When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
where did you place the ballasts in the engine bay? I installed mine and the ballasts are coming loose with the double sided tape and i don't know if it's because the spot i put them in or if it's the tape.
Would you do a trade for the oem fogs without HID's? Not for the full 120 tho we could work something out.
No trades since I sold my car a year ago...
Originally Posted by 96nissanmaxse
where did you place the ballasts in the engine bay? I installed mine and the ballasts are coming loose with the double sided tape and i don't know if it's because the spot i put them in or if it's the tape.
I mounted them high up inside the fender above the fogs...you have to removed the splash shields to access that area. 3M double sided tape holds really well.
Originally Posted by soxruled0
find a flat metal spot and use good double sided tape like 3M its really strong stuff.
Yes, and clean the area well with alcohol swabs...do the same with the back of the ballasts.
Setup is 100% plug and play. Just use double sided tape to mount the ballasts.
When you did this conversion, did you cut the little reflector out first or leave it in. Sorry to kinda jump in on your thread, just curious because i've got all my pieces and planning things out before I cut anything up.
When you did this conversion, did you cut the little reflector out first or leave it in. Sorry to kinda jump in on your thread, just curious because i've got all my pieces and planning things out before I cut anything up.