FS: A Lot of Mods & S/C Components
#1
FS: A Lot of Mods & S/C Components
I've updated the thread and Deleted the pics of the Sold Items
I also have a 2001 Auto VLSD from my blown 01 tranny if anyone wants it for a re-build. I lost 1st & reverse in my transmission this summer, but the VLSD was obviously unharmed. If someone wants this for a re-build or for a "Bullet-proof tranny", pm me.
I have a lot of things for sale here.
Some of these are slightly used components from my own car, and some are part of a Supercharger kit that I bought from a 4th Gen. I have a 5th Gen, so I had to find some components that would suit my car better, and hence I'll be selling the unused components here.
I'll post as many pics as I can in the first post, and the rest further down in later posts.
All prices are negotiable, as I've based them on either what I paid for the parts, or what other guys have sold them for in the past. Please keep negative comments to the pm's, and if I see that I have something real overpriced or underpriced, I'll correct accordingly. Buyer Pays Shipping.
You can make offers via pm, or for those of you who aren't allowed to pm yet, at thatguycole@hotmail.com
Thanks for looking.
Apexi VAFC-II with Apexi Mounting Plate
24 point (Hi/Lo) tuning resolution with Vtec Function
Apexi VAFC-II Manual - http://www.apexi-usa.com/pdfInstallation/25.pdf
Sold!!!
Z32 MAF with Labeled Pigtail
MAF Upgrade for Increased Flow Ability
Sold!!!
I also have a 2001 Auto VLSD from my blown 01 tranny if anyone wants it for a re-build. I lost 1st & reverse in my transmission this summer, but the VLSD was obviously unharmed. If someone wants this for a re-build or for a "Bullet-proof tranny", pm me.
I have a lot of things for sale here.
Some of these are slightly used components from my own car, and some are part of a Supercharger kit that I bought from a 4th Gen. I have a 5th Gen, so I had to find some components that would suit my car better, and hence I'll be selling the unused components here.
I'll post as many pics as I can in the first post, and the rest further down in later posts.
All prices are negotiable, as I've based them on either what I paid for the parts, or what other guys have sold them for in the past. Please keep negative comments to the pm's, and if I see that I have something real overpriced or underpriced, I'll correct accordingly. Buyer Pays Shipping.
You can make offers via pm, or for those of you who aren't allowed to pm yet, at thatguycole@hotmail.com
Thanks for looking.
Apexi VAFC-II with Apexi Mounting Plate
24 point (Hi/Lo) tuning resolution with Vtec Function
Apexi VAFC-II Manual - http://www.apexi-usa.com/pdfInstallation/25.pdf
Sold!!!
Z32 MAF with Labeled Pigtail
MAF Upgrade for Increased Flow Ability
Sold!!!
Last edited by NewfoundlandDud; 03-24-2008 at 02:33 PM.
#2
CosmoRacing Intake (5th Gen)
Only 3k Miles on this in 3 months of use
Very Clean Air Filter
Includes MAF to Air Filter Adapter (3”)
Sold!!!
Aluminum FSTB
Sold!!!
Only 3k Miles on this in 3 months of use
Very Clean Air Filter
Includes MAF to Air Filter Adapter (3”)
Sold!!!
Aluminum FSTB
Sold!!!
Last edited by NewfoundlandDud; 03-27-2008 at 08:41 AM.
#3
Brand New Stainless Steel Magnaflow Resonator 14416
Comes Brand New in Plastic with Lifetime Warranty Card
2.5" In/Out, Length 14"/20", 4" Round
$100
Comes Brand New in Plastic with Lifetime Warranty Card
2.5" In/Out, Length 14"/20", 4" Round
$100
Last edited by NewfoundlandDud; 03-17-2008 at 01:13 PM.
#4
Vortech FMU with Extra's
Vortech FMU
Brass Mounting Plate
Fuel Lines & Vacuum Line
Re-build Kit (6:1 Re-build Kit).
$130
Vortech FMU
Brass Mounting Plate
Fuel Lines & Vacuum Line
Re-build Kit (6:1 Re-build Kit).
$130
Last edited by NewfoundlandDud; 03-30-2008 at 01:27 PM.
#7
8 Purple Top Injectors (2 Left!! - $50 OBO)
I priced these low because I realized that one of the clips has a piece broken.
