My McDonadls Suspension is done.....pics
Thread Starter
Supporting Maxima.org Member
Joined: Jun 2001
Posts: 1,470
My McDonadls Suspension is done.....pics
Quick Rundown:
Items: Kyb Agx(red struts)/ maxspeed install(yellow springs)........hence the McDonalds effect.
Time taken: 6hrs - 2ppl
Number of times i siad "We F***ed up": 8
Number of times we actually did f*** up: 3
Excess trips for parts: 2
Number of things that problematic(ex: noises, lose things) still: 0
http://home.socal.rr.com/dhan/Main.html
I finished up lowering my car yesterday but was way too tired to post so im doing it now. End result first; the handleing is awsome alot of sway is just plain gone, fwy riding is great too. In short, im very happy with the end result.
Now a few things i want to say that you will need and not need:
1. As posted in the sticke up top, it says you can use clear tubing from Home Depot with I.D. of 1/2"
1a. This does not work, the tubing is such that is does not curve in realtion the the spring
2. Wire wrap from the radio shack worked very nicly, i would suggeset getting 2 packs tho
3. Make sure you got the proper tools, this definitly includes a spring compressor, not so much for the rear but for the front when installing AND removing. Tools definitly needed were a breaker bar, and large socket set, those dinky 30pc sets for everyday use aint gonna cut it. Lastly i would say the use of mutiple jack stands, i used about 6, but this was because i kept the whol car on jacks.
4. I did not need to replace anything at the time, with exception the the orange gasket that goes atop the spring/under the mount. My car has 30k.
All in all it was a great learning experince and feel that should i need to do it again it would be more like a 3 hour job with 2 ppl. Enjoy the pics.
Items: Kyb Agx(red struts)/ maxspeed install(yellow springs)........hence the McDonalds effect.
Time taken: 6hrs - 2ppl
Number of times i siad "We F***ed up": 8
Number of times we actually did f*** up: 3
Excess trips for parts: 2
Number of things that problematic(ex: noises, lose things) still: 0
http://home.socal.rr.com/dhan/Main.html
I finished up lowering my car yesterday but was way too tired to post so im doing it now. End result first; the handleing is awsome alot of sway is just plain gone, fwy riding is great too. In short, im very happy with the end result.
Now a few things i want to say that you will need and not need:
1. As posted in the sticke up top, it says you can use clear tubing from Home Depot with I.D. of 1/2"
1a. This does not work, the tubing is such that is does not curve in realtion the the spring
2. Wire wrap from the radio shack worked very nicly, i would suggeset getting 2 packs tho
3. Make sure you got the proper tools, this definitly includes a spring compressor, not so much for the rear but for the front when installing AND removing. Tools definitly needed were a breaker bar, and large socket set, those dinky 30pc sets for everyday use aint gonna cut it. Lastly i would say the use of mutiple jack stands, i used about 6, but this was because i kept the whol car on jacks.
4. I did not need to replace anything at the time, with exception the the orange gasket that goes atop the spring/under the mount. My car has 30k.
All in all it was a great learning experince and feel that should i need to do it again it would be more like a 3 hour job with 2 ppl. Enjoy the pics.
Heyy..I also did mine as well last weekend...
..but I only did the fronts though.... since there was a cop standing by and he did not like the fact that I changed the suspension at the DMV parking lot...
BTW... your car looks good! I measured the gap between the front fender and the tire, and mine is about 3 fingers. Looking at your pics, I believe you also have about 3 fingers.
One thing though, how do you clip those brake lines on the fronts? It was my hardest task yet.... I was having a hard time to put those clips back on the KYBs...
Since I haven't done my rears, I don't know just yet....but I believe it would be like yours....
Congrats man!
ps: It took me 5 hours to do the fronts since I and my girlfriend spent 1 hour trying to lift the car up (the asphalt was too soft so we dig numerous holes on the ground), but installation time is about 3 hours.
BTW... your car looks good! I measured the gap between the front fender and the tire, and mine is about 3 fingers. Looking at your pics, I believe you also have about 3 fingers.
One thing though, how do you clip those brake lines on the fronts? It was my hardest task yet.... I was having a hard time to put those clips back on the KYBs...
Since I haven't done my rears, I don't know just yet....but I believe it would be like yours....
Congrats man!
ps: It took me 5 hours to do the fronts since I and my girlfriend spent 1 hour trying to lift the car up (the asphalt was too soft so we dig numerous holes on the ground), but installation time is about 3 hours.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
Apr 16, 2020 05:15 AM
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
Nov 1, 2015 01:34 PM
JakeOfAllTrades
7th Generation Maxima (2009-2015)
1
Sep 30, 2015 03:16 PM
