BLacKMax69

i just ordered The Greddy cat-back exhaust , RT cat conv, and the JWT intake... i how many more horses will i get and i have a 95 auto...with these mods how fast should i run a 1/4 and do u think i can take a 2000 honda accord v6 coupe with just intake????

NYCe MaXiMa

iTrader: (9)

I am not sure, exhaust will give ya a good 10 hp at the flywheel? (someone please correct me). Popcharger is questionable, but likely a good 3-5 hp.. RT cat = 5 hp or so..
Biggest bang for the buck N/A mods are a CAI and a Y-pipe.. combination of the two should give ya 25 hp or so. About the 1/4 run, I'd guess mid 15 to high 15s. Depends on reaction time and other factors too...

NickStam

iTrader: (3)

intake = 1-2
rt cat = 1-2
catback = 3-5

total= 5-9 hp. maybe more since these are used together.

Sonic

The restiction in our I/E is the Y, and pretty much only the Y. Like Nick said, look for small gains.

Tai Mai Shu

what are you doing getting "reall performance" go out and get you some NISMO stickers, and catman, that will be good for 20-40HP DUH! then you will relly be able to whomp him

um, yeah, i think you can beat the V-6 honda, beacuse they only have 200hp, and no touqe "honda's=touqless wonders" due to V-tec, but lucky for you MAxima's are chalk full of tourqe. hope this helps.

MaxC1Get!

Just curious. Doesn't the V6 Accord have 195 lbs. ft of torque? That is the only Honda engine besides some Acura engines that has descent torque numbers.

emax02

iTrader: (1)

The RT cat's affect of performance will greatly depend on how old/clogged the oem one is so 1-2 HP is not very accurate in my mind. To date I have only seen one dyno chart from before and after a RT and it showed over 7 HP at the weels.
Also a intake gives more like 3-5 from the dyno's I have seen

I say any where from 10-15 HP. Dyno and find out!



As for V6 accords they are rated at 0-60 = 7.8 so a "stock" auto max should be neck and neck with one.

emax02

iTrader: (1)

.