Finished RWD conversion
#1
Finished RWD conversion
hey everyone,
i'm finally finished with the FWD-->RWD conversion...it took 3 guys and about a day and a half...we really didn't have directions to go by but we got it done using a chilton's manual and common sense...
and let me tell you...its totally sweet...i have all the notes of the FWD-->RWD conversion and i'll have total directions ready soon along with some basic install pics...
my friend video'ed me doing donuts like a freaking '70 camaro...i swear i'm gonna need new tires in like 2 days...i'll post the video asap...just thought i'd let you guys know
adrian
i'm finally finished with the FWD-->RWD conversion...it took 3 guys and about a day and a half...we really didn't have directions to go by but we got it done using a chilton's manual and common sense...
and let me tell you...its totally sweet...i have all the notes of the FWD-->RWD conversion and i'll have total directions ready soon along with some basic install pics...
my friend video'ed me doing donuts like a freaking '70 camaro...i swear i'm gonna need new tires in like 2 days...i'll post the video asap...just thought i'd let you guys know
adrian
#5
Originally posted by stino4life
yo thats sweeeeeet
i wanna see those videos
how much did the whole project cost
yo thats sweeeeeet
i wanna see those videos
how much did the whole project cost
#6
Donating Maxima.org Member
iTrader: (1)
Join Date: Nov 2000
Location: Worcester County, MA
Posts: 1,111
What engine and transmission did you use? How did you mount it into your engine bay? Did you have to cut in through the floor to make a channel for the driveshaft to the rear end? Just doesn't seem like a 700 dollar project, nevermind a 3 day project.
#7
Originally posted by BlkStnValyMaxima
What engine and transmission did you use? How did you mount it into your engine bay? Did you have to cut in through the floor to make a channel for the driveshaft to the rear end? Just doesn't seem like a 700 dollar project, nevermind a 3 day project.
What engine and transmission did you use? How did you mount it into your engine bay? Did you have to cut in through the floor to make a channel for the driveshaft to the rear end? Just doesn't seem like a 700 dollar project, nevermind a 3 day project.
#8
#9
ya this deffenantly seems stupid a rearwheel drive conversion for only 7-800 bucks i highly doubt that
#10
Originally posted by stino4life
ya this deffenantly seems stupid a rearwheel drive conversion for only 7-800 bucks i highly doubt that
ya this deffenantly seems stupid a rearwheel drive conversion for only 7-800 bucks i highly doubt that
clee, don't you feel somewhat responsible for this?
#11
Originally posted by dko
recently it has become extremely fashionable to create ridiculous threads and post thinly-veiled satirical comments in response to stupid questions. this is one of those threads. thought you might like to know.
recently it has become extremely fashionable to create ridiculous threads and post thinly-veiled satirical comments in response to stupid questions. this is one of those threads. thought you might like to know.
But either way it still was funny
#13
Originally posted by bags533
I thought it was from members being mean to people who post new ideas or "thoughts" of new mods.
But either way it still was funny
I thought it was from members being mean to people who post new ideas or "thoughts" of new mods.
But either way it still was funny
this thread has gone to ****. I think this is gonna be one of the last replies...
#16
Me? Responsible? For this? No way.
I would show you a pic of my real RWD conversion ... but my website is down.
I would show you a pic of my real RWD conversion ... but my website is down.
#17
Originally posted by clee130
Me? Responsible? For this? No way.
I would show you a pic of my real RWD conversion ... but my website is down.
Me? Responsible? For this? No way.
I would show you a pic of my real RWD conversion ... but my website is down.
i have seen it.. i have pics..
but my site it down too...
#18
I am relly tryin to refrain from voicing my opinion,
,at least until the thread starter posts again. And reveals his identity..................
#20
Ok the geometry of the maxima is set up so good the way it is right now. So if you tried to make it rear wheel drive you would just be waisting your time money and your maxima. You would have to be an automotive engineer to do this project right. Now I know this was a joke and I shouldn't get worked up about it, but if you want a rear wheel drive 4 door nissan. Go get a J30, it's basically a four door 300zx
#21
Originally posted by MaximaGTR311
Ok the geometry of the maxima is set up so good the way it is right now. So if you tried to make it rear wheel drive you would just be waisting your time money and your maxima. You would have to be an automotive engineer to do this project right. Now I know this was a joke and I shouldn't get worked up about it, but if you want a rear wheel drive 4 door nissan. Go get a J30, it's basically a four door 300zx
Ok the geometry of the maxima is set up so good the way it is right now. So if you tried to make it rear wheel drive you would just be waisting your time money and your maxima. You would have to be an automotive engineer to do this project right. Now I know this was a joke and I shouldn't get worked up about it, but if you want a rear wheel drive 4 door nissan. Go get a J30, it's basically a four door 300zx
a j30????????????????????????
