5th Generation Classifieds (2000-2003) Buy, sell, trade parts for 2000-2003 Maximas

IL Parting out - 2003 Maxima SE - Chicagoland

Thread Tools
 
Search this Thread
 
Old Jan 28, 2014 | 07:57 AM
  #1  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Parting out - 2003 Maxima SE - Chicagoland

Parting out my 2003 Nissan Maxima SE

Available components include :

2003 VQ35DE Engine – 108,000 original miles
Transmission with 108,000 original miles

Many of the suspension parts were replaced in the summer of 2013. These include :

4 Monroe Ready-Struts (strut replacements w/coil springs)
4 Disk Rotors
4 Calipers

Both front control arms with ball joints

Steering rack

Inner & outer tie rods

Body panels available : Exterior : Dark Gray

Drivers side front door
Drivers side rear door

All glass panels including sunroof are intact and undamaged

Drivers side headlight – slightly damanged, still works – 2003 Xenon headlight
Tail lights

Spoiler

All interior parts (Light gray cloth seats) are undamaged & still available...

NO stock stereo or speakers/
Old Jan 28, 2014 | 08:09 AM
  #2  
DjHackStyle's Avatar
Senior Member
 
Joined: Feb 2012
Posts: 972
From: Bronx, NY
Driver side rear sidemarker (red) shipped to 10024
Old Jan 28, 2014 | 09:46 AM
  #3  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Originally Posted by DjHackStyle
Driver side rear sidemarker (red) shipped to 10024
$10 + shipping(5.00) - please email me directly at martyn.ja@gmail.com
Old Jan 28, 2014 | 11:56 AM
  #4  
AEKnight's Avatar
Member
 
Joined: Sep 2013
Posts: 194
Originally Posted by martynja
Parting out my 2003 Nissan Maxima SE

Available components include :

2003 VQ35DE Engine – 108,000 original miles
Transmission with 108,000 original miles

Many of the suspension parts were replaced in the summer of 2013. These include :

4 Monroe Ready-Struts (strut replacements w/coil springs)
4 Disk Rotors
4 Calipers

Both front control arms with ball joints

Steering rack

Inner & outer tie rods

Body panels available : Exterior : Dark Gray

Drivers side front door
Drivers side rear door

All glass panels including sunroof are intact and undamaged

Drivers side headlight – slightly damanged, still works – 2003 Xenon headlight
Tail lights

Spoiler

All interior parts (Light gray cloth seats) are undamaged & still available...

NO stock stereo or speakers/
How much for motor? By any chance is it a 6speed?
Old Jan 28, 2014 | 01:09 PM
  #5  
King_Ten_Ahead's Avatar
Senior Member
iTrader: (2)
 
Joined: Dec 2013
Posts: 684
From: Indiana
Front bumper cover and grille, picked up
Old Jan 28, 2014 | 06:42 PM
  #6  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Front Bumper & Grille

The front end is the part of the car that was damaged the most. The bumper cover & grille were BRAND NEW, just installed the day before the accident. Though the bumper cover is toast (aka: not all there), the new, chrome-plated grille was untouched. It is available for $75. It has only 1 day of use. A really bad day, but only 1 day.
Old Jan 28, 2014 | 06:45 PM
  #7  
King_Ten_Ahead's Avatar
Senior Member
iTrader: (2)
 
Joined: Dec 2013
Posts: 684
From: Indiana
Originally Posted by martynja
The front end is the part of the car that was damaged the most. The bumper cover & grille were BRAND NEW, just installed the day before the accident. Though the bumper cover is toast (aka: not all there), the new, chrome-plated grille was untouched. It is available for $75. It has only 1 day of use. A really bad day, but only 1 day.

Sorry I misread your post-_- I could get an aftermarket for less so unfortunately I cant do $75. Glad you're okay and glws.
Old Jan 28, 2014 | 06:46 PM
  #8  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Maxima Engine

I'm asking $1,250 + shipping for the engine. It just flipped 100,000 a few months back with absolutely no problems at all.

This car has an AUTOMATIC TRANSMISSION, for those that have asked.

My apologies for not making that more clear.
Old Jan 28, 2014 | 09:55 PM
  #9  
Govols83's Avatar
Member
iTrader: (5)
 
Joined: Feb 2009
Posts: 246
From: Knoxville,TN
dibs on the front mud flaps. how much shipped to 37918? paypal ready
Old Jan 28, 2014 | 10:31 PM
  #10  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Originally Posted by Govols83
dibs on the front mud flaps. how much shipped to 37918? paypal ready
I'm sorry - no mudflaps on the car. It does, however have very sharp rocker-panel moulding that spans the entire space between the front & rear wheels.
Old Jan 29, 2014 | 05:51 AM
  #11  
Mattx's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2013
Posts: 736
From: Pemberton, N.J.
How much for tranny? It's a vlsd or no?
Old Jan 29, 2014 | 06:35 AM
  #12  
iotashan's Avatar
Newbie - Just Registered
 
Joined: Dec 2013
Posts: 2
What about rims? Would pick up (WI).

