5th Generation Classifieds (2000-2003) Buy, sell, trade parts for 2000-2003 Maximas

CAN-Other Quebec- FS -03 SE 6 spd blk/blk parts car

Old Apr 16, 2011 | 07:07 PM
  #41  
OnOiShNo0dl3Z's Avatar
Senior Member
iTrader: (2)
 
Joined: Apr 2010
Posts: 440
From: Philadelphia, PA
Originally Posted by FrankA33
I'll check the memory switches at work with voltmeter on monday.
Ignition coils available(all 6). Will check those out too at the same time when I take em out.
No info on CEL history unfortunately, is there a way to know apart from asking the previous owners ? i don't know if the computer stores this either.
If it had codes before and has been cleared i don't think you'll be able to find out. But let me know how those readings go.
Old Apr 16, 2011 | 08:06 PM
  #42  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by OnOiShNo0dl3Z
If it had codes before and has been cleared i don't think you'll be able to find out. But let me know how those readings go.
Interior was stripped out today, someone needs the cluster and steering column, the only thing I can check is the condition they are in and check for continuity between terminal 2 and 3 on the coil terminal (reading schematics, lolll)
You need all 6 ??
Old Apr 16, 2011 | 09:47 PM
  #43  
eclipse98's Avatar
Junior Member
iTrader: (1)
 
Joined: Jul 2005
Posts: 97
From: Canada
Hello there, i was wondering if you have the following:

-Steering wheel audio/cruise control modules?
-Gauge cluster
-4 brake rotor metal shield that covers the back side of the rotor
-also what shape is the interior in?
Old Apr 17, 2011 | 08:25 AM
  #44  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by eclipse98
Hello there, i was wondering if you have the following:

-Steering wheel audio/cruise control modules?
-Gauge cluster
-4 brake rotor metal shield that covers the back side of the rotor
-also what shape is the interior in?
-Sale pending on steering wheel audio/cruise modules, gauge cluster for one person.
-the 4 metals shields I will check their condition, 25$ + shipping, will just need your postal code for quote fellow canucker
-interior I am trying to reach the others that were in line before you, you second or 3rd in line for these. Keep you posted on this.
Old Apr 17, 2011 | 08:56 AM
  #45  
eclipse98's Avatar
Junior Member
iTrader: (1)
 
Joined: Jul 2005
Posts: 97
From: Canada
Originally Posted by FrankA33
-Sale pending on steering wheel audio/cruise modules, gauge cluster for one person.
-the 4 metals shields I will check their condition, 25$ + shipping, will just need your postal code for quote fellow canucker
-interior I am trying to reach the others that were in line before you, you second or 3rd in line for these. Keep you posted on this.
postal code B4A1V5, as for the other parts please do let me know if the sale doesnt go through!
Old Apr 17, 2011 | 08:56 AM
  #46  
eclipse98's Avatar
Junior Member
iTrader: (1)
 
Joined: Jul 2005
Posts: 97
From: Canada
Old Apr 18, 2011 | 09:26 PM
  #47  
OnOiShNo0dl3Z's Avatar
Senior Member
iTrader: (2)
 
Joined: Apr 2010
Posts: 440
From: Philadelphia, PA
Originally Posted by FrankA33
Interior was stripped out today, someone needs the cluster and steering column, the only thing I can check is the condition they are in and check for continuity between terminal 2 and 3 on the coil terminal (reading schematics, lolll)
You need all 6 ??
How much did you want for each or the set?
Old Apr 19, 2011 | 06:22 AM
  #48  
Deckdout2's Avatar
Play with my balls
iTrader: (151)
 
Joined: Sep 2002
Posts: 6,541
From: Charlotte, NC
Frankie! lol

Another question for you, do you have the power steering low pressure hose? It just goes from the reservoir container to the pump. Not the high pressure one. if so, how much shipped to me @ 28277? Thanks buddy!
Old Apr 19, 2011 | 04:46 PM
  #49  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by OnOiShNo0dl3Z
How much did you want for each or the set?
30$ for one coilpack, 150$ for all 6
15$ for the memory switch. I'll get a quote for you soon. I have no time during the week unfortunately. I have friday and monday off, will spend most of my easter holiday on the car.

