Where to begin, the time has come, I'm in college, and am no longer willing to invest into my project anymore. Time to part out to pay for school.

315NA WHP video.


Was a 2003 VQ Block.
Engine :

Short Block
New 11.1 96MM Wiseco Pistons
New Eagle Rods
New ARP Rod Bolts
Engine Bore/Hone/Balancing and machine work for HR Headgasket compatibility made at South Florida Crank in Lake Worth.
New ARP Mains + Revvup Oil Pump
New ACL Main/Rod Race Bearings Installed
Here is a link to the coolant upgrade for the HR Headgasket to be used.

http://www.jimwolftechnology.com/wol...HEAD_BOLTS.pdf

I paid about 3800$ for the parts machine work and block, the machine work is quality work and I have videos of the car dyno at 300WHP NA and 320WHP NA with no problems. I've only placed around 400 miles on the car because I've always had a daily. Right now got my 92' Corolla. Anyway, price is $2800 for an NA built bottom end.




Heads: Selling the L19 Headstuds as shown above, for 350$ shipped.

Engine :
320CFM Port and Polished Head, JWT Valvesprings. Again made 300whp. Valve springs. Flowbenched and made 320CFM. JWT C9 Camshaft. SOLD HEADS

Intake :
Jenvey Individual Throttle Body
Cost around 3000$ Selling for $2350, taking a big loss on this setup but with them I made 320whp NA.

Engine Management:
Pro48 ECU + Harness and Adaptor. $1600 Shipped.

Fuel Management :
E85 Setup with Fuel Surge Tank

Have the ethanol gauge and everything.


My name is Kevin and I will post videos and pictures. Contact is 954-479-7478 and e-mail is kgkeen101@gmail.com I am located in Orlando 32817. I have not included shipping with the costs because I know the heads and block are big so I'd like to get a quote before I find out I'm overspending on shipping and taking a loss. Hope that sounds reasonable.

 

One of the few Serious FWD Vq's out there! Sucks to see a partout!

 

Do you have JWT c2 or c9 cams? the 315 hp video says c2.

 

Correct the 315WHP was made on C2, never finished the C9 testing for power. =/

 

did you take apart the motor yet?

 

Cattman headers ? if so quote to h9h 1a3 in Canada. Thanks !

 

Not yet no.

 

Nah long tube headers welded to 2.5in y pipe and 3in out the back.

 

holy **** this makes me want to take out another loan just to buy all this...fml free bump bro

 

Do you have any pics of the headers?

 

Sure I can post pictures of the weld job of the headers.

 

 

Again the main thing is that they are custom made with a 2.5in Y-pipe- 3in out the back with a Borla tip, all custom made piece by piece

 

I am actually still contemplating fixing the ride cause the valve lash is all off and that is the main thing that needs to be fixed. Just wish I had the time and money to work on the ride still.

 

Bump for NA bottom end, built heads, cams, revs to 8000RPM

 

Thanks for the pics, same headers I'm running.

 

ProEFI ECU SOLD! Engine, heads, camshafts all still for sale!

 

As well as the Jenvey Intake, much much more will become available stay tuned.

 

Pro48 ECU with the full engine harness ready to be dropped in is for sale now! Also selling 525cc Injectors with clips for 325 shipped.

BUMP FOR NA Parts, Block, Heads, Cams C9 JWT, Jenvey Intake! PM me for anything you may need!

 

Standalone with plug and play harness, ITB, tons of performance for NA Bump! PM with details on anything interested in!

 

How much for the custom made headers? Wonder what this would do for my vq35...

I am assuming fitment should be very similar since its FWD. I would probably have to make a custom y-pipe?

 

HEADS SOLD! BUMP for ITBs, BUMP PROEFI Pro48 Standalone + HARNESS PLUG AND PLAY 1800$, BUMP for NA High Compression Small Block, 2800$ with all listed parts included. Contact with offers, no low *****, you see the prices I paid for the equipment, if it meets your criteria contact me.

 

If you don't need the revvup oil pump, will resell and discount the small block price. In pictures are the L19 Head Studs, but I have a buyer so unless that falls through they are for sale too, new pics here.

 

Will PM about the exhaust, gota take pictures etc., if still interested

 

Bump for Small block

 

Anything yet on the exhaust? I am gauging interest depending on the price...

 

I'll be back down there cause I'm working on the car converting a 1.8L into it, will have the exhaust and more pictures up by Friday.

 

Small block sold. ITB Bump for Serious NA Enthusiasts!

 

Small block still available High Compression build all balanced and ready to go. ITB still ready to go, have a few inquiries but want it to go to someone who wants to make huge power.

Here is a link to Sash's success on the same ITB kit I have for sale. 372WHP.
http://www.sg-motorsport.com/?p=1088

Check out the thread, PM me with any questions, thanks!

 

Got the exhaust all out, sorry about the delay been pretty busy with lots of things going on. Here are photos, shipping sounds pricey to AZ though.

 

I am in no particular rush. Nice pictures!! Now that I think about it pricing will be a bit high for shipping.

Now I am not an exhaust expert but I think the exhaust wont line up after the resonator unless you would know for sure...

Anyways, I sent you a pm about the headers.

 

what did you do with your stock throttle body?

itbs would be a hilarious way to fix my nonworking tb but lame

 

Standalone and everything sold. Close thread.