Also interested in:
Muffler
Fog Lamps


Sorry if I misunderstood, and if it's not listed it's not available.

Last edited by iotashan; Jan 29, 2014 at 06:37 AM.
Old Jan 29, 2014 | 07:30 AM
  #13  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
I do not know whether it is (V)ariable (L)imited (S)lip (D)ifferential, though my guess is, probably not. If you can tell me how to check, I would be happy to.

It has approximately 107,000 miles on it.
Old Jan 29, 2014 | 07:35 AM
  #14  
om4r's Avatar
Senior Member
iTrader: (32)
 
Joined: Jun 2011
Posts: 303
From: Springfield, MA
02-03 would be Helical (hlsd) if it indeed is. Under your hood, there is a plate on the firewall, that would identify your transmission
Old Jan 29, 2014 | 07:37 AM
  #15  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Originally Posted by iotashan
What about rims? Would pick up (WI).

Also interested in:
Muffler
Fog Lamps


Sorry if I misunderstood, and if it's not listed it's not available.
The rims are $40 each.
The muffler is also $40.
The fog lamps are not available.
Old Jan 29, 2014 | 07:37 AM
  #16  
02whitemaximase's Avatar
Senior Member
iTrader: (38)
 
Joined: Mar 2011
Posts: 1,077
From: Jacksonville, FL
Originally Posted by martynja
I'm asking $1,250 + shipping for the engine. It just flipped 100,000 a few months back with absolutely no problems at all.

This car has an AUTOMATIC TRANSMISSION, for those that have asked.

My apologies for not making that more clear.
Already stated to be auto.
Old Jan 29, 2014 | 07:38 AM
  #17  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Originally Posted by om4r
02-03 would be Helical (hlsd) if it indeed is. Under your hood, there is a plate on the firewall, that would identify your transmission
I will be pulling parts off of the car today, and will check & get back to you later today.
Old Jan 29, 2014 | 10:29 AM
  #18  
tahoebigah's Avatar
Newbie - Just Registered
 
Joined: Jul 2009
Posts: 1
From: TN
Do you have the gas door? if so how much to 37388?
Old Jan 29, 2014 | 08:01 PM
  #19  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Originally Posted by tahoebigah
Do you have the gas door? if so how much to 37388?
Yes, I do have the fuel door - it is in good condition (wasn't damaged at all in the accident)

I'm asking $20.00 for it. It will cost $5.25 to ship it via USPS Priority Mail.

Please contact me directly at martyn.ja@gmail.com if you would like to move forward on this item.

Thank you -
Old Jan 30, 2014 | 03:16 AM
  #20  
om4r's Avatar
Senior Member
iTrader: (32)
 
Joined: Jun 2011
Posts: 303
From: Springfield, MA
Is the interior black? I'm in need of the cup holder with lid (not the insert). If it is black, how much shipped to 01109?
Old Jan 30, 2014 | 11:20 AM
  #21  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Originally Posted by om4r
Is the interior black? I'm in need of the cup holder with lid (not the insert). If it is black, how much shipped to 01109?
The interior is light gray - sorry.
Old Jan 30, 2014 | 03:54 PM
  #22  
SicOne's Avatar
Junior Member
 
Joined: Aug 2013
Posts: 37
From: Minnesota
im looking for just the temp selector on a manual hvac unit. (the slider) have it or want to split from the unit?
Old Jan 30, 2014 | 03:56 PM
  #23  
03maxdriven's Avatar
Member
 
Joined: Mar 2010
Posts: 214
From: I stay in GOOD OLD CALI (LA)
How much for the pop up center console mine is broken ...pic by any chance and shipped to 90201?
Old Jan 30, 2014 | 04:43 PM
  #24  
SEmy2K2go's Avatar
Go BUCKS!!!
iTrader: (10)
 
Joined: Aug 2003
Posts: 9,557
From: Delaware, OH-IO
Evap canister & valve to 43230 please.

