Intake Midpipes 3 Inch sizes- 5.5 Gen Introductory Price!
Hey Everyone!
The product has moved along into production phase! As of now, i only have 5.5 Gen pipes (5th gen with additional breather hoses in future batch) All prices are Shipped Anywhere Domestic US in a Flat Rate Priority Box. Shorty Mid-pipes Fit in a Padded Flat rate Envelope and should arrive safely. There are few variants of the product itself. Please Read the options available. All of these were designed with using the Stock length breather hose (6 inch long breather tube) All pieces eliminate the factory Airbox/Filter housing; Other needed items to complete installation needed are *MAF Adapter *Cone Filter of choice * 2 Couplers and 4 Clamps. Couplers & Clamps are avail for extra as well! Option A: 3 Inch Outer Diameter (.08 Wall thickness; 2mm) ~2.84 inches Inner Diameter; I.D = 72.xx MM. This is the size of the stock TB. * Shorty Mid-pipe (~3.5-3.75 inches) $30 Unfinished RAW aluminum 1? QTY $40 Satin Black Powder coated Finish 3 QTY *Standard Mid-Pipe (~6.5-6.75 inches) $45 Unfinished RAW aluminum 4 QTY $55 Satin Black Powder coated Finish 4 QTY Option B: ~3.25 Inch Outer Diameter (.12 Wall Thickness; 3mm) ~ 3 inches Inner Diameter; ID = 76.2 MM. This is IDEAL for anyone using 75mm NWP TB or larger. Couplers May need to Be heated and Stretched to Fit. Updated 06/12/15 * Standard Mid Pipe (~6.75-7 Inches) $ 65 Raw aluminum finish 3 inch ID intake midpipe. I did not get any units powder coated this time around. * Standard Mid Pipe (~6.75 Inches) $ 80 Satin Black Powder Coat Finish SOLD OUT for NOW in powder coat. + Add $18.50 to any order for an order of 2 3 inch couplers and 4 T clamps. I only have black couplers. 3.50 Inch couplers also here now [I]Additional Notes: Worth Reading[/I] *Filters Taller than approximately 6+ inches (from Mouth to End) may need Battery Relocated sideways. * Although All pieces are Deburred; Please Take Caution Handling them still. *Raw Aluminum Finish May have scuffs Present From Cutting/Storage and Welding Process. You can Paint it as you wish or leave it alone. * Welds are "Penny Laid" Some may think its sloppy? but its ideal for strength * Installation May require twisting the Breather hose in Engine Slightly Upwards * The 3 inch OD intake Fits directly on a Bpi Velocity Stack. Where as the ~3.25 inch OD intake will Fit OVER the stack...I will confirm the latter once i pickup the powdered units tomorrow) * Please visit the original Feeler thread below for some useful Information as well. https://maxima.org/forums/5th-genera...ease-read.html Pics: http://i59.tinypic.com/2w5ruk2.jpg Std midpipe http://i61.tinypic.com/fbm6vk.jpg Std Mocked up with MAF http://i59.tinypic.com/noh821.jpg Shorty http://i60.tinypic.com/6jqef7.jpg Shorty Mocked up with MAF http://i59.tinypic.com/epjb4n.jpg Shorty with a Maf adapter http://i58.tinypic.com/axmlqx.jpg Assembled with Shorty http://i57.tinypic.com/aexyyc.jpg Final Assembly of my Car as it is now- Shown with 3 ID @ 6.75 inches. Aem Dryflow; Bpi Velocity Stack With Ebay Maf adapter. Notice the end of Filter...I had to bend down that tab; it barely fits. http://i59.tinypic.com/fl9850.jpg Powder coated Units PICKED up YAY. Comparo sizes!! http://i59.tinypic.com/2iswjza.jpg http://i59.tinypic.com/24wy90o.jpg 3 Inch larger pipe literally fits over the other http://i58.tinypic.com/2e4kvpe.jpg Side by Side size comparo I did the mock ups in a hurry; Some tweaks may be necessary. Any Questions Please dont hesitate to ask me via PM or respond in Thread. :D In the future; I will have other colors available as well. I will also be working on 5th gen variants as well as MAF incorporated units in 3 inch ID size only. :) Let the Excitement Show! Payment via P/P sent to iceberg_sc@yahoo.com Shipped prices listed above with no additional fees Thanks to Everyone that has helped along the way! Please no Bashing in my Thread please. Any concerns PM me directly. Update: Im working on the integrated intake W Maf units as we speak. Few more tweaks to work out. |
MAF adapter ordered; as i didnt have the right one. Final assembly pics coming!
|
^^ Excuse my multiple color couplers and zip ties pipe. I will be fabbing a simple aluminum band to hold it upright and still. There you have it gang. Finished product.
