4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

215-series tires on 300zx rims?

Thread Tools
 
Search this Thread
 
Old Sep 20, 2006 | 08:06 PM
  #1  
MaximA StyLeZ's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Jul 2004
Posts: 749
From: North, NJ
215-series tires on 300zx rims?

i want to know if i could run 215/55/16 tires on 300zx NA rims? I forget how wide they are, but just want to know because I have a set of these tires, and dont really feel like purchasing a new set. Thanks
Old Sep 20, 2006 | 10:43 PM
  #2  
Fr33way™'s Avatar
Wild for Width
iTrader: (23)
 
Joined: Jan 2005
Posts: 6,471
From: Atlanta
Wheel and tire section may be better for this.

Alot of those guys can spit ideal aspect ratios out in seconds.
Old Sep 21, 2006 | 06:34 AM
  #3  
MDeezy's Avatar
Senior Member
iTrader: (27)
 
Joined: Feb 2004
Posts: 33,701
From: Atlanta
wheels and tires section.


But I think 215 could fit, but might be pushing it. Why not go with atleast 225? you could fit 245's on there if you wanted.
Old Sep 21, 2006 | 07:25 AM
  #4  
packerZ's Avatar
Senior Member
iTrader: (7)
 
Joined: May 2005
Posts: 422
From: Western North Carolina
I am running 225/50X16 with 300ZX wheels on my (H&R lowered w/ RSB)96SE...LOVE IT! Aggressive cornering with NO rubbing/wear issues at all!!! Try it...You'll like it!
Old Sep 21, 2006 | 07:41 AM
  #5  
nismos14's Avatar
§č~® f®ČÄk
iTrader: (56)
 
Joined: Feb 2003
Posts: 17,505
From: NJ
The 215's would be fine temporarily. Might as well not put them on if you plan to stay at that tire size though.
Old Sep 21, 2006 | 08:33 AM
  #6  
MaximaSE96's Avatar
Maxima Owner
iTrader: (8)
 
Joined: Jun 2003
Posts: 5,036
lil too small....NA wheels are 7.5" wide....i would do 225 minimum
Old Sep 21, 2006 | 10:07 AM
  #7  
MaximA StyLeZ's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Jul 2004
Posts: 749
From: North, NJ
yah i figured they would be too small, just wanted to hear some opinions. Thanks, anyone else running z wheels w/ a drop and rsb ? I have 5 stars on, but will it handle alot better with the z rims? Are the Z rims direct swap?

My current suspenison:

-Eibach/Agx
-RSB
Old Sep 21, 2006 | 10:58 AM
  #8  
MDeezy's Avatar
Senior Member
iTrader: (27)
 
Joined: Feb 2004
Posts: 33,701
From: Atlanta
dont get me wrong 215 can fit.

For example if you got the toyo proxes 4 for the Z wheels. their 215 size tire can fit on wheels with a width from 6" - 7.5"
http://www.toyo.com/docs/tires/produ...category=sport

It depends on the type of setup you want. Most might want to try and get atleast 225 tires to have a wider stance for better handling and grip. If this doesnt apply to you and you can get a deal on the 215 then go ahead.


they are bolt ons. some needed spacers for the rears due to the offsett. another method would be to find two sets of front rims for your car.
Old Sep 21, 2006 | 11:31 AM
  #9  
MaximaSE96's Avatar
Maxima Owner
iTrader: (8)
 
Joined: Jun 2003
Posts: 5,036
Z rims are good...pretty light...i had them until i put my BBK they wont clear it...Deezy is right they will fit but they will be stretched....but again some tire manuf. suggedt different width fro their tires
Old Sep 21, 2006 | 02:30 PM
  #10  
MorpheusZero's Avatar
Senior Member
iTrader: (10)
 
Joined: Nov 2004
Posts: 9,064
From: Santa Barbara, CA
215/55s should be fine. 225/50 is stock for Z32s, and 215/55 is stock for an SE. You're talking about a taller sidewall and only 10mm narrower section width. They might be a tiny bit stretched but nothing unsafe.

NA Z rims are 16*7.5, as stated previously.

I'm running TT Z32 rims with a drop (Progress + Koni yellows). They're a direct fit and I haven't experienced any rubbing. You won't notice a difference between stock SE rims and Z rims if you put the same tires on 'em.
Old Sep 21, 2006 | 07:01 PM
  #11  
MaximA StyLeZ's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Jul 2004
Posts: 749
From: North, NJ
so to make sure, the NA rims will fit w/o any spacers? im dropped on eibachs.
Old Sep 21, 2006 | 07:28 PM
  #12  
MaximaSE96's Avatar
Maxima Owner
iTrader: (8)
 
Joined: Jun 2003
Posts: 5,036
yes as long as u have stock brakes
Old Sep 21, 2006 | 07:54 PM
  #13  
MaximA StyLeZ's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Jul 2004
Posts: 749
From: North, NJ
yah im on stock brakes, i actually wanna upgrade to q45 calipers and z rotors
Old Sep 22, 2006 | 12:18 AM
  #14  
MorpheusZero's Avatar
Senior Member
iTrader: (10)
 
Joined: Nov 2004
Posts: 9,064
From: Santa Barbara, CA
They will fit without spacers.
Old Sep 22, 2006 | 06:07 AM
  #15  
babymac's Avatar
BOOST 4 LIFE!
iTrader: (20)
 
Joined: Feb 2006
Posts: 1,885
Here you go about size and diameter
http://www.scirocco.org/tires/
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
aw11power
Supercharged/Turbocharged
161
Oct 10, 2021 04:57 AM
BPuff57
Advanced Suspension, Chassis, and Braking
33
Apr 16, 2020 05:15 AM
coolsun
Wheels/Tires
6
Nov 13, 2016 05:01 PM
Fbana41
Maximas for Sale / Wanted
3
Aug 29, 2016 12:18 PM




All times are GMT -7. The time now is 08:28 AM.