Originally Posted by Deckdout2
Frankie! lol

Another question for you, do you have the power steering low pressure hose? It just goes from the reservoir container to the pump. Not the high pressure one. if so, how much shipped to me @ 28277? Thanks buddy!
Sure thing man, same thing, I'll get the quote for you on the weekend and hopefully ship it next week at the latest.
Old Apr 30, 2011 | 09:11 PM
  #50  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
TTT
First post updated with removed parts now for sale.
Ask if you need something not listed yet !
Old Apr 30, 2011 | 09:47 PM
  #51  
'02 Style's Avatar
Member
 
Joined: Jan 2003
Posts: 200
From: Murfreesboro, TN
Do you have the main driver side window switch?
Old May 3, 2011 | 08:54 AM
  #52  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by '02 Style
Do you have the main driver side window switch?

pm'ed
Old May 5, 2011 | 07:23 PM
  #53  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Almost weekend bump !
Old May 5, 2011 | 08:13 PM
  #54  
Ghost_54's Avatar
Senior Member
iTrader: (13)
 
Joined: Nov 2007
Posts: 1,364
From: Burlington, Ontario Canada
How much for the rear Pre-Cat (bank 1 closest to the fire wall) as well as how much for the bank 1 o2 sensors (primary and secondary) ... whats the condition on the main cat (under the car) and how much ... I am in Ontario shipping info is L7R 3T8
Old May 5, 2011 | 08:36 PM
  #55  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
pm'ed
Old May 7, 2011 | 12:25 AM
  #56  
BLACKKILA.GTR's Avatar
Senior Member
iTrader: (16)
 
Joined: Oct 2006
Posts: 1,196
From: CALI UNDER A PALM TREE
HOW MUCH FOR THE DRIVER SEAT SHIPPED??

also do u have the plastic piece out the truck that covrs up the metal where the truck latch goes??
Old May 7, 2011 | 07:52 AM
  #57  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by BLACKKILA.GTR
HOW MUCH FOR THE DRIVER SEAT SHIPPED??

also do u have the plastic piece out the truck that covrs up the metal where the truck latch goes??
you got PM !
Old May 7, 2011 | 09:55 AM
  #58  
kissmymax's Avatar
Member
 
Joined: Apr 2009
Posts: 126
From: Baltimore County, MD
how much to ship seats to 21228
Old May 7, 2011 | 07:34 PM
  #59  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by kissmymax
how much to ship seats to 21228
front or rear ? as you are not first in line for these, I will let you know if the others fall through in time.
As for the quote, and to answer to the others that will ask or that have done so, I've looked up Fedex since they have the best shipping prices for big parts. From here to a big majority of the states, 46lbs to 54 lbs/21kg to 24.7kg ranges between 52$ to 90$. I just weighed the driver(54lbs) and passenger seat(46lbs). I'm bookmarking this ground rates thing for further use.
Old May 8, 2011 | 12:52 AM
  #60  
StevieB's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Nov 2002
Posts: 256
From: Montreal, QC,Canada
rear view mirror

Salut Frank!
Didn't see it mentioned anywhere-do you have the autodim rearview mirror?
Je suis a Brossard.
Thanks.
Old May 8, 2011 | 06:10 AM
  #61  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by StevieB
Salut Frank!
Didn't see it mentioned anywhere-do you have the autodim rearview mirror?
Je suis a Brossard.
Thanks.
Salut Stevie !
It's in the parts missing/broken/unserviceable, over SOLD parts.
Si t'as besoin d'autre chose tu me le dira, je doit descendre à Montréal dans pas long.
Frank
Old May 14, 2011 | 08:57 PM
  #62  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Parts added BUMP !
Old May 21, 2011 | 06:50 PM
  #63  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Bump !
Engine and tranny out, as well as other parts, see the OP.
Old May 22, 2011 | 04:10 PM
  #64  
LongIslandMax's Avatar
Senior Member
iTrader: (3)
 
