5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

My 2003 Max...please read...

Old Aug 24, 2004 | 01:29 PM
  #1  
BergundyMax's Avatar
Thread Starter
Member
 
Joined: Aug 2004
Posts: 85
My 2003 Max...please read...

Hey whats up..im new here...I have a 2003 bergundy maxima SE.....I have 20 % tints and 2 12 inch RF punchs in the trunk.....not too much into speed...juss wanted to know what mods u think i should get.....I wanna get 18's or 19's but I live in NY...(potholecity) and i dont know what to do....I also have charcoal plush interior and looks kinda dull....i wanna liven my car up a little with a dash trim but I think that plush interior and a nice dash trim would clash....(luxery meets ghetto, lol)...i dunno what do u guys think?
Old Aug 24, 2004 | 01:42 PM
  #2  
† ErV †
Guest
 
Posts: n/a
You should defenitely get rid of your TINTS and get TINT. That's the first i would do anyway.
Old Aug 24, 2004 | 01:46 PM
  #3  
BergundyMax's Avatar
Thread Starter
Member
 
Joined: Aug 2004
Posts: 85
huh?????????????
Old Aug 24, 2004 | 01:46 PM
  #4  
str8max's Avatar
Senior Member
iTrader: (3)
 
Joined: Jun 2003
Posts: 417
get a drop!
Old Aug 24, 2004 | 01:54 PM
  #5  
BergundyMax's Avatar
Thread Starter
Member
 
Joined: Aug 2004
Posts: 85
yeah...definately....i'm not the type tyo get really into it.....i juss want a drop....rims tins...my system....and a few othewr miscellaneous mod's..thats all
Old Aug 24, 2004 | 01:56 PM
  #6  
str8max's Avatar
Senior Member
iTrader: (3)
 
Joined: Jun 2003
Posts: 417
I just dropped my max with kyb gr2 and eibachs $485 shipped then put them on myself
Old Aug 24, 2004 | 02:01 PM
  #7  
† ErV †
Guest
 
Posts: n/a
I was sarcastic. Tints is the wrong word, as TINT is both plural and singular. Call it a pet peeve.

Besides, if you read just a couple pages back you will learn a lot more than what you will get with this weekly thread. But let me save you some time and list what people will tell you to do post after post:

- aluminium dash kit
- get 18s man, i run them and haven't had a problem
- bigger than 17s and you will break a rim every day in nyc
- get a strut bar
- get a sway bar
- get a ypipe
- get an intake
- get DDEs!
- carbon fiber hood
- get a lip!
- get chrome handles
- get door sills

and they have a good selection for all trims.. don't see photos though.

http://www.edashkit.com/shop/index.h...alog162_0.html

and here is a decent installation guide, that is somewhat generic but still, good photos.

http://www.nissanperformancemag.com/...superior_dash/
Old Aug 24, 2004 | 02:08 PM
  #8  
BergundyMax's Avatar
Thread Starter
Member
 
Joined: Aug 2004
Posts: 85
thanx a SH**load....i like the DDE's but i heard that when i install the Angel eye's...you dont have ur high beams? is that true? I also want to get the polarg clearance bulbs and a clear turning signal......ne help for that?
Old Aug 24, 2004 | 02:11 PM
  #9  
† ErV †
Guest
 
Posts: n/a
Nope. They don't affect anything. The rings stick to the edge of the reflector for the high and low beams.

You do have to open the headlights and it's a bit touchy the first time you do it but that's probably the worst part.
Old Aug 25, 2004 | 12:07 AM
  #10  
BergundyMax's Avatar
Thread Starter
Member
 
Joined: Aug 2004
Posts: 85
how much do the DDE's cost?
Old Aug 25, 2004 | 01:15 AM
  #11  
HNDA ETR's Avatar
Still Here... IM me for more..
iTrader: (10)
 
Joined: Jun 2003
Posts: 2,129
From: San Fernando Valley CALI
Originally Posted by BergundyMax
how much do the DDE's cost?
See them here: http://www.umnitza.com/index.php?cPath=32_43

defintely recommend them!!
Old Aug 25, 2004 | 02:29 AM
  #12  
FusionAcid's Avatar
Senior Member
iTrader: (1)
 
Joined: Jun 2003
Posts: 320
Originally Posted by HNDA ETR
See them here: http://www.umnitza.com/index.php?cPath=32_43

defintely recommend them!!
Is this the whole assembly or just the angel eyes upgrade? Both sides or 1 side?

if its the whole assembly, would these fit on a 2000? would u need to do any modding to the harness?


more infor on this dde plz
Old Aug 25, 2004 | 03:19 AM
  #13  
panda_1's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Oct 2003
Posts: 2,536
From: Port st Lucie
if your gonna get a dash kit, you might wanna think about spending the extra money and goin with a molded instead of a flat kit.
Old Aug 25, 2004 | 03:20 AM
  #14  
panda_1's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Oct 2003
Posts: 2,536
From: Port st Lucie
link for the molded kits

http://www.autodash.com/model.lasso
Old Aug 25, 2004 | 05:57 AM
  #15  
2k3TitaniumSe's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Jul 2003
Posts: 3,761
Lower the car first. Then work on the engine.
Old Aug 25, 2004 | 06:42 AM
  #16  
Nyc2kMax's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 616
OK
Dont get rid of your tints just watch out for the cops. definately get 18' , poteholecity is not friendly on 19's and check the parts section for the internal mods..............
lata
Old Aug 25, 2004 | 08:13 AM
  #17  
BP's Avatar
BP
Donating Maxima.org Member
iTrader: (1)
 
Joined: Feb 2004
Posts: 422
Originally Posted by FusionAcid
Is this the whole assembly or just the angel eyes upgrade? Both sides or 1 side?

if its the whole assembly, would these fit on a 2000? would u need to do any modding to the harness?


more infor on this dde plz
dde won't fit 2000-2001 headlamps. you'd need to upgrade to 2002+ for them to be compatible.

weird...it seems more people would know about ddes seeing how many posts there have been about them.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mahmuth
5th Generation Maxima (2000-2003)
3
Aug 16, 2024 08:23 PM
Max139617
Members Rides
41
Oct 19, 2016 11:34 AM
Maximan190
Maximas for Sale / Wanted
4
Dec 16, 2015 06:01 AM
NewMax03
Maximas for Sale / Wanted
2
Oct 7, 2015 08:27 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 03:55 PM.