What you see is what you get.. This kit requires the use of the ribbed coupler before the throttle body, as well as the rubber piece on the back end of the maf sensor for use with a 3.5"-3" coupler as seen in the pics (a 3"-3" coupler could be substituted in place of re-using those stock parts)..

The kit is 3" throughout with a 3" inverted cone filter from K&N (an $80 filter!) to cap it off.. This intake was slightly modified to accomodate the NWP Spacer kit and will require minimal effort to be modified to a stock intake manifold setup. There is heat wrap on all of the aluminum piping which helps this intake stay cold up in most temperatures and about skin temperature in hot weather conditions.

The intake was used for under 7k miles and is in perfect working order. As of now the filter has not been cleaned or "recharged" because some people prefer to do this themselves, however, the filter can be cleaned and re-oiled to new condition at no extra charge.

The setup includes:




This entire kit is $130 shipped (within the lower 48).. priced to go

 

edited, price dropped, bumped

 

Is this an Injen?

 

its not an injen, but its exactly like it as far as the piping goes.. the inverted cone filter gives the filter more surface area for an increase in airflow which is the only difference from the injen, besides the look

 

bump

 

I want this gone, I need the money for other things... Price is dropped to $130 shipped Continental U.S.