Last edited by SEmy2K2go; Jan 30, 2014 at 05:15 PM.
Old Jan 31, 2014 | 04:25 PM
  #25  
2kayznmaxima's Avatar
Senior Member
iTrader: (18)
 
Joined: Jul 2004
Posts: 1,432
From: Middlesex, NJ
How much for the throttle body connector?
Old Jan 31, 2014 | 10:09 PM
  #26  
andi398's Avatar
Member
 
Joined: Nov 2010
Posts: 114
Can you cut the wire harness from the headlights? And maybe if you have bulbs or ballasts?
Old Feb 1, 2014 | 02:02 PM
  #27  
nycspudz03's Avatar
Supporting Maxima.org Member
iTrader: (2)
 
Joined: Sep 2003
Posts: 826
auto climate control? If so, How much for the blower motor resistor?
Old Feb 2, 2014 | 06:59 AM
  #28  
SEmy2K2go's Avatar
Go BUCKS!!!
iTrader: (10)
 
Joined: Aug 2003
Posts: 9,557
From: Delaware, OH-IO
PM replied to. Awaiting photos & pricing for evap parts.
Old Feb 3, 2014 | 04:26 PM
  #29  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Originally Posted by 2kayznmaxima
How much for the throttle body connector?
Throttle body connector? I'm not sure exactly what you mean - I'd be happy to sell it to you, I just don't know what to pull off of the car & send you.
Old Feb 3, 2014 | 08:50 PM
  #30  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Originally Posted by 2kayznmaxima
How much for the throttle body connector?
Ok - did a bit more research on the part - might it also be known as a "Throttle Body Elbow" also & run between the upper manifold & the upper intake manifold?
Old Feb 4, 2014 | 09:01 AM
  #31  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Originally Posted by SicOne
im looking for just the temp selector on a manual hvac unit. (the slider) have it or want to split from the unit?
I have the slider that you're looking for - Please e-mail me at martyn.ja@gmail.com if you are still interested in the one I have.
Old Feb 4, 2014 | 09:13 AM
  #32  
DjHackStyle's Avatar
Senior Member
 
Joined: Feb 2012
Posts: 972
From: Bronx, NY
Received the rear marker, thanks.
Old Feb 4, 2014 | 02:28 PM
  #33  
95VQ30's Avatar
Senior Member
 
Joined: Nov 2004
Posts: 605
From: St. Charles, MO
how is the front bumper cover and hood?
Old Feb 4, 2014 | 05:52 PM
  #34  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
1st off - NICE CAR!

Mine was just like it

Unfortunately, the front end took most of the damage. The bumper cover AND hood, which were only on the car for 2 days before the wreck, were completely destroyed.

** Note - Driver's side rear door & all window glass INCLUDING POWER MOON ROOF were completely undamaged in the wreck, and are still very available.

Last edited by martynja; Feb 4, 2014 at 05:58 PM. Reason: Didn't finish posting
Old Feb 6, 2014 | 09:39 AM
  #35  
SEmy2K2go's Avatar
Go BUCKS!!!
iTrader: (10)
 
Joined: Aug 2003
Posts: 9,557
From: Delaware, OH-IO
Payment sent for evap parts today.
Old Feb 6, 2014 | 12:18 PM
  #36  
Cameronn3712's Avatar
Junior Member
 
Joined: Dec 2013
Posts: 22
How much for spoiler and the two rear turn signal bulb sockets? And also what color is the spoiler?

Last edited by Cameronn3712; Feb 6, 2014 at 12:24 PM.
Old Feb 7, 2014 | 12:56 AM
  #37  
madd maxxx's Avatar
Newbie - Just Registered
 
Joined: Aug 2012
Posts: 8
From: Newark, NJ
Do u have the front window switches
Old Feb 7, 2014 | 12:57 AM
  #38  
madd maxxx's Avatar
Newbie - Just Registered
 
Joined: Aug 2012
Posts: 8
From: Newark, NJ
Do u have the front window switches auto up both
Old Feb 8, 2014 | 09:00 AM
  #39  
joshmachine's Avatar
Junior Member
 
Joined: Dec 2011
Posts: 42
From: Lansing MI
Hello John,
Got the parts yday and am at the mechanic putting it on.
He is really impressed with the quality and price for the part.
Thank you very much for the quick shipping and it was a great experience.
Thank you once again,
Rijosh
Old Feb 8, 2014 | 10:16 AM
  #40  
martynja's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Jul 2010
Posts: 46
From: Chicago, IL.
Originally Posted by joshmachine
Hello John,
Got the parts yday and am at the mechanic putting it on.
He is really impressed with the quality and price for the part.
Thank you very much for the quick shipping and it was a great experience.
Thank you once again,
Rijosh


My pleasure, Rijosh.
Enjoy the ride -
John



All times are GMT -7. The time now is 01:08 PM.