CA Intake Midpipes- 5.5 Gen Introductory Price!
09-18-2014, 10:13 AM
#1
Intake Midpipes 3 Inch sizes- 5.5 Gen Introductory Price!
Hey Everyone!
The product has moved along into production phase! As of now, i only have 5.5 Gen pipes (5th gen with additional breather hoses in future batch)
All prices are Shipped Anywhere Domestic US in a Flat Rate Priority Box. Shorty Mid-pipes Fit in a Padded Flat rate Envelope and should arrive safely.
There are few variants of the product itself. Please Read the options available.
All of these were designed with using the Stock length breather hose (6 inch long breather tube) All pieces eliminate the factory Airbox/Filter housing; Other needed items to complete installation needed are *MAF Adapter *Cone Filter of choice * 2 Couplers and 4 Clamps.
Couplers & Clamps are avail for extra as well!
Option A: 3 Inch Outer Diameter (.08 Wall thickness; 2mm) ~2.84 inches Inner Diameter; I.D = 72.xx MM. This is the size of the stock TB.
* Shorty Mid-pipe (~3.5-3.75 inches) $30 Unfinished RAW aluminum 1? QTY
$40 Satin Black Powder coated Finish 3 QTY
*Standard Mid-Pipe (~6.5-6.75 inches) $45 Unfinished RAW aluminum 4 QTY
$55 Satin Black Powder coated Finish 4 QTY
Option B: ~3.25 Inch Outer Diameter (.12 Wall Thickness; 3mm) ~ 3 inches Inner Diameter; ID = 76.2 MM.
This is IDEAL for anyone using 75mm NWP TB or larger. Couplers May need to Be heated and Stretched to Fit.
Updated 06/12/15 * Standard Mid Pipe (~6.75-7 Inches) $ 65 Raw aluminum finish 3 inch ID intake midpipe. I did not get any units powder coated this time around.
* Standard Mid Pipe (~6.75 Inches) $ 80 Satin Black Powder Coat Finish SOLD OUT for NOW in powder coat.
+ Add $18.50 to any order for an order of 2 3 inch couplers and 4 T clamps. I only have black couplers. 3.50 Inch couplers also here now
[I]Additional Notes: Worth Reading[/I]
*Filters Taller than approximately 6+ inches (from Mouth to End) may need Battery Relocated sideways.
* Although All pieces are Deburred; Please Take Caution Handling them still.
*Raw Aluminum Finish May have scuffs Present From Cutting/Storage and Welding Process. You can Paint it as you wish or leave it alone.
* Welds are "Penny Laid" Some may think its sloppy? but its ideal for strength
* Installation May require twisting the Breather hose in Engine Slightly Upwards
* The 3 inch OD intake Fits directly on a Bpi Velocity Stack. Where as the ~3.25 inch OD intake will Fit OVER the stack...I will confirm the latter once i pickup the powdered units tomorrow)
*
Please visit the original Feeler thread below for some useful Information as well.
https://maxima.org/forums/5th-genera...ease-read.html
Pics:
Std midpipe
Std Mocked up with MAF
Shorty
Shorty Mocked up with MAF
Shorty with a Maf adapter
Assembled with Shorty
Final Assembly of my Car as it is now- Shown with 3 ID @ 6.75 inches. Aem Dryflow; Bpi Velocity Stack With Ebay Maf adapter. Notice the end of Filter...I had to bend down that tab; it barely fits.
Powder coated Units PICKED up YAY. Comparo sizes!!
3 Inch larger pipe literally fits over the other
Side by Side size comparo
I did the mock ups in a hurry; Some tweaks may be necessary.
Any Questions Please dont hesitate to ask me via PM or respond in Thread.
In the future; I will have other colors available as well. I will also be working on 5th gen variants as well as MAF incorporated units in 3 inch ID size only.
Let the Excitement Show! Payment via P/P sent to iceberg_sc@yahoo.com Shipped prices listed above with no additional fees
Thanks to Everyone that has helped along the way! Please no Bashing in my Thread please. Any concerns PM me directly.
Update: Im working on the integrated intake W Maf units as we speak. Few more tweaks to work out.
The product has moved along into production phase! As of now, i only have 5.5 Gen pipes (5th gen with additional breather hoses in future batch)
All prices are Shipped Anywhere Domestic US in a Flat Rate Priority Box. Shorty Mid-pipes Fit in a Padded Flat rate Envelope and should arrive safely.
