1HOTMAX

iTrader: (1)

so it took me like 4 hrs to make it perfect plug and play! went to autozone to get a harness adaptor, electric tape, and a volt meter. I found this to be the best way because a lot of kits out there you will need to take apart fast in order to pass inspection. ust the volt meter to tap from the oem harness to find the power low/highbeam power/ then you know the last one is the ground. you are set, go to autozone and buy a 9004 harness adapter and connect the red/orange wire to the positive low, then the black to ground. then make everything look pretty. i made it look so snug that you won't know i have hid's on my car. now it's so clean. i finished it with loom (black to make it look pretty and made chrome covers for the ballast and starter.
it compares to my brother's 95 supra's piaa hid conversion kit. he also has projectors so the light is further in distance. my kit only goes like 2 blocks in distance. i ordered the piaa ion crystal to replace the h3 cause i tried to put hid's into the oem fog but the bulb is too long. and there is no safe place to place the ballast.
i think this kit is worth the money. my 2 cents. have fun playing with hid's, i do love them and will never ever use oem again.

maximus75

iTrader: (5)

I put HIDs in my fogs but it was a pain in the a**! The best part is when you first turn them on and there BLUE !!