will my AE knob fit
12-23-2004, 03:42 PM
#1
Member
Thread Starter
Join Date: Jun 2003
Posts: 47
will my AE **** fit
I ordered the old pacesetter short shift kit from customaxima.com over the summer and haven't put it in. I recently got the anniversary edition shift **** and I was wondering if the AE shift **** will fit on the pacesetter short shifter. I don't want to open the short shifter package if this won't work. If anyone else has this combo let me know. Thanks.
12-23-2004, 05:06 PM
#2
Unscrew the AE **** and try it on the pacesetter short shifter. If it fits, you're golden. Sometimes I wonder if people are sometimes just lazy or not. It's not like you have to take apart an entire transmission to see if it works or not. It's just a ****.
12-25-2004, 08:21 AM
#3
i have this setup and it works fine. i had the same concern when i got the STS because the threads on the STS are much different from stock. but the **** fit right on, the know threads are soft and i guess they just rethread really easily.
P.S. the AE shift **** finish wears off, you may want to put a few coats of clear coat on it before using it. i did not do this when the **** was new but once the finish wore off i did and now it is chrome with the original gate detail in tact.
P.S. the AE shift **** finish wears off, you may want to put a few coats of clear coat on it before using it. i did not do this when the **** was new but once the finish wore off i did and now it is chrome with the original gate detail in tact.
12-26-2004, 03:51 PM
#4
Banned
Join Date: May 2003
Posts: 371
Originally Posted by Matt_01SE_20th
i have this setup and it works fine. i had the same concern when i got the STS because the threads on the STS are much different from stock. but the **** fit right on, the know threads are soft and i guess they just rethread really easily.
P.S. the AE shift **** finish wears off, you may want to put a few coats of clear coat on it before using it. i did not do this when the **** was new but once the finish wore off i did and now it is chrome with the original gate detail in tact.
P.S. the AE shift **** finish wears off, you may want to put a few coats of clear coat on it before using it. i did not do this when the **** was new but once the finish wore off i did and now it is chrome with the original gate detail in tact.
the finish with lettering: I've remove it all, by scratching carefully with a key!
After you get a nice chromed look! Who need gear number anyway 
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
trsandrew
7th Generation Maxima (2009-2015)
17
04-08-2016 06:45 PM
trsandrew
Group Deals / Sponsors Forum
2
10-25-2015 02:47 PM
atriuum
4th Generation Classifieds (1995-1999)
3
09-28-2015 01:19 PM
Pied
4th Generation Maxima (1995-1999)
0
09-26-2015 03:29 PM