Maximum_Chaos_95

so i went to change my spark plugs cause my car was acting funny and they needed to be changed any ways and i find motor oil at the bottom of the plugs, what does this mean ?

tigersharkdude

iTrader: (20)

It means to SEARCH. You really should look before asking questions. Seeing how there is another thread on this same topic on page 1, that means you didnt even look for the answer to your question. http://forums.maxima.org/4th-generat...plug-hole.html
















Its a spark plug tube seal, it needs to be replaced

Maximum_Chaos_95

thanks. sorry ima noob havent been on in a while.

asand1

iTrader: (1)

Valve cover gaskets with tube seals and grommets.
Get FEL-PRO Part # VS50494R

Here;
http://www.rockauto.com/catalog/raframecatalog.php

And before you ask, there are write ups, how toos, and many quick posts asking advise.

Search these forums for tube seals, valve cover(VC) gaskets, and upper intake manifold(UIM) removal.

Xfactor22

iTrader: (13)

Good link!

asand1

iTrader: (1)

Hot oil will also break down the rubber coil boots and cause misfires. Inspect yours carefully and replace if needed(Also available at rockauto). look for COP coil boots.
Did you replace plugs with NGK??

ChrisMan287

iTrader: (34)

Resize your sig before changing your spark plugs

tigersharkdude

iTrader: (20)

resize your sig...... sig limit used to be 600L x 200T

ChrisMan287

iTrader: (34)

Mine is fine. It's to seperate pics, Brad