4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

IACV and TB

Thread Tools
 
Search this Thread
 
Old Feb 17, 2009 | 07:50 AM
  #1  
hotimportnight9's Avatar
Thread Starter
Member
 
Joined: Sep 2006
Posts: 109
From: Bridgeport CT
IACV and TB

i just cleaned my IACV and TB and replace the gaskets on both now when i drive n shift into neutral the rpm needle drop stops at about 1200 rpm then goes down the video should say it all it did not do that before i clean it out and i tripple check everything even took it appart when i swap my cylinder 3 fuel injector and i still does it. any ideas?

http://s287.photobucket.com/albums/l...t=CLIP0002.flv

http://s287.photobucket.com/albums/l...t=CLIP0004.flv
Old Feb 17, 2009 | 08:00 AM
  #2  
HBOR's Avatar
Junior Member
 
Joined: Feb 2009
Posts: 18
From: Mansfield, OH
It seems Normal to me, Does it shut off?
Old Feb 17, 2009 | 08:26 AM
  #3  
hotimportnight9's Avatar
Thread Starter
Member
 
Joined: Sep 2006
Posts: 109
From: Bridgeport CT
so far no
Old Feb 17, 2009 | 08:38 AM
  #4  
HBOR's Avatar
Junior Member
 
Joined: Feb 2009
Posts: 18
From: Mansfield, OH
I have had 2 manual and the always drop to about 750-800, Your seems normal.
Old Feb 17, 2009 | 11:58 AM
  #5  
hotimportnight9's Avatar
Thread Starter
Member
 
Joined: Sep 2006
Posts: 109
From: Bridgeport CT
ok kool a second opinion never hurts
Old Feb 17, 2009 | 12:55 PM
  #6  
sicivic89's Avatar
Senior Member
iTrader: (58)
 
Joined: Sep 2003
Posts: 870
From: Acworth, GA
Yeah, seems normal to me. Your car an auto or manual?
Old Feb 17, 2009 | 04:31 PM
  #7  
NISSANMAXIMA91's Avatar
Member
iTrader: (1)
 
Joined: Jan 2008
Posts: 271
From: The Burgh, IN
Looks fine to me as well. My Toyota pickup does that as well.
Old Feb 17, 2009 | 08:59 PM
  #8  
Snypa's Avatar
Senior Member
iTrader: (35)
 
Joined: May 2007
Posts: 7,389
From: I-75 4th_Laud
normal.
Old Feb 20, 2009 | 07:56 AM
  #9  
hotimportnight9's Avatar
Thread Starter
Member
 
Joined: Sep 2006
Posts: 109
From: Bridgeport CT
good thanx for all of u guys opinions
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
schmellyfart
All Motor
7
Sep 25, 2015 04:47 PM
junito1
Audio and Electronics
3
Sep 23, 2015 12:14 PM
bumpypickle
4th Generation Maxima (1995-1999)
10
Sep 20, 2015 08:22 AM
Jamie Bowen
5th Generation Maxima (2000-2003)
2
Sep 6, 2015 09:59 PM
nbstriker10
5th Generation Maxima (2000-2003)
5
Sep 4, 2015 04:26 PM




All times are GMT -7. The time now is 12:14 AM.