4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

New Parts a comin

Thread Tools
 
Search this Thread
 
Old Jun 25, 2010 | 02:08 PM
  #81  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Originally Posted by NismoVQdet?
Car looks good man!! The red and clear look good only if you smoke then a little to get rid of that bright chrome. That's what I did but probably would have been better if I took them apart and smoked just the chrome on the inside. Either way better then the orange for 80 bucks
Yup, I'd probably just get some tinting film and put it over the entire light.
Old Jun 25, 2010 | 02:23 PM
  #82  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
If your going to get the ebay ones, at least tint them a bit.

I ordered some David L's from Chrisman for my pearl white, I will take pics when I get them.
Old Jun 25, 2010 | 02:41 PM
  #83  
ProW649's Avatar
Senior Member
iTrader: (7)
 
Joined: Apr 2009
Posts: 773
From: Pembroke P!nes, FL
Originally Posted by 95Maxed
Huh? The housing is amber too on my car, ive got oem lights right now.
I meant i found a pair of ebay lights i wanted to buy lol

lol oooooh....gotcha thought you were talking about the tails.
Old Jun 25, 2010 | 03:24 PM
  #84  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Originally Posted by bkortee
If your going to get the ebay ones, at least tint them a bit.

I ordered some David L's from Chrisman for my pearl white, I will take pics when I get them.
Nice.

Originally Posted by ProW649
lol oooooh....gotcha thought you were talking about the tails.
Nope lol
Old Jul 2, 2010 | 06:17 PM
  #85  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Bump... Back from vacation, got my Fog/Day Running lights and my 4DSC stickers.

The fogs are placed in a place I'm not sure anyones put em before. They still have to be wired... Im stuck ahah, might just have the shop do them when i take it in to get the egr cleaned.

Pics:



Old Jul 2, 2010 | 06:22 PM
  #86  
delacruz_17's Avatar
Member
iTrader: (1)
 
Joined: Mar 2003
Posts: 261
From: Houston
Originally Posted by 95Maxed
Bump... Back from vacation, got my Fog/Day Running lights and my 4DSC stickers.

The fogs are placed in a place I'm not sure anyones put em before. They still have to be wired... Im stuck ahah, might just have the shop do them when i take it in to get the egr cleaned.

Pics:



ooo shinny
Old Jul 2, 2010 | 06:36 PM
  #87  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Originally Posted by delacruz_17
ooo shinny
Thanks, I try my hardest lol
Old Jul 3, 2010 | 06:27 PM
  #88  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Updated.

Fogs are in place, i had my sister hold the ends to the battery just to test them for this (very shaky) photo. Enjoy.

Old Jul 3, 2010 | 06:47 PM
  #89  
SiathLinux's Avatar
Senior Member
 
Joined: Feb 2010
Posts: 685
From: Altamonte Springs, FL
I like it... they tuck under nicely.
Old Jul 3, 2010 | 06:51 PM
  #90  
shadyonedeath's Avatar
Senior Member
iTrader: (10)
 
Joined: Jul 2006
Posts: 2,065
From: Los Angeles, CA
clean car.
Old Jul 3, 2010 | 06:58 PM
  #91  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Originally Posted by SiathLinux
I like it... they tuck under nicely.
Thanks, it took some work to get em in there lol

Originally Posted by shadyonedeath
clean car.
Thanks, I try to keep it lookin good!
Old Jul 6, 2010 | 07:03 PM
  #92  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
More pics of the fogs. Better pics lol.





Old Jul 6, 2010 | 07:26 PM
  #93  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
nice, I will have some pics up of my engine bay with cai and strut bar soon.
Old Jul 6, 2010 | 08:18 PM
  #94  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
I want a cold air lol
Old Jul 7, 2010 | 07:29 AM
  #95  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
Originally Posted by 95Maxed
I want a cold air lol
http://cgi.ebay.com/ebaymotors/BOMZ-...Q5fAccessories

Honestly for $50, I think it is the best performance upgrade. Easy install as well. Just make sure you drill into the fender bc that is where you will see hp gains.
Old Jul 7, 2010 | 08:44 AM
  #96  
Doomi30's Avatar
Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 90
From: New Bedford, MA
Originally Posted by bkortee
http://cgi.ebay.com/ebaymotors/BOMZ-...Q5fAccessories

Honestly for $50, I think it is the best performance upgrade. Easy install as well. Just make sure you drill into the fender bc that is where you will see hp gains.
not only for the hp gains, it makes your car sound like a beast! haha
Old Jul 7, 2010 | 06:50 PM
  #97  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
pics as promised:

