Well, my Maxima is totalled, which leaves a number of parts in my garage that i no longer have a use for. listed below are the parts I have remaining. If a price seems high, make a counter offer. Some parts are brand new, some are quite used, so ensure that you read the notes next to the items. PM with questions. Shipping is extra, Chicago area pickup/drop-off available.
UPDATED - Listed items are still available as of 2-1-09
Item / Qty / Part number / Asking price / Notes

Bosch IKON Wipers / 1 set D&P / $30 / New in box
OBX Fuel pressure regulator / 1 / $50 / installed briefly, removed to diagnose separate issue, never reinstalled
SS Clutch Line / 1 / ??? / $25 / New, Does not include banjo and copper washer, unless i find them.
Stock side marker lights / 1 set Rear / ??? / $20 for set
Walker universal O2 sensor (3 wire) / 4 / 250-23000 / $30 each / New in box
Walker universal O2 sensor (4 wire) / 1 / 250-24000 / $20 / Installed briefly, thought it was bad, turned out it was a bad connection, No solderless joints included
Wix Oil Filter / 1 / 51356 / $4 / New in box (of course)
MAF Sensor / 1 / ???? / $50 / Used, Green dot version.
Passenger side steering knuckle / 1 / ??? / $50 / wheel bearing is failed, will ship with new bearing, or for extra $20 I will install new bearing.
Stock crank pulley / 1 / ??? / $10 / fine condition
Front rotor / 2 / 40207 / $30 for set / Thickness 1.05" (nominal according to FSM), should be turned before install.
Rear Rotor / 2 / 43207 / $30 for set / Thickness 0.35" (nominal according to FSM)
Struts / 1 set F 2 sets R / ??? / $25 per set / Mileage unknown, all in good condition
Intake air Resonator / 1 / ??? / $10 / The part a Berk intake replaces.
Ignition coils / 1 R, 2 F / ??? / $10 each / Used, no grey dot
Front Catalytic Converter (CA Spec) / 1 / ??? / $10 / Replaced and turned out not the (only?) problem. No guarantees.
Airtex Fuel Strainer / 1 / FS205 / $5 / New in box
Exhaust hanger / 1 / 35460 / $1 / New in box, see Rock auto for part number
Exhaust hanger / 2 / 35725 / $1 / New in box, see Rock auto for part number
Driver side axle/CV, 20th ann. Manual trans. / 1 / ??? / $15 / used, good working condition.

also still have suspension stuff from previous post, consolidated here:

1 Stock front strut mount with mount bracket (3 bolt piece), $5
Set of Stock springs, @70K. rode well and at proper height when removed. ($30+shipping)
2 KYB front strut mounts (PN=SM5324) 95-99 maximas. Ordered these as they were listed for my '01. Didnt fit up correctly due to the missing spacer. Needed the car so installed with a few washers in place of the spacer. 400 Miles driven until the correct mounts arrived. ($40 for set)

 

How used is the MAF? Is it the origional one or recently replaced? IF replaced give me a ballpark figure on how many miles are on it. Thanks

 

I will take the ES Mounts, I sent an PM

@ the above poster, the green dot is the new P/N so it should be good to go

 

Thanks oh will an 01 MAF fit on an 2000. I don't know if they have the same PN

 

Sorry to hear about the loss...any chance you have the headlights, lip, door sills? I'm in Chicago Area and would take some off your hands...If it was in a front end accident, I guess I would take the door sills if you got them...

 

I no longer have the vehicle, insurance company took possesion in the totalling, and unfortunately i wasnt able to get parts off of it, illuminas/vogtlands, UR pulley, progress RSB, Stillen FSB, etc. etc. Some junkyard is gonna have a little more than it realizes soon. What is listed is pretty much all i have. and yes it was front end accident, if i can get the pics off of my phone i will post them.

 

Ahhh got ya, thanks anyway...lol yea I'd love to find that junkyard though.

 

^^^ post above???? on the MAF will it fit a 2k max. I think it will but just wanna make sure, sorry. Thanks

 

^^^ yup, see PM.

 

got the pm oh I was asking did you have the MAP too- I knew the MAF and MAP are different parts. PM sent on the payment for the MAF. Thanks bro

 

If MAF isn't gone, let me know if it will work on an 02 Max. I will take it if it does.

 

don't you hate that...ugh i came one day late and they had already taken possession...

i coulda picked off so many things too.

 

MAF will only fit 3.0 L engines. Sorry.

 

well i didnt really have an option, i guess i could have taken some things off in the body shop parking lot, but laying in 6" of snow for a sway bar seems kinda not worth it. i said my goodbyes though, she was a wonderful car, ill never forget her. Good choice on the SE-R though. I went for the G35 coupe 6mt, killer deal.

 

It'll work on the VQ35 if you swap the thermistor from the old unit.

Also, awesome price on a VLSD axle. That should sell rather quickly.

 

if anyone wants one. not too many VLSD manuals out there

 

Do you have the black tail lights??

 

PM'd

 

still goot the es motor mounts? which ones are they? willing to take them off your hands

 

Do you have the rear strut mounts?

 

Insane - Motor mounts are in process, hashing out details with another buyer, i will let you know if things fall through.

Law - Yes i do, See PM.

 

Matt, please clear out your PM box as it is full

 

PMed

 

Would like to get both exhaust hangers from you. Can you please tell me your shipped price to 28213? Thanks.

 

are the coils in working order? if so I'll take 1 front and 1 rear. Let me know the shipping to 92620. thanks! paypal is ready.

 

got black floor mats?

 

pics of rear side markers

 

Is the wheel bearing oem nissan and new for what year, i have a 2000.

 

still interested in the motor mounts. money in hand if still available!

 

Still got a front coil left?

 

ill buy the Front Catalytic Converter

 

hey
do you have the trunk/gas release switch?