5th Generation Classifieds (2000-2003) Buy, sell, trade parts for 2000-2003 Maximas

F/S: 02 smoked tails, 00-01 stillen Y, wind deflector

Thread Tools
 
Search this Thread
 
Old Jan 3, 2007 | 04:00 PM
  #1  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
F/S: 02 smoked tails, 00-01 stillen Y, wind deflector

Happy New years everyone!

I've got some things up for grabs and prices are as listed w/o shipping. I'd rather not ship the Y pipe either. Here's the list:
- 00-01 OEM headlights (AE'd) $60
These are the OEM ones off my car before I did the 02 conversion. They are smoked with glossy black paint. The driver side headlight has a scratch across the turn signal, as you can see in the picture. I have not attempted to clean these but from the looks of it, you can get most, if not all, the "dullness" and sealant (with goo gone and a wet sanding procedure).

- 02-03 tails ***SOLD***
Smoked, I used a dremel to take it apart, was more difficult that I had anticipated so after glueing it back together, I had to paint the trim black for a more clean look. There are two missing screws for the left tail (two in tact), does not affect installation, seems as though the factory seal + two screws tighten it up fine. Me and another .org member broke the tab on the top, pics below... not visible from outside but only when you pop open the trunk.

- Stillen Y-Pipe (00-01 cali spec) $70
Came with the car when purchased, don't know the exact mileage but I put 15,000 mi. Flex section IS still good, although it doesn't look it (NE daily driver). Perfectly working condition, came off the car 7-8 months ago.

- OEM wind deflector (with screws ready to mount) $30
Self explainatory, came with the car and in great condition, no major scratches and no cracks.

- OEM 00-01 M/T shifter assembly (non smoker) $25
No scratches, great condition.





Old Jan 3, 2007 | 04:05 PM
  #2  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA






Thanks for stopping by (San Diego)
Old Jan 3, 2007 | 04:22 PM
  #3  
03blackmaxse's Avatar
Senior Member
 
Joined: Nov 2006
Posts: 187
From: Toronto, ON
Very interested in smoked tails. Will you ship to Toronto, Canada? Please e-mail me at destructivedj@hotmail.com b/c I can't PM for some reason. Thanks.
Old Jan 3, 2007 | 04:38 PM
  #4  
03blackmaxse's Avatar
Senior Member
 
Joined: Nov 2006
Posts: 187
From: Toronto, ON
sorry about the double post, I saw the other one and thought my post didn't go through, now I see both.
Old Jan 5, 2007 | 10:53 AM
  #5  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
PM sent. Everything still up for sale
Old Jan 5, 2007 | 11:44 AM
  #6  
AcidJake75's Avatar
Senior Member
iTrader: (7)
 
Joined: Aug 2006
Posts: 335
From: DFW, TX
Please send PICS of the back of the tails to j_p_texmexis@hotmail.com ..Im debating on purchase...Im also sending you a PM..

Thanks
Old Jan 5, 2007 | 08:20 PM
  #7  
carsarecool's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: May 2005
Posts: 738
hmm i really like those smoked tails, its like the best of both 01 and 02....how much again?
Old Jan 6, 2007 | 10:49 AM
  #8  
MaxedOut's Avatar
Senior Member
iTrader: (4)
 
Joined: Aug 2000
Posts: 2,104
bump for a good guy.. good luck on ur sales!

if the tails didnt have yellow in em.. i would buy them
Old Jan 7, 2007 | 12:57 PM
  #9  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
Wussup Chris, hope that new max is treatin you well. Thanks for the bump!

Tails are $85, I'm accepting PM's and calculating shipping prices. So bare with me, I'm not ignoring, PM's are pending!
Old Jan 10, 2007 | 06:31 AM
  #10  
9maxima5's Avatar
Supporting Maxima.org Member
iTrader: (7)
 
Joined: Sep 2004
Posts: 721
please check pms
Old Jan 10, 2007 | 01:38 PM
  #11  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
Responded. And regarding the other pm's on tails, sales are pending and will let everyone know by friday how the situation lies. Thanks.
Old Jan 11, 2007 | 02:31 PM
  #12  
WildMax01's Avatar
Member
 
Joined: May 2006
Posts: 190
Hey you still have the y pipe
Old Jan 13, 2007 | 10:24 AM
  #13  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
Originally Posted by WildMax01
Hey you still have the y pipe
Updated. Yes, Y-pipe is available.
Old Jan 13, 2007 | 10:41 AM
  #14  
spencediggy's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2003
Posts: 487
tails still available?
Old Jan 16, 2007 | 12:18 PM
  #15  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
Tails are sold! Everything else is available.
Old Jan 16, 2007 | 01:04 PM
  #16  
Deckdout2's Avatar
Play with my balls
iTrader: (151)
 
Joined: Sep 2002
Posts: 6,541
From: Charlotte, NC
Nice work on the tails man! Major props.
Old Jan 16, 2007 | 01:52 PM
  #17  
WildMax01's Avatar
Member
 
Joined: May 2006
Posts: 190
Hey how much on the y pipe shipped to IL
Old Jan 16, 2007 | 05:11 PM
  #18  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
Originally Posted by Deckdout2
Nice work on the tails man! Major props.
Thanks! I tacked the job being nervous but it came out clean and aggressive. I might try this again except without the amber.

