Dirt cheap fix needed!! - Lower control arms / bad alignment / etc.
#1
Dirt cheap fix needed!! - Lower control arms / bad alignment / etc.
See my older thread for some background info if necessary:
http://forums.maxima.org/4th-generat...-possible.html
Basically, I have a 95 Maxima that is too risky to put much money into.
Oh yeah...thanks!
http://forums.maxima.org/4th-generat...-possible.html
Basically, I have a 95 Maxima that is too risky to put much money into.
The problems:
-pulls to the right pretty bad
-bad suspension all around (LCAs, bushings, ball joints, etc.
The question:
Is there some ghetto/cheap thing I can do / replace for $150 or less that will give me a decent enough suspension and alignment to get me through another 6-12 months of driving?
I can drive it "ok" now, but if I can fix it up a little more to where it doesn't pull hard to the right or clunk a lot on pits/potholes that would help. I am at 276k miles right now.-pulls to the right pretty bad
-bad suspension all around (LCAs, bushings, ball joints, etc.
The question:
Is there some ghetto/cheap thing I can do / replace for $150 or less that will give me a decent enough suspension and alignment to get me through another 6-12 months of driving?
Oh yeah...thanks!
#3
Pretty good quality Control arms w/ bushings:
http://internetautomart.com/
Tie Rods: go to any auto parts store and cheap out.
Thats all you can do, not much of a work around for these parts.
http://internetautomart.com/
Tie Rods: go to any auto parts store and cheap out.
Thats all you can do, not much of a work around for these parts.
Thread
Thread Starter
Forum
Replies
Last Post
TonyJr
3rd Generation Maxima (1989-1994)
4
08-20-2015 12:14 AM
soon2ownmax
6th Generation Maxima (2004-2008)
0
08-13-2015 02:19 PM
laparka66
7th Generation Maxima (2009-2015)
16
08-06-2015 09:36 AM