iTrader: (19)
 
njmaxseltd's Avatar
 
Join Date: Jun 2001
Posts: 16,033
0706 fuel injection system system lean or rich (right bank)

You might have a bad fuel injector in cylinder #5. Replace that and clear the codes and see what, if any come back.
njmaxseltd is offline  
Old 06-11-2005, 12:17 PM
  #3  
Junior Member
Thread Starter
 
95GLEPEARL's Avatar
 
Join Date: Apr 2005
Posts: 87
Hey thanks, SICK MAX!!!
95GLEPEARL is offline  
Old 06-11-2005, 07:08 PM
  #4  
Junior Member
Thread Starter
 
95GLEPEARL's Avatar
 
Join Date: Apr 2005
Posts: 87
Anyone have any idea why the CEL would just start flashing while I'm driving?
95GLEPEARL is offline  
Old 06-11-2005, 07:31 PM
  #5  
Do I get a tax break?
iTrader: (4)
 
njmodi's Avatar
 
Join Date: Jul 2001
Location: Elmhurst, IL
Posts: 5,441
Blinking CEL (as you saw) indicates a "severe" failure has been detected by the ECU - as in continuing to drive could cause damage to your engine. (if I remember correctly).
njmodi is offline  
Old 06-12-2005, 07:44 AM
  #6  
Senior Member
 
97MaximaSE's Avatar
 
Join Date: Aug 2000
Posts: 708
also a misfire issue causes a bllnking cel if im not mistaken....at least it was like that on my g/f's altima
97MaximaSE is offline  
Old 06-26-2005, 09:33 AM
  #7  
Newbie - Just Registered
 
mathius's Avatar
 
Join Date: May 2005
Posts: 8
On a related note, I just changed my spark plugs- NGK copper V-Power, torqued em properly, had no problems at all during the process. Now, my CEL is flashing randomly while I drive too. Checking the codes reveals nothing- just 5 long and 5 short, indicating no probs. What the hell? The car runs smooth, just as it did before I changed the plugs. (wasn't able to start a new thread).
mathius is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sctludwig
3rd Generation Maxima (1989-1994)
8
09-01-2022 01:32 PM
ballerchris510
3rd Generation Maxima (1989-1994)
9
09-10-2015 09:35 PM
dcam0326
5th Generation Maxima (2000-2003)
8
09-07-2015 07:26 AM
mix master
6th Generation Maxima (2004-2008)
0
09-04-2015 05:50 PM



Quick Reply: ECU codes, 1 Undefined other issues as well



All times are GMT -7. The time now is 11:15 AM.