There are few variants of the product itself. Please Read the options available.
All of these were designed with using the Stock length breather hose (6 inch long breather tube) All pieces eliminate the factory Airbox/Filter housing; Other needed items to complete installation needed are *MAF Adapter *Cone Filter of choice * 2 Couplers and 4 Clamps.
Couplers & Clamps are avail for extra as well!
Option A: 3 Inch Outer Diameter (.08 Wall thickness; 2mm) ~2.84 inches Inner Diameter; I.D = 72.xx MM. This is the size of the stock TB.
* Shorty Mid-pipe (~3.5-3.75 inches) $30 Unfinished RAW aluminum 1? QTY
$40 Satin Black Powder coated Finish 3 QTY
*Standard Mid-Pipe (~6.5-6.75 inches) $45 Unfinished RAW aluminum 4 QTY
$55 Satin Black Powder coated Finish 4 QTY
Option B: ~3.25 Inch Outer Diameter (.12 Wall Thickness; 3mm) ~ 3 inches Inner Diameter; ID = 76.2 MM.
This is IDEAL for anyone using 75mm NWP TB or larger. Couplers May need to Be heated and Stretched to Fit.
Updated 06/12/15 * Standard Mid Pipe (~6.75-7 Inches) $ 65 Raw aluminum finish 3 inch ID intake midpipe. I did not get any units powder coated this time around.
* Standard Mid Pipe (~6.75 Inches) $ 80 Satin Black Powder Coat Finish SOLD OUT for NOW in powder coat.
+ Add $18.50 to any order for an order of 2 3 inch couplers and 4 T clamps. I only have black couplers. 3.50 Inch couplers also here now
[I]Additional Notes: Worth Reading[/I]
*Filters Taller than approximately 6+ inches (from Mouth to End) may need Battery Relocated sideways.
* Although All pieces are Deburred; Please Take Caution Handling them still.
*Raw Aluminum Finish May have scuffs Present From Cutting/Storage and Welding Process. You can Paint it as you wish or leave it alone.
* Welds are "Penny Laid" Some may think its sloppy? but its ideal for strength
* Installation May require twisting the Breather hose in Engine Slightly Upwards
* The 3 inch OD intake Fits directly on a Bpi Velocity Stack. Where as the ~3.25 inch OD intake will Fit OVER the stack...I will confirm the latter once i pickup the powdered units tomorrow)
*
Please visit the original Feeler thread below for some useful Information as well.
https://maxima.org/forums/5th-genera...ease-read.html
Pics:
Std midpipe Std Mocked up with MAF Shorty Shorty Mocked up with MAF Shorty with a Maf adapter Assembled with Shorty Final Assembly of my Car as it is now- Shown with 3 ID @ 6.75 inches. Aem Dryflow; Bpi Velocity Stack With Ebay Maf adapter. Notice the end of Filter...I had to bend down that tab; it barely fits. Powder coated Units PICKED up YAY. Comparo sizes!! 3 Inch larger pipe literally fits over the other Side by Side size comparoI did the mock ups in a hurry; Some tweaks may be necessary.
Any Questions Please dont hesitate to ask me via PM or respond in Thread.
In the future; I will have other colors available as well. I will also be working on 5th gen variants as well as MAF incorporated units in 3 inch ID size only.
Let the Excitement Show! Payment via P/P sent to iceberg_sc@yahoo.com Shipped prices listed above with no additional fees
Thanks to Everyone that has helped along the way! Please no Bashing in my Thread please. Any concerns PM me directly.
Update: Im working on the integrated intake W Maf units as we speak. Few more tweaks to work out.
Last edited by a33_ridah; 07-05-2015 at 10:22 PM. Reason: update qty
09-23-2014, 07:19 PM
#3
^^ Excuse my multiple color couplers and zip ties pipe. I will be fabbing a simple aluminum band to hold it upright and still. There you have it gang. Finished product.
Went on a drive as soon as i could....SCREAMS. is all i can say. My overly massive filter of choice and BPi velocity stack make it SCREAM. Like an angry mob of elephants in a stampede. "very trumpet" like in this setup. Howls. screams. blares. all words describe this at wot. At idle no difference. at normal driving minimal difference.
Sorry Final assembly pic doesnt have my battery and all reassembled..Be patient when doing this. Things need time to be shifted around.
