5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Stereo Swap Out Question

Thread Tools
 
Search this Thread
 
Old Dec 19, 2000 | 09:26 AM
  #1  
punkdork's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 3,528
Has anyone replaced the "premium" deck that comes in the SE model? After Christmas I'm gonna pick up the Aiwa CDC-mp3. I've seen them on ebay for like 230ish and I love the idea of playing MP3s straight from my car stereo.

Anyway, any pics of the removal of the stock stero or service manual images would be highly appreciated.
Old Dec 19, 2000 | 11:12 AM
  #2  
PIONEER's Avatar
Senior Member
iTrader: (1)
 
Joined: Aug 2000
Posts: 1,686
From: Raleigh, NC
I don't have any pics, but its easy to remove
POP THE AC VENTS UP TOP
2 SCREWS BEHIND THE VENTS HOLDING TOP PART OF DASH
TAKE ASHTRAY OUT, SMALL SCREW BEHIND THE DUMMY TRAY IN ASHTRAY
POP THE TRIM AROUND THE SHIFTER
2 SCREWS UNDERSIDE HOLDING THE BOTTOM OF DASH.
Take THE TOP 2 AND BOTTOM 2 OUT AND PULL THE CENTER CONSOLE RIGHT OUT.

Don't scratch anything, the metal is really sharp on the dash so take it easy and don't cut yourself.
Old Dec 19, 2000 | 11:27 AM
  #3  
dvyuan
Guest
 
Posts: n/a
I did a swap too.. if you are going to a single DIN unit you can order a kit from http://www.crutchfield.com. They have one that fits pretty good. As for removal it is just as easy as PIONEER says. Just be careful when you pull the deck out it has brackets that are really sharp that can cut you and your car!
Old Dec 19, 2000 | 11:49 AM
  #4  
punkdork's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 3,528
Is the crutchfield any better or cheaper than the Nissan kit that is in the GXE? I want it to look good.
Old Dec 19, 2000 | 03:03 PM
  #5  
dvyuan
Guest
 
Posts: n/a
The Crutchfield one is about $20 bucks, I think someone on the board said the GXE kit comes with the vents too and it cost something in the hundred range. The crutchfield on is not bad at all.
Old Dec 19, 2000 | 03:31 PM
  #6  
punkdork's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 3,528
Anyone have pix of a crutchfield kit? Also, will one of the aluminum trim kits fit on either?
Old Dec 20, 2000 | 09:35 AM
  #7  
PIONEER's Avatar
Senior Member
iTrader: (1)
 
Joined: Aug 2000
Posts: 1,686
From: Raleigh, NC
crutchfield kit is $20 the Nissan Dash piece is $67 or so. comes with vents and all. Looks original.

Oh Just incase U call the dealer its called the GXE AC VENTILATOR ASSEMBLY (sp?)
<img src="http://www.geocities.com/nismorg/Maxima/Interior/MVC-634X.jpg">

[Edited by PIONEER on 12-20-2000 at 11:39 AM]
Old Dec 20, 2000 | 09:43 AM
  #8  
punkdork's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 3,528
Thanks pioneer, is that the Nissan Dash piece or the crutchfield?
Old Dec 20, 2000 | 09:45 AM
  #9  
PIONEER's Avatar
Senior Member
iTrader: (1)
 
Joined: Aug 2000
Posts: 1,686
From: Raleigh, NC
Originally posted by punkdork
Thanks pioneer, is that the Nissan Dash piece or the crutchfield?
Nissan, back then crutchfield didn't have 1.
<img src="http://www.geocities.com/nismorg/Maxima/Interior/MVC-636X.jpg">
Old Dec 20, 2000 | 09:54 AM
  #10  
punkdork's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 3,528
I think I'll spend the extra money to have the Nissan one. Since the stereo is a single din. Is the storage compartment thing an extra part? If so, anyone have a price and part number?
Old Dec 20, 2000 | 06:28 PM
  #11  
GetSome681's Avatar
Member
 
Joined: Dec 2000
Posts: 85
Does anyone know someone, or has a friend that has installed a mobile video receiver unit? Like one with the fold out lcd screen? Or maybe even put a lcd display in the dash when they took out the factory receiver? I know that the fold out displays I have been looking at are a single din unit, so there would be a lot of space left in the dash...Sorry I don't know much..but any help is appreciated. Thanks.
Old Jan 2, 2001 | 09:28 AM
  #12  
punkdork's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 3,528
Pioneer's instructions are nice but...

I'd like to have a pretty picture from the Service Manual if anyone has one. I like to be well prepared before I tear apart my baby.
Old Jan 15, 2001 | 12:35 PM
  #13  
punkdork's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 3,528
Since I'm getting the Crutchfield dash piece, I dunno if I need to remove the vents, can anyone tell me if I do?
Old Jan 15, 2001 | 12:47 PM
  #14  
PIONEER's Avatar
Senior Member
iTrader: (1)
 
Joined: Aug 2000
Posts: 1,686
From: Raleigh, NC
Originally posted by punkdork
Since I'm getting the Crutchfield dash piece, I dunno if I need to remove the vents, can anyone tell me if I do?
U have to remove the vents, to remove the 2 screws that hold the center console in place. also need to pop the trim to remove the bottom 2 screws.
Old Jan 15, 2001 | 01:30 PM
  #15  
punkdork's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 3,528
Cool, Thanks.
Old Mar 3, 2007 | 09:40 PM
  #16  
jkmay01's Avatar
Lil 8
iTrader: (3)
 
Joined: Oct 2002
Posts: 566
Originally Posted by GetSome681
Does anyone know someone, or has a friend that has installed a mobile video receiver unit? Like one with the fold out lcd screen? Or maybe even put a lcd display in the dash when they took out the factory receiver? I know that the fold out displays I have been looking at are a single din unit, so there would be a lot of space left in the dash...Sorry I don't know much..but any help is appreciated. Thanks.


yea the decks that have lcd monitors are single din, with the 2k max's which are dual din you will need a dual din cover that allows you to punch out a single din space if you look at my old max you will see what i am talking about i had single din at first then changed to dual din to use both spaces for deck then single din dvd player
Old Mar 3, 2007 | 10:23 PM
  #17  
SilverGLE's Avatar
I'm watching you, boy...
iTrader: (21)
 
Joined: Jan 2006
Posts: 2,262
From: Knoxville, TN
Um, back from the dead....?
Old Mar 3, 2007 | 11:43 PM
  #18  
jkmay01's Avatar
Lil 8
iTrader: (3)
 
Joined: Oct 2002
Posts: 566
haha lol yea man..... took me a little while!!! wasnt feeling right without the MAX near by!!!! I have some good things in the making for ol girl!!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
I<3 A32's
All Motor
1
Sep 10, 2015 11:07 AM
mpbclutch33
8th Generation Maxima (2016-)
3
Sep 8, 2015 06:21 PM
JoshG
4th Generation Maxima (1995-1999)
17
Sep 5, 2015 10:10 PM
Johnny9595
4th Generation Maxima (1995-1999)
5
Sep 3, 2015 05:18 AM




All times are GMT -7. The time now is 09:29 AM.