Can't get a box for the y pipe and I don't have a problem shipping it though. Let me get back to you on this.
Old Jan 17, 2007 | 10:08 AM
  #19  
Deckdout2's Avatar
Play with my balls
iTrader: (151)
 
Joined: Sep 2002
Posts: 6,541
From: Charlotte, NC
Originally Posted by OOmaxSE
Thanks! I tacked the job being nervous but it came out clean and aggressive. I might try this again except without the amber.

Can't get a box for the y pipe and I don't have a problem shipping it though. Let me get back to you on this.
I don't want your f'ucking y-pipe.
Old Jan 18, 2007 | 02:04 PM
  #20  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
Originally Posted by Deckdout2
I don't want your f'ucking y-pipe.
Read up a few posts, you'll see who that response was intended for
Old Jan 20, 2007 | 08:58 AM
  #21  
snair2's Avatar
Senior Member
iTrader: (3)
 
Joined: Oct 2004
Posts: 276
y-pipe still up for sale? interested. any idea how much the entire thing is shipped to 11003?
Old Jan 21, 2007 | 08:01 AM
  #22  
h82brag2u's Avatar
Junior Member
 
Joined: Jan 2007
Posts: 17
will y-pipe fit 03 SE?
Old Jan 22, 2007 | 01:01 PM
  #23  
MaReK 1R's Avatar
Junior Member
 
Joined: Dec 2006
Posts: 29
~~~Do you still have the Y pipe~~~

is this stock or an performance upgrade ... if upgrade how much do u want for it and the how much to ship it to 11211 oh yea i have a 01 3.0...
Old Jan 26, 2007 | 09:02 AM
  #24  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
Sorry for the late responses guys. I really would like to ship, although I'm just lacking a box to package it in. It's $70 w/o shipping, and until I found out what the real shipping is, I cannot say how much it will be. Will only fit 00-01 cali spec.
Old Feb 15, 2007 | 08:07 AM
  #25  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
Bump and grind.
Old Feb 15, 2007 | 09:56 AM
  #26  
maximaA33ny's Avatar
Junior Member
iTrader: (2)
 
Joined: Feb 2007
Posts: 69
tails is syck.
Old Feb 15, 2007 | 12:01 PM
  #27  
PandaXpress's Avatar
Senior Member
iTrader: (80)
 
Joined: Apr 2005
Posts: 3,184
From: Southern Cali
How much for the shifter trim?
Old Feb 15, 2007 | 05:26 PM
  #28  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
Give me $25 shipped to CA. It's in MINT condition if not perfect.
Old Feb 20, 2007 | 07:21 PM
  #29  
lalaMAX's Avatar
Senior Member
 
Joined: Dec 2004
Posts: 544
will the Y pipe fit on a 00 Fed spec? pm if it do thanx
Old Feb 21, 2007 | 08:19 AM
  #30  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
Originally Posted by lalaMAX
will the Y pipe fit on a 00 Fed spec? pm if it do thanx
Cali spec only, sorry.
Old Feb 21, 2007 | 08:57 AM
  #31  
absoundlab
Guest
 
Posts: n/a
how much do you want for the shift boot?
Old Feb 21, 2007 | 09:04 AM
  #32  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
PM sent. Thanks.
Old Mar 2, 2007 | 05:58 PM
  #33  
OOmaxSE's Avatar
Thread Starter
Senior Member
iTrader: (19)
 
Joined: Jan 2005
Posts: 1,908
From: Amherst, MA
New item. AE'd headlights.
Old Mar 4, 2007 | 07:15 PM
  #34  
cman6453's Avatar
Member
 
Joined: Nov 2005
Posts: 41
PM'd you about the headlights...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigdogsteve
7th Generation Maxima (2009-2015)
12
Jan 31, 2018 04:18 PM
Fbana41
Maximas for Sale / Wanted
3
Aug 29, 2016 12:18 PM
05RLS2
7th Generation Maxima (2009-2015)
4
Apr 14, 2016 11:49 AM
Nv2dmaxmd
4th Generation Classifieds (1995-1999)
6
Oct 19, 2015 05:37 PM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
Sep 29, 2015 02:02 PM




All times are GMT -7. The time now is 07:34 AM.