Went on a drive as soon as i could....SCREAMS. is all i can say. My overly massive filter of choice and BPi velocity stack make it SCREAM. Like an angry mob of elephants in a stampede. "very trumpet" like in this setup. Howls. screams. blares. all words describe this at wot. At idle no difference. at normal driving minimal difference. Sorry Final assembly pic doesnt have my battery and all reassembled..Be patient when doing this. Things need time to be shifted around. |
Man I want this. It would go great with my Pop charger. Let's see how money is next Friday.
|
^^ You know what you have to do to get one :)
Powder coated units are FINAAAAAALLLLYY in hand. Pics posted. Comparo sizes there. Once i find the micrometer i will put measurements for the fanatics. The satin Black finish is absolutely BEAUTIFUL! Get your orders in now |
What are the gains compared to a 4" diameter intake?
|
^These are fine for majority of the members with stock set-ups. No need for retuning; or larger injectors; no larger maf housing needed.
These are replicated to the specs of old producers; this 4 inch hype is a a tad....new Despite all that; if ppl want 4 inch ill make 4 inch in the future. Im trying to create a product line here to cater to all levels of mods. |
Another Few units shipping today.
|
+ Add $18.50 to any order for an order of 2 3 inch couplers and 4 T clamps. I only have black couplers.
|
Another 3inch ID intake pending. Invoice sent.
PAID: Only 1 3 ID midpipe remains |
3 and 3.5 inch clamps received in hand. Couplers should be here soon.
Update: 10/1. 4 ply Black Couplers and clamps are in hand now ready to ship. With or without midpipe purchase. I have 3 and 3.25 inch on hand and T style clamps |
Integrated All in one Maf units/intake should be ready shortly as well.
|
Free Bonus "gift" i been working on with any midpipe Purchased next 48 hours.
|
Installed JWT popcharger with new midpipe courtesy of A33_ridah...the midpipe is a very well product I must say! Good luck with further sales in the future bro :highfive:
https://maxima.org/forums/picture.ph...ictureid=40763 https://maxima.org/forums/picture.ph...ictureid=40762 |
^^ Looking Good Brotha! how do you like the car now??
Im interested in seeing the other side of the jwt adapter...maybe send me a pic when u can |
3 inch ID sold out for now. New Batch going in soon.
|
I'll wait for the next batch, I get paid in 2 weeks :)
|
weld on maf bungs arrived in the mail today...all in ones coming soon in 3 ID soon for 5.5 gen first.
3.5, 4 inch also can be made if necessary. |
Take $5 (std midpipe only) if bought before sunday (10/19) @ midnight. Also Get the needed couplers/clamps for Additional $15 till then as well. PLUS ill toss 2 .org Decals includes as a bonus as well! Need to move these to move on to the next phases.
This is fine for most anyone that doesnt want to deal with re-tune. |
ttt'; prices lowered. Maf bungs dropped at shop for first batch integrated coming soon.
|
Doin research into intakes right now, (mostly for the sound inside the cabin, I admit :D) and I'm curious as to what the difference is between this midpipe and a normal CAI or SRI.
Also, I see the "mid" part of the midpipe, if it's that weird line coming out of the middle of the intake. What is that? I think someone threw the word vacuum hose around? Been trying to search on the org and all I see are people talking about some old "Frankencar" thing that no longer exists. If someone replys, thanks in advance! |
^^you have pm
|
ttt. Units are ready to ship out same or next day! Prices reduced.
|
Bumpin it
|
ttt
|
Interested in 5th Gen intake mid pipes. Let me know when they're available.
|
^Still in the works. Bumpinnnn
|
ttt
|
whats the gain on these? just more volume?
|
^Mid to Upper Range Gains Notable with this mod. Dynos of Frankencars/berk (similar to this midpipe) can be found here. All i have for you is my butt dyno and it dont lie :)
|
Bumpin'. Shippin some units tomorrow. Prices Dropped on std size :)
|
Any for the 5th gen?
|
are these compatible with the 4th gen? or does a new design have to be produced. Either way I'm interested in this mod. let me know. thanks
|
The wait is going to be over soon for the 3L crowd. thanks!
Originally Posted by lux97Max
(Post 9013809)
are these compatible with the 4th gen? or does a new design have to be produced. Either way I'm interested in this mod. let me know. thanks
|
I'm back... Lol whats the status on these Ridah?
|
^Majority of the 3L crowd wants just the midpipe right? not necessarily the built in maf like the 3.5 guys demand.
|
You have those built in Maf bung intakes in stock?
|
I have the maf bungs here in hand...but guys the current truth is..
I am facing financial ongoing challenges .... Im not sure how out of place it would be for me to ask for any pre-purchases. Even partial % amounts. By now; you have seen the existing product; it is a quality piece with all those that have it are happy. New 3l variation will be same quality plus the other changes long sought. Before it was the shop didnt have a chance to get to it; now i cant get to it immediately due to funds. Open to ideas. |
It's cool man. I just purchased one from another member. It is a Ridah intake so I'll keep you posted when I install it today
|
Bumpin'
|
All times are GMT -7. The time now is 04:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands