Maxima Forums
Page 2 of 2
1
2
Show 50 post(s) from this thread on one page

Maxima Forums (https://maxima.org/forums/)
-   4th Generation Maxima (1995-1999) (https://maxima.org/forums/4th-generation-maxima-1995-1999-6/)
-   -   Bank 1 Sensor 2 - will this fit (https://maxima.org/forums/4th-generation-maxima-1995-1999/647492-bank-1-sensor-2-will-fit.html)

Tony Cervantes 08-05-2019 04:52 AM
Bank 1 sensor 2 97 nissan maxima fed emmision where is of location
 
I have code p0141 oxygen sensor . 97 nissan maxima i have a fed emmision .so where is of location . Thanks for help

Tony Cervantes 08-05-2019 05:00 AM
Originally Posted by bobflood (Post 8416428)
you're close - sensor 2 is always "post" (after) cat. Fed spec cars have one post cat sensor, identified as bank1 sensor 2; cali specs have two post cat sensors. In our maximas, bank 1 is the cylinder bank at the rear of the engine compartment; bank 2 is at the front of the engine compartment.
so i have a code p0141 say bank 1 sensor 2 i have a fed specs so is aftercat or before ,? And is upstream or downstream can help me guys thanks

Tony Cervantes 08-05-2019 05:27 AM
Originally Posted by 2brosgixxer (Post 8416261)
ok, mike, you need to change the downstream one right? Iirc bank 1 sensor 2 is downstream. This would be the one by the cat. Here is a link for down stream... 4 wires http://www.ebay.com/itm/new-direct-f...76df41&vxp=mtr

upstream has 3 wires and those 2 i believe are interchangeable with each other.
so of bank 1 sensor 2 is aftercat ? On fed specs???

Tony Cervantes 08-05-2019 06:17 AM
Bank 1 sensor 2 97 nissan maxima fed emmision where is of location
 
I have a 97 nissan maxima gxe fed specs somebody help me whre is of location bank 1 sensor 2 . And if is upstream or downstream . Thanks

KP11520 08-05-2019 09:11 AM
Originally Posted by Tony Cervantes (Post 9207005)
I have a 97 nissan maxima gxe fed specs somebody help me whre is of location bank 1 sensor 2 . And if is upstream or downstream . Thanks
It's by your rear Cat, after the Y-Pipe and Rear Cat. (just after) The model number you need is NTK 24630. The two front (Upstream) ones part number is NTK 24525. You have a total of three. Here's the rear:
I'd probably replace all three. Certainly cheap enough when you shop for best delivered price.via Google.

Took me 5 minutes to find this, including the info of the configuration for a Fed 97. Maybe that's why you posted 5 times with zero results. If you can't research HERE, why would anyone think you can handle this. So why bother. No info on your profile either. Typical.

NTK are the manufacturers of what your car was delivered with.

Tony Cervantes 09-24-2020 11:35 AM
Originally Posted by bobflood (Post 8416428)
you're close - sensor 2 is always "post" (after) cat. Fed spec cars have one post cat sensor, identified as bank1 sensor 2; cali specs have two post cat sensors. In our maximas, bank 1 is the cylinder bank at the rear of the engine compartment; bank 2 is at the front of the engine compartment.
my car is 97 maxima is federal spec how many oxygen sensor have and you have pic to see whre is of location..thanks


All times are GMT -7. The time now is 10:56 AM.
Page 2 of 2
1
2
Show 50 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands