WTH, where were these when I was doing my retrofit. I might buy a pair to play with, once I see the fitment on these. Nice to see some headlamp options for the 4th gens. But these > Cefiros so far.

 

if that center piece does indeed connect to the back of the reflector and they fit decently, I'll pick up a pair.

 

finally i can do an s2k fx dual projector swap..

 

TL/TSX combo...

 

According to this guy these are a direct bolt on with no modification needed.

http://cgi.ebay.com/ebaymotors/95-99...45690470QQrdZ1

I really want to see the beam pattern on these.

 

damn . . . they look pretty nice to me. AE mod would only add to the niceness.

 

Im feeling the ae's over the all chrome ones..but im still skeptical til I see them on a max.

 

that center peice def goes all the way through.. its the mirrored reflection thats reflecting the insert behind the sheild...not through to the other side...

painted i think these will look pretty damn sick.... just shove hids in there **** PROJECTors.. too much of a PROJECT lol even tho they look sick..
there will probly be 1/2 as less glare as the oem headlights maybe more if you just threw hids in them.. theyre smaller and the areas are more condensed, hence not expanding the light..

 

I like how that photoshop one looks in the above post. I'd probably pick up a pair if they came out. I just don't know if they would look good on my dark green max.

 

well, the R34 uses HID's but with a different reflector and bulb. so..

 

think we can get a pic of the back? i have a feeling these will be the same as cefiro lights.

 

Likely with D1R capsules (yes, D1, not D2, consider when they were made) and some sort of extra glare guard. Your average kit is going to use S capsules, though, not R's, and no one will be unlazy enough to use a glare guard, sooo hello glare.

Also, lol @ whoever said there won't be that much glare because the reflector is smaller

 

The glare will be just as bad, I bet. With no shield to cover the bottom of the bulb...hello glare.

What i'm excited to hear is that you wont have to cut the "bracket" that holds the corner lamps...If these headlamps are truly plug n play.

 

They are available again.

http://motors.search.ebay.com/search...trypage=search

 

the "plug and play" is what worries me. If you look close, you still can't see what kind of bulb the inner one is. How lame would it be if it was just a 194 or something.

On a side note, making a small harness for each side would be pretty easy. Use the same ground for each bulb, and run the low beam wire to one side, then the high beam wire to the other side. It would work the same way. But what types of bulbs would you use?

 

That'd be pretty hilarious.

What's the common high beam bulb nowadays? H1?

 

somehting tells me these are going to be a disaster...but prove me wrong

 

i second that.. how do they bolt to the frame if there is no way to remove the corner lights and get to those 2 bolts on the right

 

can anyone photoshop the ae'd ones on a black 97-99? totally jdm yo.

 

There other lights turned out to be a nice fit and beam pattern, so who knows???

 

GUYS !!!!!!

THE BLACK ONES ARE OUT !

http://cgi.ebay.com/ebaymotors/95-99...QQcmdZViewItem

I cant seem to find any active auctions tho... I'm sure they'll be up in a bit.

 

wow, those look really nice

 

I hope you aren't planning on running both at the same time. That would too much light for oncoming traffic.

 

hmmm........
in too see how these would look installed. the aftermarket is exploding for these beaters now.

 

touche'!

 

i know, but thats the beauty of projectors the light stay on the ground not all over the place..

 

FAAAAAAAAAAAAAAAAAAAAAAAWK!

Oh well. Only a little more work to black my chrome ones out.

 

doncha hate when that happens lol.....cant wait, im dying to scribble the black ones into spot one of santas list.

 

Damn, those are slick...

 

waiting to see how they fit before I put them on the list of stuff the fat guy in red needs to bring me.

 

Oh god, that $200 dollars is walking out of my pocket as we speak.

 

as soon as I get the funds, I am purchasing these. I'll be the ginea pig. Give me one more pay check.

 

But ewuzh already has a pair on the way, so you won't have to

Even with my current bi-xenon setup in AE'd 97+ headlights, I would sell them in a heartbeat to potentially try a setup like this with only low beam HID projectors or something in the normal low beam spot. It just looks so cool and so "modern" compared to what we have now.

Also, having done some research, those high beams appear to be 9005 bulbs, which are common to use as high beams in modern cars with separate high beam reflectors. They are not H1, as the bulb is too short, and they are not 9006 because they have no film on the top of the bulb. They wouldn't be 9004/9007/H4/H7 because that's dual filament, they wouldn't be H3 because the bulb is too long and narrow, and the bulbs look nothing like a little 194 or anything like that.

 

I have to agree 100% if they fit i might just sell mine and get those...........nah I rather buy performance stuff. They are hot as hell though.

 

damn beaten to it. I would love to try a retrofit in these. They look perfect for a dual retrofit setup.

 

what's a good price for a set

 

uhggg the waiting is killing me!

i want to see how it looks like on the max! esp the blacked out ones.

i'm subscribed

 

it looks like one is an h7 bulb probaly for the high beam and then a 9005 for the regular driving lights and possibly the one on the side as corner light or ablinker like the cefiros

 

we're on the same boat, I don't care how hard they are to fit, I tear up everything else on my car(for the better of course)

 

man, if i didnt do cefiros already id be on those black ones, they look sick. dam...........i want to see pics on a maxima......