CA 5th Gen SE Cluster, Gauges, Bezel, Other Stuff
5th Gen SE Cluster, Gauges, Bezel, Other Stuff
Selling the following:
UPDATE: I really want to get rid of this stuff.
MAKE OFFERS - NO REASONABLE OFFER REFUSED!
STILL AVAILABLE:
1) '00 - early '01 SE Gauges (no cluster housing, just motors & faces with needles): $30 Shipped.
2) Brushed Stainless Steel gauge Bezel/Trim: $25 Shipped
3) 1 pair OEM fog lights - 7/10 condition, includes stalk w/ fog light ring switch & relay: $65 shipped
4) 1 pair aftermarket JDM style fog lights with wiring harness & lighted switch - 9/10 condition: $65 shipped
5) Turn Signal Stalk WITHOUT for light switch: $15 shipped. Free if you buy something else (other than Item 11) and want it.
6) HID Bi-Xenon Relay Harness (Microcontroller Type) New. $15 shipped.
SOLD/GONE:
'00 - SE Gauge Cluster: GONE - BACK TO THE BONEYARD
GXE Gauge Cluster (black faces): GONE
'00 -'01 mudflaps, QT1 (white): SOLD
'00 - '01 Red Taillights: SOLD
Stock covers for the fog light holes I pulled off my car. SOLD.
Here's the story:
Item 1:
Bought them from a fellow 'orger with the intent of hacking up my cluster and implanting the gauge faces. Fortunately, I obtained the proper SE cluster for my car. Again, selling them for what I paid and I'll cover shipping.
Gauge Faces with Motors:
Item 2:
I wasn't able to use it on my new SE cluster because the cluster has molded-in rings around the speedo and tach. this bezel insert only works on bezels without raised rings practicallly all others - it's brand new (installed & removed within a couple days of each other). Bought for $26, selling for $25 shipped.
Item 2 (installed):
Item 3: OEM fog lights, signal stalk with fog light switch and blue relay for engine compartment. Bought the lights here from a fellow 'orger, but got my hands on another set before I received them. Lenses in fair condition, pigtails missing. I have both lights, but just had one on hand for a pic (other at my house). I was at the boneyard the yesterday and found the stalk & relay so I grabbed them to put a complete set for whoever needs it. (pic of only one, but I have both with stalk & relay):
Item 4: these are aftermarket, JDM-style fog lights (no shield over bulb). I used them for about 2-3 months and pulled them because I went with HID's and since these don't have shields, I went with OEM's. Very good condition, but when I had my bumpers touched up, they got a little overspray on the edges from not being masked very well. Main part of lens clean, and overspray can be cleaned up fairly easily. Includes harness and lighted switch that fits plug&play in any of the available blanks on the dash.
(wiring harness & lighted switch included):
Item 5: Stock turn signal stalk I pulled from my car. This is the one with NO fog light switch.
(NO fog light switch):
Item 6: HID Bi-Xenon Relay Harness (Microcontroller Type): Brand-new. I received it as a warranty replacement but prior to arriving, I bought a different style harness. Can be used to control bixenon solenoid, low beam/high beam, or both with a splice.
(bixenon relay harness):
UPDATE: I really want to get rid of this stuff.
MAKE OFFERS - NO REASONABLE OFFER REFUSED!
STILL AVAILABLE:
1) '00 - early '01 SE Gauges (no cluster housing, just motors & faces with needles): $30 Shipped.
2) Brushed Stainless Steel gauge Bezel/Trim: $25 Shipped
3) 1 pair OEM fog lights - 7/10 condition, includes stalk w/ fog light ring switch & relay: $65 shipped
4) 1 pair aftermarket JDM style fog lights with wiring harness & lighted switch - 9/10 condition: $65 shipped
5) Turn Signal Stalk WITHOUT for light switch: $15 shipped. Free if you buy something else (other than Item 11) and want it.
