MD Brembo Caliper Brackets $165 shipped $175 Powdercoated
08-26-2015, 10:11 AM
#1
Brembo Caliper Brackets $165 shipped $175 Powdercoated
First and foremost, shout out to the originator Vas Samaloy for the innovation that went into initial sets of these. BREMBO BIG BRAKE KIT
As it stands I am offering a run of Brackets. I will be offering these at $165 instead of the old $200 pricetag. I will order as many sets as desired on this run, giving until 1 Sept for an initial deposit of $85. The brackets will be done within fourteen days following deposit. This is non refundable upon initiation.
Final $80 payment is due on 15Sep2015, upon full settling brackets will be priority mailed to members.
Powder coating will be made available to those interested for $10 in stock colors. Service will also be offered for calipers at a discounted rate for those involved in the buy.
In Stock Colors Are
Gold
Gloss Black
Satin Black
Illusion Malbec
Candy Green
Candy Blue
Adonized Red
Yellow
Chrome
Silver
White
Orange
Emerald Green
Again these will clear 17 inch wheels. Use 12.6 inch 6th gen rotors. Full aluminum with upgraded hardware. And are for evo 8 and 9 Calipers. Thanks for the support.
Send all questions. To cant.get.ryte@gmail.com if youre interested.
to quote vas
"As many of the members have seen on this forum, there is another option for a Big Brake Kit for the 5th gen and the 5.5 gen maxima.
This kit utilizes 4 Piston Brembo calipers from the Mitsubishi Evolution 8/9 with 6th gen maxima 12.6" rotors. A custom relocation bracket is made on a CNC machine using T6061 aluminium that bolts up to the 5th gen and 5.5 gen maxima knuckle. Stock maxima lines also bolt up the Brembo Caliper so the option of Stainless Steel Lines is also possible. As far as pads go, there are plenty of aftermarket pads that fit the Brembo caliper including Hawk HPS, Hp+, and other pads. No centerting rings are required since the kit using a Nissan Rotor.
Now I am trying to see if there is an interest from the maxima community for a production run of relocation brackets. The end-user will of course source the Brembo calipers from places like ebay or junkyards and etc. Pads and rotors can be bough from places like tirerack or even the group deal section of this forum.
As far as wheel clearance goes, 17" wheels are a required size with the appropriate offset/spoke design to clear the calipers."
As it stands I am offering a run of Brackets. I will be offering these at $165 instead of the old $200 pricetag. I will order as many sets as desired on this run, giving until 1 Sept for an initial deposit of $85. The brackets will be done within fourteen days following deposit. This is non refundable upon initiation.
Final $80 payment is due on 15Sep2015, upon full settling brackets will be priority mailed to members.
Powder coating will be made available to those interested for $10 in stock colors. Service will also be offered for calipers at a discounted rate for those involved in the buy.
In Stock Colors Are
Gold
Gloss Black
Satin Black
Illusion Malbec
Candy Green
Candy Blue
Adonized Red
Yellow
Chrome
Silver
White
Orange
Emerald Green
Again these will clear 17 inch wheels. Use 12.6 inch 6th gen rotors. Full aluminum with upgraded hardware. And are for evo 8 and 9 Calipers. Thanks for the support.
Send all questions. To cant.get.ryte@gmail.com if youre interested.
to quote vas
"As many of the members have seen on this forum, there is another option for a Big Brake Kit for the 5th gen and the 5.5 gen maxima.
This kit utilizes 4 Piston Brembo calipers from the Mitsubishi Evolution 8/9 with 6th gen maxima 12.6" rotors. A custom relocation bracket is made on a CNC machine using T6061 aluminium that bolts up to the 5th gen and 5.5 gen maxima knuckle. Stock maxima lines also bolt up the Brembo Caliper so the option of Stainless Steel Lines is also possible. As far as pads go, there are plenty of aftermarket pads that fit the Brembo caliper including Hawk HPS, Hp+, and other pads. No centerting rings are required since the kit using a Nissan Rotor.
Now I am trying to see if there is an interest from the maxima community for a production run of relocation brackets. The end-user will of course source the Brembo calipers from places like ebay or junkyards and etc. Pads and rotors can be bough from places like tirerack or even the group deal section of this forum.
As far as wheel clearance goes, 17" wheels are a required size with the appropriate offset/spoke design to clear the calipers."
Thread
Thread Starter
Forum
Replies
Last Post
Maxima_Joe
4th Generation Classifieds (1995-1999)
16
11-25-2015 08:19 AM
Maxima_Joe
4th Generation Classifieds (1995-1999)
3
10-15-2015 08:01 PM