5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Throttle body replacement???

Thread Tools
 
Search this Thread
 
Old Sep 17, 2004 | 03:12 PM
  #1  
fornimage's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 339
Throttle body replacement???

Has anyone had their throttle body replaced on an 02-03 Maxima? I ask because I just got a bunch of codes pulled pointing to a faulty throttle body...i.e. P1122, P0507, P0221, P0223, & P1124. Is it unusual for this to happen on and 02 Max so early? Right now the car is running a high idle around 900 but drives fine. I'm hoping that I just got a bad throttle body and doesn't happen again on a new one cuz I can't figure out why it would crap out on me in the first place. Oh, my warranty is out...~43,500mi. Thanks for any help or suggestions guys.
Old Sep 17, 2004 | 04:35 PM
  #2  
IceY2K1's Avatar
Fastest Fantasy Maxima Evar
iTrader: (3)
 
Joined: Jan 2001
Posts: 16,245
It's either your TPS sensor or your Throttle Control Motor Relay/15A fuse is blown.

MY bet is you blew the fuse or messed up a wire connection during your nitrous activation switch install. http://forums.maxima.org/showthread....hlight=nitrous

You really should post *ALL* relevant info for the best help next time.

I don't have the EL-section of the 2K2+ FSM to show me where that fuse is exactly, but that 15A fuse is #63 with a white/red wire going to your Throttle Control Motor Relay which is in front/next to the battery. Looks like a smaller type, 3rd one towards the drivers side closest to the battery. It's next to the "Park/Neutral position" relay, which should be labeled.

Good luck.
Old Sep 17, 2004 | 06:18 PM
  #3  
fornimage's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 339
Really appreciate the help. Thanks. I've checked that throttle control fuse and it's still good. This sucks! TPS might have went down the tubes.
Old Sep 17, 2004 | 07:41 PM
  #4  
s_hinerman's Avatar
Senior Member
iTrader: (4)
 
Joined: Dec 2003
Posts: 491
Mine was replaced under warranty. Have you cleaned yours lately??
That is when mine died!!
Old Sep 19, 2004 | 12:39 AM
  #5  
IceY2K1's Avatar
Fastest Fantasy Maxima Evar
iTrader: (3)
 
Joined: Jan 2001
Posts: 16,245
How do you wire the WOT activation switch for NX kits especially on drive-by-wire cars?


Originally Posted by fornimage
Really appreciate the help. Thanks. I've checked that throttle control fuse and it's still good. This sucks! TPS might have went down the tubes.
Old Sep 19, 2004 | 11:37 AM
  #6  
fornimage's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2000
Posts: 339
The NX kit comes with a WOT microswitch that is installed under the gas pedal. All you have to do is mount the switch so that when you step on the pedal for WOT the microswitch is engaged. However, I opted not to do this. I wonder if this could have been the reason why my throttle body could have gone bad. I did make sure the the engine was running over 3K rpm before hitting the nitrous button though.

Anyone know how much a new throttle body will cost me? Anyone have
Dave B.'s info? Thanks.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
May 21, 2016 12:46 PM
iflexsteel
5th Generation Classifieds (2000-2003)
2
Sep 15, 2015 03:37 AM
Maximeltman
4th Generation Classifieds (1995-1999)
0
Aug 31, 2015 01:01 PM
homewrecker
5th Generation Maxima (2000-2003)
13
Aug 24, 2015 08:56 PM
Samedi
4th Generation Maxima (1995-1999)
11
Aug 13, 2015 04:05 PM




All times are GMT -7. The time now is 05:49 AM.