The connector is still fine, but the clip looks like someone broke a piece of the plastic when removing them.
Stillen S/C Air Filter, Bosch BOV & Fittings
I have the Stillen Air Filter
Bosch BOV (Not Pictured)
BOV to 4th Gen Charge Piping Adapter (Not Pictured Here)
BOV Re-Circulation Hose & Fittings
I can get pics of the BOV & Adapter if interested
$80
I priced these low because I realized that one of the clips has a piece broken.
The connector is still fine, but the clip looks like someone broke a piece of the plastic when removing them.
Stillen S/C Air Filter, Bosch BOV & Fittings
I have the Stillen Air Filter
Bosch BOV (Not Pictured)
BOV to 4th Gen Charge Piping Adapter (Not Pictured Here)
BOV Re-Circulation Hose & Fittings
I can get pics of the BOV & Adapter if interested
$80
Last edited by NewfoundlandDud; 03-27-2008 at 08:38 AM.
#8
Large K&N Filter for S/C CAI
Including Large 3" Coupler pictured for 3" CAI
The small elbow pictured doesn't belong to this, so not included obviously
Sold!!!
Double Gauge Pod & Single Gauge Pod - 2 1/16" (52mm)
Single - Sold
Double - Sold!!!
Including Large 3" Coupler pictured for 3" CAI
The small elbow pictured doesn't belong to this, so not included obviously
Sold!!!
Double Gauge Pod & Single Gauge Pod - 2 1/16" (52mm)
Single - Sold
Double - Sold!!!
Last edited by NewfoundlandDud; 03-24-2008 at 02:34 PM.
#9
Brand New Prosport EGT Gauge
Electrical, with Blue LED's and with "Opening Ceremony".
Sold!!!
Autometer Boost Gauge
Includes all wiring and mounting equipment
SOLD!!!
Electrical, with Blue LED's and with "Opening Ceremony".
Sold!!!
Autometer Boost Gauge
Includes all wiring and mounting equipment
SOLD!!!
Last edited by NewfoundlandDud; 03-24-2008 at 02:34 PM.
#10
Autometer Pyrometer Gauge (EGT Gauge)
Includes Sensor, Wiring and Mounting Equipment, etc.
$100
Autometer Fuel Pressure Gauge
Needs a new sender
$100
If you have any questions about any of this stuff, please feel free to contact me by pm, or at thatguycole@hotmail.com
Includes Sensor, Wiring and Mounting Equipment, etc.
$100
Autometer Fuel Pressure Gauge
Needs a new sender
$100
If you have any questions about any of this stuff, please feel free to contact me by pm, or at thatguycole@hotmail.com
Last edited by NewfoundlandDud; 03-17-2008 at 01:15 PM.
#11
ill take the gauge pod not tryin to low blow.. But your asking alot for the double.. Ill give you 20$ for the double....
#12
There's a triple gauge pod being sold on here for $60, and the singles are worth $20. I took this into account and priced accordingly.
If you PM me a better price, I'd consider it. But $20 is not what I'm looking for.
Please people, if you're going to lowball, keep it to the pm's.
If you PM me a better price, I'd consider it. But $20 is not what I'm looking for.
Please people, if you're going to lowball, keep it to the pm's.
#14
Wow.
Pm me your address, and I'd have to get a shipping quote, and find a big enough box to put all of this in.
Please only pm me about this if you are serious, since it will be a lot of work to weigh and box everything, then get the quote.
Thanks.
Pm me your address, and I'd have to get a shipping quote, and find a big enough box to put all of this in.
Please only pm me about this if you are serious, since it will be a lot of work to weigh and box everything, then get the quote.
Thanks.
#15
To the member who pm'd me about the Z32 MAF, Injectors, etc.
I tried to send you another pm, but your Inbox quota is full, so you'll have to erase some messages so that I can pm you back again.
I tried to send you another pm, but your Inbox quota is full, so you'll have to erase some messages so that I can pm you back again.
#16
How much for the just the chrome elbow piece with IAT sensor, couplers and the rings to tighten shipped to Chicago, IL?
http://forums.maxima.org/showpost.ph...07&postcount=2
http://forums.maxima.org/showpost.ph...07&postcount=2
#18
There's a triple gauge pod being sold on here for $60, and the singles are worth $20. I took this into account and priced accordingly.