6) HID Bi-Xenon Relay Harness (Microcontroller Type) New. $15 shipped.
SOLD/GONE:
'00 - SE Gauge Cluster: GONE - BACK TO THE BONEYARD
GXE Gauge Cluster (black faces): GONE
'00 -'01 mudflaps, QT1 (white): SOLD
'00 - '01 Red Taillights: SOLD
Stock covers for the fog light holes I pulled off my car. SOLD.
Here's the story:
Item 1:
Bought them from a fellow 'orger with the intent of hacking up my cluster and implanting the gauge faces. Fortunately, I obtained the proper SE cluster for my car. Again, selling them for what I paid and I'll cover shipping.
Gauge Faces with Motors:
Item 2:
I wasn't able to use it on my new SE cluster because the cluster has molded-in rings around the speedo and tach. this bezel insert only works on bezels without raised rings practicallly all others - it's brand new (installed & removed within a couple days of each other). Bought for $26, selling for $25 shipped.
Item 2 (installed):
Item 3: OEM fog lights, signal stalk with fog light switch and blue relay for engine compartment. Bought the lights here from a fellow 'orger, but got my hands on another set before I received them. Lenses in fair condition, pigtails missing. I have both lights, but just had one on hand for a pic (other at my house). I was at the boneyard the yesterday and found the stalk & relay so I grabbed them to put a complete set for whoever needs it. (pic of only one, but I have both with stalk & relay):
Item 4: these are aftermarket, JDM-style fog lights (no shield over bulb). I used them for about 2-3 months and pulled them because I went with HID's and since these don't have shields, I went with OEM's. Very good condition, but when I had my bumpers touched up, they got a little overspray on the edges from not being masked very well. Main part of lens clean, and overspray can be cleaned up fairly easily. Includes harness and lighted switch that fits plug&play in any of the available blanks on the dash.
(wiring harness & lighted switch included):
Item 5: Stock turn signal stalk I pulled from my car. This is the one with NO fog light switch.
(NO fog light switch):
Item 6: HID Bi-Xenon Relay Harness (Microcontroller Type): Brand-new. I received it as a warranty replacement but prior to arriving, I bought a different style harness. Can be used to control bixenon solenoid, low beam/high beam, or both with a splice.
(bixenon relay harness):
Last edited by EuroDriver; Apr 13, 2012 at 10:42 AM.
are those motors for the gauges basically plug and play? my speedo stopped working and I changed the VSS but speedo still dead. works once in a blue moon, and odometer only adds on miles when speedo is working.
*edit* the above is true only if you can see 2 small screws on your gauge faces. Gauge motors are integrated on the late'01 clusters and cannot be individually replaced (see above pics for the 2 trypes: the white ones are replaceable, the style like the black one are not).
Last edited by EuroDriver; Mar 27, 2012 at 03:03 PM.
*bUmP*
SE cluster going back for credit today - last chance if anyone wants it...
Mudflaps gone
late '01 cluster gone
Added fog lights
SE cluster going back for credit today - last chance if anyone wants it...
Mudflaps gone
late '01 cluster gone
Added fog lights
Last edited by EuroDriver; Mar 30, 2012 at 06:32 AM.
I'll try to get them up tonight.
Yeah, looks really nice installed - I'm bummed it didn't fit my new cluster. BTW, it's not chrome, it's brushed stainless steel. My apologies, I confused the price with something else I got. The bezel is $25.00 Corrected above.
Yeah, looks really nice installed - I'm bummed it didn't fit my new cluster. BTW, it's not chrome, it's brushed stainless steel. My apologies, I confused the price with something else I got. The bezel is $25.00 Corrected above.
Last edited by EuroDriver; Apr 2, 2012 at 10:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post
MAXSE5SPD
General Maxima Discussion
33
Sep 17, 2022 04:00 AM
Max139617
5th Generation Classifieds (2000-2003)
1
Sep 6, 2015 06:02 PM