p1320 Ignition signal circuit HELP!? '95 Maxipad
09-11-2009, 03:35 PM
#1
Member
Thread Starter
Join Date: Jul 2009
Posts: 83
p1320 Ignition signal circuit HELP!? '95 Maxipad
Ignition signal circuit (ign-signal primary)
the ignition signal in the primary circuit is not entered to ecm during engine cranking or running
seem like if i unplug my middle cylinder not much happens, compared to the outside rear cylinders, i swapped out the coils and they work well in the outside of the engine
That's what I got so far Any further instruction or suggestions will be appreciated, it IS possible this problem happend after a low battery jump
the ignition signal in the primary circuit is not entered to ecm during engine cranking or running
seem like if i unplug my middle cylinder not much happens, compared to the outside rear cylinders, i swapped out the coils and they work well in the outside of the engine
That's what I got so far Any further instruction or suggestions will be appreciated, it IS possible this problem happend after a low battery jump
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
10-02-2022 02:13 PM
AaronL
5th Generation Maxima (2000-2003)
15
08-08-2020 10:31 AM
