s-tech
#4
Two suggestions that should save you some time:
1) cut the bumpstops as described in the instructions that came wit your springs
2) when you put the new springs on the struts it is not necessary to compress them with a spring compressor, instead you can do it by hand.
1) cut the bumpstops as described in the instructions that came wit your springs
2) when you put the new springs on the struts it is not necessary to compress them with a spring compressor, instead you can do it by hand.
#5
You may already know about these, but if not, a few how-to's to assist:
http://www.kevinfisher.net/web_server/maxima/springs/
http://www.innerbean.com/housecor/strut_install.html <-this shows a spring and strut swap, but has the info. you'd need to just do springs if you prefer.
http://www.kevinfisher.net/web_server/maxima/springs/
http://www.innerbean.com/housecor/strut_install.html <-this shows a spring and strut swap, but has the info. you'd need to just do springs if you prefer.
Thread
Thread Starter
Forum
Replies
Last Post
-Red-
5th Generation Maxima (2000-2003)
8
09-21-2004 11:35 PM