Is this guy joking?
#24
#26
Originally posted by dko
recently it has become extremely fashionable to create ridiculous threads and post thinly-veiled satirical comments in response to stupid questions. this is one of those threads. thought you might like to know.
recently it has become extremely fashionable to create ridiculous threads and post thinly-veiled satirical comments in response to stupid questions. this is one of those threads. thought you might like to know.
The sarcasm in this one could have been made a little more obvious though
#27
Originally posted by MaximaGTR311
Ok the geometry of the maxima is set up so good the way it is right now. So if you tried to make it rear wheel drive you would just be waisting your time money and your maxima. You would have to be an automotive engineer to do this project right. Now I know this was a joke and I shouldn't get worked up about it, but if you want a rear wheel drive 4 door nissan. Go get a J30, it's basically a four door 300zx
Ok the geometry of the maxima is set up so good the way it is right now. So if you tried to make it rear wheel drive you would just be waisting your time money and your maxima. You would have to be an automotive engineer to do this project right. Now I know this was a joke and I shouldn't get worked up about it, but if you want a rear wheel drive 4 door nissan. Go get a J30, it's basically a four door 300zx
#28
What about DWD?????
You know... Driver Wheel Drive!
Your drive wheels are your LF and LR... I'm looking for the right shop to make this happen for me, cuz I tend to turn right a LOT, and this would definitely help out.
Any suggestions on a shop in Austin TX that could handle this?
Thanks,
Your drive wheels are your LF and LR... I'm looking for the right shop to make this happen for me, cuz I tend to turn right a LOT, and this would definitely help out.
Any suggestions on a shop in Austin TX that could handle this?
Thanks,
#29
#31
Originally posted by Chebosto
oh. guess what guys.
i spent the last 20 hours converting my SC maxima to a unicycle!
its great! picts up soon!
oh. guess what guys.
i spent the last 20 hours converting my SC maxima to a unicycle!
its great! picts up soon!
Well, I just spent all night and all of $0 converting my Max to NO WHEEL DRIVE!
I am the Maxima Master!!
#32
I just converted my Maxima into a 4 door automagic and even threw in a VQ engine in it .... WOW!!!! What a difference.
It's also capable of FWD <-> RWD switch on the fly thanks to my automagic trnasmission. I put it in D (or any forward gear) and it's FWD. I put it in R and drive backwards, and in theory, it becomes a RWD.
It's also capable of FWD <-> RWD switch on the fly thanks to my automagic trnasmission. I put it in D (or any forward gear) and it's FWD. I put it in R and drive backwards, and in theory, it becomes a RWD.
#33
Ok ... I think we've had enough fun with this one.
But to those who complained. You'll notice that there is a link under each post: "Report this post to a moderator"
If you feel that the thread or post is not something that belongs, please feel free to click on it. You will not leave the Org and the email gets sent to me and mzmtg (or if you are in another forum, it gets sent to the moderators of that forum).
We will take a look at it and decide if the thread/post needs moderating.
I usually let this kind of thread slide a little. No need to be total bores. But some people are right, there have been a bit of these kinds of threads recently, so I'm locking this one.
But to those who complained. You'll notice that there is a link under each post: "Report this post to a moderator"
If you feel that the thread or post is not something that belongs, please feel free to click on it. You will not leave the Org and the email gets sent to me and mzmtg (or if you are in another forum, it gets sent to the moderators of that forum).
We will take a look at it and decide if the thread/post needs moderating.
I usually let this kind of thread slide a little. No need to be total bores. But some people are right, there have been a bit of these kinds of threads recently, so I'm locking this one.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
Calabar
4th Generation Classifieds (1995-1999)
3
10-05-2015 09:57 PM
Hdnseek
5th Generation Maxima (2000-2003)
3
09-09-2015 05:55 AM