If you PM me a better price, I'd consider it. But $20 is not what I'm looking for.
Please people, if you're going to lowball, keep it to the pm's.
If you PM me a better price, I'd consider it. But $20 is not what I'm looking for.
Please people, if you're going to lowball, keep it to the pm's.
#19
Alright guys, so I'm getting through all of the pm's right now and here's a little update:
1) Nothing has been sold yet, but there has been a lot of interest in a lot of the stuff. As far as dibs go, I'll go about it two ways:
- If you have pm'd me about a part and I gave you a quote on shipping, etc. I'll wait until the end of that day before I let the next guy have it. Whoever has the payment ready will get the part (with the exception of waiting for you response of course).
There's been a lot of interest in the Z32 MAF, the VAFC II and the intake.
I'll hold the Z32 and VAFC II until the end of today then whoever pays first gets it. The Intake includes everything pictured, except for my car's MAF of course and the two brass male-male connections that you wouldn't need for install anyway. This intake has everything that you need for the install. Of course you can always choose to replace the hoses with aftermarket lines, or use your stock lines, but all of the couplers and adapters needed are included. I'll start a dibs post at the top, and like I said whoever wants to pay first will get the part.
wirelessdude04:
If you want to make me a reasonable offer, pm me.
Please stop discussing your opinion of the gauge pod in my thread.
Thank You.
1) Nothing has been sold yet, but there has been a lot of interest in a lot of the stuff. As far as dibs go, I'll go about it two ways:
- If you have pm'd me about a part and I gave you a quote on shipping, etc. I'll wait until the end of that day before I let the next guy have it. Whoever has the payment ready will get the part (with the exception of waiting for you response of course).
There's been a lot of interest in the Z32 MAF, the VAFC II and the intake.
I'll hold the Z32 and VAFC II until the end of today then whoever pays first gets it. The Intake includes everything pictured, except for my car's MAF of course and the two brass male-male connections that you wouldn't need for install anyway. This intake has everything that you need for the install. Of course you can always choose to replace the hoses with aftermarket lines, or use your stock lines, but all of the couplers and adapters needed are included. I'll start a dibs post at the top, and like I said whoever wants to pay first will get the part.
wirelessdude04:
If you want to make me a reasonable offer, pm me.
Please stop discussing your opinion of the gauge pod in my thread.
Thank You.
#20
My Paypal address is puddincole@gmail.com
please include the part that you wanted and the cost for shipping in your payment.
pm me your address and I'll give you a shipping quote over pm.
please include the part that you wanted and the cost for shipping in your payment.
pm me your address and I'll give you a shipping quote over pm.
#21
Z32 MAF
Injectors
K&N CAI Filter
All pending sale.
I think that these are definitely sold, if not, I'll update tomorrow.
VAFC-II
Lots of interest, no dibs yet.
You can pm me your shipping address for a quote & dibs if seriously interested guys.
Injectors
K&N CAI Filter
All pending sale.
I think that these are definitely sold, if not, I'll update tomorrow.
VAFC-II
Lots of interest, no dibs yet.
You can pm me your shipping address for a quote & dibs if seriously interested guys.
#23
Here is the link to the VAFC-II Manual:
http://www.apexi-usa.com/pdfInstallation/25.pdf
http://www.apexi-usa.com/pdfInstallation/25.pdf
#25
Hey Guys, I mentioned that we were getting snow here tonight.....God Damn!
Only been snowing for about 4 hours.....supposed to continue into tomorrow night.
In this pic:
1) Snow Drift the height of my Civic
2) The Roof of my Civic
3) Snow Built-up above the bumper
Only been snowing for about 4 hours.....supposed to continue into tomorrow night.
In this pic:
1) Snow Drift the height of my Civic
2) The Roof of my Civic
3) Snow Built-up above the bumper
#26
I also have a 2001 Auto VLSD from my blown 01 tranny if anyone wants it for a re-build. I lost 1st & reverse in my transmission this summer, but the VLSD was obviously unharmed. If someone wants this for a re-build or for a "Bullet-proof tranny", pm me.
#27
Alright, I think that there has been some confusion with the application of the intake, probably because I didn't specify correctly when I posted, my fault.
The intake will fit a 5th Gen Maxima (Meaning 2000-2001). The 4th Gen and 5.5 Gen Maxima's have a different mid-pipe (The Polished Pipe), so this won't fit.