Went on a drive as soon as i could....SCREAMS. is all i can say. My overly massive filter of choice and BPi velocity stack make it SCREAM. Like an angry mob of elephants in a stampede. "very trumpet" like in this setup. Howls. screams. blares. all words describe this at wot. At idle no difference. at normal driving minimal difference.
Sorry Final assembly pic doesnt have my battery and all reassembled..Be patient when doing this. Things need time to be shifted around.
09-24-2014, 07:32 PM
#5
^^ You know what you have to do to get one
Powder coated units are FINAAAAAALLLLYY in hand. Pics posted. Comparo sizes there. Once i find the micrometer i will put measurements for the fanatics.
The satin Black finish is absolutely BEAUTIFUL! Get your orders in now
Powder coated units are FINAAAAAALLLLYY in hand. Pics posted. Comparo sizes there. Once i find the micrometer i will put measurements for the fanatics.
The satin Black finish is absolutely BEAUTIFUL! Get your orders in now
09-25-2014, 09:29 AM
#7
^These are fine for majority of the members with stock set-ups. No need for retuning; or larger injectors; no larger maf housing needed.
These are replicated to the specs of old producers; this 4 inch hype is a a tad....new
Despite all that; if ppl want 4 inch ill make 4 inch in the future. Im trying to create a product line here to cater to all levels of mods.
These are replicated to the specs of old producers; this 4 inch hype is a a tad....new
Despite all that; if ppl want 4 inch ill make 4 inch in the future. Im trying to create a product line here to cater to all levels of mods.
09-30-2014, 12:05 PM
#11
3 and 3.5 inch clamps received in hand. Couplers should be here soon.
Update: 10/1. 4 ply Black Couplers and clamps are in hand now ready to ship. With or without midpipe purchase.
I have 3 and 3.25 inch on hand and T style clamps
Update: 10/1. 4 ply Black Couplers and clamps are in hand now ready to ship. With or without midpipe purchase.
I have 3 and 3.25 inch on hand and T style clamps
Last edited by a33_ridah; 10-01-2014 at 03:10 PM.
10-14-2014, 11:39 AM
#18
weld on maf bungs arrived in the mail today...all in ones coming soon in 3 ID soon for 5.5 gen first.
3.5, 4 inch also can be made if necessary.
3.5, 4 inch also can be made if necessary.
Last edited by a33_ridah; 10-14-2014 at 05:20 PM.
10-16-2014, 12:03 PM
#19
Take $5 (std midpipe only) if bought before sunday (10/19) @ midnight. Also Get the needed couplers/clamps for Additional $15 till then as well. PLUS ill toss 2 .org Decals includes as a bonus as well! Need to move these to move on to the next phases.
This is fine for most anyone that doesnt want to deal with re-tune.
This is fine for most anyone that doesnt want to deal with re-tune.
10-25-2014, 08:59 PM
#21
Doin research into intakes right now, (mostly for the sound inside the cabin, I admit ) and I'm curious as to what the difference is between this midpipe and a normal CAI or SRI.
Also, I see the "mid" part of the midpipe, if it's that weird line coming out of the middle of the intake. What is that? I think someone threw the word vacuum hose around?
Been trying to search on the org and all I see are people talking about some old "Frankencar" thing that no longer exists.
If someone replys, thanks in advance!
) and I'm curious as to what the difference is between this midpipe and a normal CAI or SRI.Also, I see the "mid" part of the midpipe, if it's that weird line coming out of the middle of the intake. What is that? I think someone threw the word vacuum hose around?
Been trying to search on the org and all I see are people talking about some old "Frankencar" thing that no longer exists.
If someone replys, thanks in advance!
01-10-2015, 10:53 AM
#34
01-29-2015, 01:18 AM
#38
I have the maf bungs here in hand...but guys the current truth is..
I am facing financial ongoing challenges ....
Im not sure how out of place it would be for me to ask for any pre-purchases. Even partial % amounts.
By now; you have seen the existing product; it is a quality piece with all those that have it are happy. New 3l variation will be same quality plus the other changes long sought.
Before it was the shop didnt have a chance to get to it; now i cant get to it immediately due to funds. Open to ideas.
I am facing financial ongoing challenges ....
Im not sure how out of place it would be for me to ask for any pre-purchases. Even partial % amounts.
By now; you have seen the existing product; it is a quality piece with all those that have it are happy. New 3l variation will be same quality plus the other changes long sought.
Before it was the shop didnt have a chance to get to it; now i cant get to it immediately due to funds. Open to ideas.