David L's


strut bar and cai


close up
Old Jul 7, 2010 | 07:01 PM
  #98  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Im jealous. One question tho, with the intake, why does it still have that restrictive rubber/plastic ribbed link to the TB?
Old Jul 7, 2010 | 07:11 PM
  #99  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
Originally Posted by 95Maxed
Im jealous. One question tho, with the intake, why does it still have that restrictive rubber/plastic ribbed link to the TB?
B/c I have to order an extended coupler. The one they gave me was too short. I wanted my filter lower in order to get colder air in the fender.
Old Jul 7, 2010 | 07:14 PM
  #100  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Gottcha. How long did it take to install?
Old Jul 7, 2010 | 07:19 PM
  #101  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
Originally Posted by 95Maxed
Gottcha. How long did it take to install?
Well I had to wait a day to get a hole saw. But all in all, I would say about 2 hours. If your really handy, you could do it quicker. I cleaned my tb during that time as well.
Old Jul 7, 2010 | 07:23 PM
  #102  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Dude, im honestly gonna buy the ebay one end of July... I blame you for being my inspiration haha. Hows it sound? Power increase? And you think the ribbed cuppling reduces any power?
Old Jul 7, 2010 | 07:32 PM
  #103  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
Originally Posted by 95Maxed
Dude, im honestly gonna buy the ebay one end of July... I blame you for being my inspiration haha. Hows it sound? Power increase? And you think the ribbed cuppling reduces any power?

I wouldnt know about the ribbed coupler until I replace it. It sounds great. It growls like a v8 in the higher rpm ranges but sounds normal at lower ends. I noticed a big power increase at both the lows and highs. However, if you dont drill into fender, you wont see an increase. Also, replace the filter with a k&n once you get it. I have yet to do so but I heard it makes a big change as well. For $50, its the best upgrade you can get.
Old Jul 7, 2010 | 07:38 PM
  #104  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
That filters gonna be a b***h to replace now haha. And Ill for sure drill the hole, 4 inches? 3? And your talking like fender meaning tire well in front of the tire, yea?
Old Jul 7, 2010 | 07:46 PM
  #105  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
Originally Posted by 95Maxed
That filters gonna be a b***h to replace now haha. And Ill for sure drill the hole, 4 inches? 3? And your talking like fender meaning tire well in front of the tire, yea?
I drilled a 3 1/2 inch hole in diameter. It doesnt have to be exact. Just bigger than 3". You drill in the area between the battery tray and the relay box.



right where the small circle is.
Old Jul 7, 2010 | 07:52 PM
  #106  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Wait, Would that not cut straight through to the exterior? so youve got a 3 inch hole for everyone to see? Im confused lol
Old Jul 7, 2010 | 08:11 PM
  #107  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
Originally Posted by 95Maxed
Wait, Would that not cut straight through to the exterior? so youve got a 3 inch hole for everyone to see? Im confused lol
unscrew your bumper lights and you will see the area where it sits. Or take off the plastic underneath your bumper and you can see the area too. It is not visible at all.
Old Jul 7, 2010 | 08:41 PM
  #108  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Gottcha, see i think its the injen cia, you cut a hole in the front of your wheel well and the air gets in through there.

Last edited by 95Maxed; Jul 7, 2010 at 08:52 PM.
Old Jul 7, 2010 | 08:56 PM
  #109  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
Originally Posted by 95Maxed
Gottcha, see i think its the injen cia, you cut a hole in the front of your wheel well and the air gets in through there.
it is in front of the wheel well. You just dont cut INTO the wheel well. Its right in front of it. Once you buy it and scope it out, it will be pretty clear.
Old Jul 7, 2010 | 09:09 PM
  #110  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
btw, buy these: http://cgi.ebay.com/ebaymotors/95-99...Q5fAccessories

Last edited by bkortee; Jul 7, 2010 at 09:16 PM.
Old Jul 7, 2010 | 09:13 PM
  #111  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Got it. Im sure ill have more questions once i buy it lol. Btw, can you do a MAF delete? I swore i saw someone do it on here one day. One of the bolts connecting my maf to my airbox is stripped....
Old Jul 7, 2010 | 09:15 PM
  #112  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
I was thinking blacked out bumpers, but i like the clear look more i think
Old Jul 7, 2010 | 09:17 PM
  #113  
bkortee's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 284
From: Cincinnati
Originally Posted by 95Maxed
I was thinking blacked out bumpers, but i like the clear look more i think
it depends what you plan on doing. Clear bumpers means red/clear tails, silver rims, etc. Black bumpers means blacked out tails, black rims, etc. Depends what "look" your going for.
Old Jul 7, 2010 | 09:21 PM
  #114  
95Maxed's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 1,393
From: Denver, CO
Since im not dropped now, and have some decent 6 spokes that are grey silver ish, i think clears, maybe with the orange/yellow square on the lens.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hez8813
5th Generation Maxima (2000-2003)
11
Mar 12, 2020 12:06 AM
t6378tp
4th Generation Classifieds (1995-1999)
11
Sep 29, 2018 04:27 PM
SpeedCrazie
5th Generation Classifieds (2000-2003)
13
Sep 16, 2016 03:41 PM
Lowered_a33
5th Generation Maxima (2000-2003)
1
Sep 10, 2015 09:41 PM
videomano
Maximas for Sale / Wanted
0
Sep 8, 2015 03:28 PM




All times are GMT -7. The time now is 06:29 AM.