Joined: Feb 2009
Posts: 332
From: L.I. NY
do you have the bank 1 knock sensor and harness?
Old May 24, 2011 | 05:29 PM
  #65  
ofsalesmen's Avatar
Member
iTrader: (2)
 
Joined: May 2009
Posts: 88
From: Raleigh, NC
I need both rear window switches (the actual black switch assembly with the white harness connection on the bottom), shipped to 27616. I can send a pic if necessary. Thanks.
Old May 24, 2011 | 07:39 PM
  #66  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by LongIslandMax
do you have the bank 1 knock sensor and harness?
Engine has pending sale, I'm trying to take off as little as possible on it to make it easier for the buyer. Sorry.

Originally Posted by ofsalesmen
I need both rear window switches (the actual black switch assembly with the white harness connection on the bottom), shipped to 27616. I can send a pic if necessary. Thanks.
If you want to send a pic by pm, or txt, sure. I'm pretty sure we are both thinking about the same piece though. Not the trim piece that fits into the door, just the electric window. 45$ shipped for both, let me know.
paypal : viper_69_er@hotmail.com

Just for reference, this ? first one up top :
http://www.racepages.com/parts/windo...an/maxima.html
Old May 25, 2011 | 07:45 PM
  #67  
VQ'ed's Avatar
Senior Member
iTrader: (2)
 
Joined: Dec 2006
Posts: 480
From: Canada, Brossard
Salut Franky, je suis habituellement sur npclub.com. Je suis ici depuis un bout mais je ne savais pas qu'il y avait des membres du Québec souvent ici... J'aurais besoin de l'ECU moteur de l'auto et du crankshaft sensor en avant de la transmission. Tu peux me repondre par PM. Je suis un acheteur sérieux. Merci!
Old May 26, 2011 | 06:31 AM
  #68  
Shift_Max's Avatar
Senior Member
iTrader: (18)
 
Joined: Dec 2009
Posts: 1,031
From: NOVA
PM sent to you frank. thanks.
Old May 26, 2011 | 06:42 AM
  #69  
WhoDatBuuL's Avatar
Supporting Maxima.org Member
iTrader: (13)
 
Joined: Sep 2007
Posts: 1,019
From: Phila.
hey i seen that u was sellin the bose woofer , any chance you still have the rear deck ?
Old May 26, 2011 | 08:04 AM
  #70  
sud123's Avatar
Junior Member
 
Joined: Nov 2010
Posts: 89
From: Houston, TX
do you still have the shifter trim piece?
Old May 26, 2011 | 08:48 AM
  #71  
nismoSEXIMA's Avatar
Senior Member
iTrader: (4)
 
Joined: Dec 2008
Posts: 1,762
From: your moms bed
how much for the transmission....both axles....the starter...the leather... driver side transmission mount...and gauge cluster...??

shipped to 02721

Last edited by nismoSEXIMA; May 26, 2011 at 08:50 AM.
Old May 26, 2011 | 07:45 PM
  #72  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by VQ'ed
Salut Franky, je suis habituellement sur npclub.com. Je suis ici depuis un bout mais je ne savais pas qu'il y avait des membres du Québec souvent ici... J'aurais besoin de l'ECU moteur de l'auto et du crankshaft sensor en avant de la transmission. Tu peux me repondre par PM. Je suis un acheteur sérieux. Merci!
Salut Luc ! je connais ton nom des discussions sur le club, lol. Malheureusement l'ECU est vendu, j'attends de savoir si le gars veut le moteur aussi, pas certain pour le moteur car il en a un mais il va peut-etre le prendre dépendamment du shipping, mais il a l'air a s'en foutre des couts, tk ,ya du cash on dirait. Jte laisse savoir si le moteur vends pas.

Originally Posted by Shift_Max
PM sent to you frank. thanks.
replied !