I've had literally about 15 guys e-mail and pm me about this with money in hand from both this forum & the NYC .org, but they've been 4th Gen and 5.5 Gen guys.......Hilarious.
The intake will fit a 5th Gen Maxima (Meaning 2000-2001). The 4th Gen and 5.5 Gen Maxima's have a different mid-pipe (The Polished Pipe), so this won't fit.
I've had literally about 15 guys e-mail and pm me about this with money in hand from both this forum & the NYC .org, but they've been 4th Gen and 5.5 Gen guys.......Hilarious.
#31
Hey guys,
Just to let everyone know, the shipping on the FSTB is a bit ridiculous.
Because the thing is so long, it's going to cost over $25 to ship it alone.
This makes it almost stupid to try and sell on here. I never realized this until I started looking up shipping quotes.
It wouldn't be so bad if it were thrown in with something else, because then shipping kind of combines. Basically they can charge you be shipping weight or shipping volume (Whichever is greatest). The FSTB only weighs a few pounds, but the volume makes it ship as though it were much heavier. If it were thrown in with say the V2 plate or the resonator, it wouldn't be so bad because they'd probably charge by weight.
I'll ship it to anyone who really wants it, but I'm just letting everyone know that the shipping isn't pretty. I've tried to be as honest & fair with the pm's as possible, for example I could have sold that intake to a few 4th & 5.5 gen guys easily, but it would not have worked, so I told them. Most of what's left is pretty universal, but if it's going to cause you problems (ex. trying to make the Z32 MAF work on a 5th Gen), then I'll let you know when you contact me.
Thanks for looking, and happy modding.
Just to let everyone know, the shipping on the FSTB is a bit ridiculous.
Because the thing is so long, it's going to cost over $25 to ship it alone.
This makes it almost stupid to try and sell on here. I never realized this until I started looking up shipping quotes.
It wouldn't be so bad if it were thrown in with something else, because then shipping kind of combines. Basically they can charge you be shipping weight or shipping volume (Whichever is greatest). The FSTB only weighs a few pounds, but the volume makes it ship as though it were much heavier. If it were thrown in with say the V2 plate or the resonator, it wouldn't be so bad because they'd probably charge by weight.
I'll ship it to anyone who really wants it, but I'm just letting everyone know that the shipping isn't pretty. I've tried to be as honest & fair with the pm's as possible, for example I could have sold that intake to a few 4th & 5.5 gen guys easily, but it would not have worked, so I told them. Most of what's left is pretty universal, but if it's going to cause you problems (ex. trying to make the Z32 MAF work on a 5th Gen), then I'll let you know when you contact me.
Thanks for looking, and happy modding.
#35
Do you have the coupler and sleeve that comes in from the SC to the air filter. Thats the last piece that I am missing or if you can make a really good deal on the Bosch BOV and filter with the charge stuff etc. Just let me know. Thanks.
#36
I have the entire air filter setup:
- Filter
- Metal Insert
- Coupler
- BOV line to Filter Insert
You can pm me your address, and an offer.
It's going to cost ~$20-$25 to ship to the US, judging by the size & weight compared to packages that I shipped last week.
- Filter
- Metal Insert
- Coupler
- BOV line to Filter Insert
You can pm me your address, and an offer.
It's going to cost ~$20-$25 to ship to the US, judging by the size & weight compared to packages that I shipped last week.
#40
Pics of the Transmission parts.
It hasn't been cleaned up yet, just torn down.
As stated above, I lost 1st & Reverse in this 4AT last summer, but obviously there are still a lot of functional parts.
I'd stay away from the gear-box (I can't open it anyway)......Well I guess I could with some motivation, but the rest should be fine.
Might be weary of the clutches & solenoids & stuff, but nobody wants them anyway.
Let m know if you need a part, sensor, etc.
It hasn't been cleaned up yet, just torn down.
As stated above, I lost 1st & Reverse in this 4AT last summer, but obviously there are still a lot of functional parts.
I'd stay away from the gear-box (I can't open it anyway)......Well I guess I could with some motivation, but the rest should be fine.
Might be weary of the clutches & solenoids & stuff, but nobody wants them anyway.
Let m know if you need a part, sensor, etc.
Last edited by NewfoundlandDud; 04-12-2008 at 01:23 PM.