SC99MaxSELmtd

I have a Stillen Y-pipe, RT cat, Stillen B-pipe and Stillen muffler. There is pretty bad bees at high revs, but only until the car warms up awhile. I was wanting to get some header wrap to help aleviate the problem, but I can't find where to get or what size dimensions I would need to get. Also, what all should I cover? Just the flex? I appreciate any help, since I could not find any answers doing a search.

mtrai760

iTrader: (19)

www.summitracing.com search for header wrap. It's about $34.99 I think, comes in like 24 ft. or something. Use some metal hose clamps to secure it, the tie ties don't work. good luck.

WizzaMax

iTrader: (9)

If you need advice on the wrap...I used a two foot section one layer deep in the middle of the flex section and a four foot section cross-wrapped overlapping the ends of the flex section and fastened with 2 and 3/4 inch hose clamps. I got mine at a local speed shop for about $1.50 a foot...let me know if you want me to hook you up with some and send it your way at cost...you dont really need more than 10 feet at most...let alone 28 or 50.

jgadlage

iTrader: (1)

Could you hook me up with some header wrap? Email me and let me know the details