Originally Posted by WhoDatBuuL
hey i seen that u was sellin the bose woofer , any chance you still have the rear deck ?
It's one of the very few last parts still in the car right now, woofer and amp are pretty much sold. I can send a pic if you want and have it shipped by next week. 30 $ shipped. Let me know by pm or txt (cell phone in OP)

Originally Posted by sud123
do you still have the shifter trim piece?
Nope sorry. Check first post / SOLD list

Originally Posted by nismoSEXIMA
how much for the transmission....both axles....the starter...the leather... driver side transmission mount...and gauge cluster...??

shipped to 02721
Pm sent !
Old May 28, 2011 | 05:28 PM
  #73  
T_Behr904's Avatar
Senior Member
 
Joined: Sep 2010
Posts: 10,344
From: Jacksonville, FL
Do you have a carpeted trunk mat? If so how much shipped to 32256? Thanks!
Old May 29, 2011 | 04:38 PM
  #74  
maxximaa's Avatar
Senior Member
iTrader: (10)
 
Joined: Mar 2006
Posts: 847
From: MB, Canada
How much are the fog lights? Are they OEM? Im from Winnipeg. Thanks.
Old May 29, 2011 | 07:20 PM
  #75  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by T_Behr904
Do you have a carpeted trunk mat? If so how much shipped to 32256? Thanks!
Yes, I got it, but I need to give it a good vacuum and wash. 2 cases of 24 budweiser were wasted on it, lolll.

Originally Posted by maxximaa
How much are the fog lights? Are they OEM? Im from Winnipeg. Thanks.
The fog lights are for the 5th gen, not a 5.5, the org member that sold it to me didnt have pictures and he didnt tell me it was for 00-01.... only said A33 fog lights, should have specified A33b.
Old May 29, 2011 | 07:25 PM
  #76  
T_Behr904's Avatar
Senior Member
 
Joined: Sep 2010
Posts: 10,344
From: Jacksonville, FL
Originally Posted by FrankA33
Yes, I got it, but I need to give it a good vacuum and wash. 2 cases of 24 budweiser were wasted on it, lolll.
That sucks! So sad to hear good alcohol not having the chance to fulfill it's destiny BTW what color is the trunk carpet?
Old May 29, 2011 | 07:43 PM
  #77  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by T_Behr904
That sucks! So sad to hear good alcohol not having the chance to fulfill it's destiny BTW what color is the trunk carpet?
Black interior, I'll put up pics and prices of all carpets when I get time this week.
Old May 29, 2011 | 08:08 PM
  #78  
T_Behr904's Avatar
Senior Member
 
Joined: Sep 2010
Posts: 10,344
From: Jacksonville, FL
Originally Posted by FrankA33
Black interior, I'll put up pics and prices of all carpets when I get time this week.
Ok sounds good to me
Old May 30, 2011 | 07:40 AM
  #79  
VQ'ed's Avatar
Senior Member
iTrader: (2)
 
Joined: Dec 2006
Posts: 480
From: Canada, Brossard
Fran, je descendrais a Quebec dans 2 fin de semaines, je prendrais quelques trucs dessus pour completer le miens. Le radio Bose, les deux o2 sensor secondaires, le crank sensor du devant du moteur, si il te reste des trims interieures noires comme le plafond, les montants piliers A, B, C noir, la tablette en arriere des sieges arrieres noirs. Donne moi ton num de téléphone, on va se prévoir une rencontre.
Old May 31, 2011 | 05:12 AM
  #80  
FrankA33's Avatar
Thread Starter
Senior Member
iTrader: (15)
 
Joined: Jan 2010
Posts: 463
From: Quebec
Originally Posted by VQ'ed
Fran, je descendrais a Quebec dans 2 fin de semaines, je prendrais quelques trucs dessus pour completer le miens. Le radio Bose, les deux o2 sensor secondaires, le crank sensor du devant du moteur, si il te reste des trims interieures noires comme le plafond, les montants piliers A, B, C noir, la tablette en arriere des sieges arrieres noirs. Donne moi ton num de téléphone, on va se prévoir une rencontre.
Pm sent pour toutes ces pieces la

Thread Tools
Search this Thread

All times are GMT -7. The time now is 10:12 AM.