from the previous owner iw as supposedly given these control modules for automatic up/down windows by simply using your remote keyless entry but i looks through the FAQs and havnet found anything on it. anyone installed this on their max?

do i just simply open up my door panels and plug these in? haha i have no f-ing clue.

for those who dont have a remote idea what im tlaking about, my 04 accord did this. you would press once to unlock the doors, then press unlock and hold it the 2nd time and the windows would automatically go down as long as you held the button down. then you could automatically put all the windows up just by using the key.

 

what kind of car do you have? the 4th gen maxes have an auto down feature built in when holding down the unlock button on the remote. i dont know of any modules that will just 'plug in' to the stock stuff for windows up. what kind of modules do you have?....brand name and model number please.

 

all 4thegns with keyless have this....i roll them down press and hold the unlock button. this will roll them down. To roll them back up press and hold the unlock button when window are all the way down and then press and hold trunk untill the windows go all the way back up. It is al in your owners manual.

 

 

Yea, and I'm George W. Bush.

 

im using viper keyless entry, its a 96 GXE

 

NAPhi_Shift, disregard manualmaxima..hes just pullin your chain. they do not go back up....again, model of your modules and alarm?

 

lol ty, viper 550ESP and the 4window roll up module is au-93-4 its by omega

 

damn...cant find the spec sheets but with the window module, you will have multiple wires...if this module only rolls 4 windows in one direction, you will have the power wires (+,-), a trigger wire (- input), and 4 sets of wires (total of 8), The power should be easy...now your trigger will be hooked into your alarm output when armed (- signal), and the 4 sets, well 1 set goes to each door. You usually splice the motor wire from the switch (the wire for the direction that you want) and then hook up the wires from the module to complete the circuit.

I unfortuantly cannot find any information on these products however I hope this information will provide you some direction.

 

@sshole! i ran my butt outside to try this! haha

 

Dont worry, it happens everytime the question is asked, I got caught trying it out in 02.

 

it never gets old. somebody always falls for it.

 

lol. . . someone fall for it everytime. its just gets funnier!

 

i fell for it a few weeks ago. lol

 

i kind of understand what you said lol

anyone find anything or have any useful information for me?

 

these are my favorite threads. especally when people do it form nside their house and have go out and close their trunk......HAHAHA

 

I actually left my office at work in 02 to try it out!

More to come. Always better when it happens to others!

 

all you have to do is wire the connector to reverse the polarity of the switch.

 

ROOFL i was about to go run outside and do it as well .. but im soo friggin tired from washing, clay bar'ing and waxing + ugent work shift.. that i decided to scroll down and read some more replies...

 

Damn, ended it too soon!

 

ah man i didn't want to ruin the fun ...

we can always repost this in a week.. or better yet tommorow.. newbs don't read previous topics anyway