Anybody have this kit?
#1
Anybody have this kit?
I'm worried about how high from the ground it is without lowering the car. Its fiberglass - will it crack at the first driveway/pothole?
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Has anybody had any experience? Pls help me out.
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Has anybody had any experience? Pls help me out.
#7
i dont mind the fornt bumper but the back is just ugly IMO. i wouldnt get tehm personally but yeah, if thats what you like, then go for it! and yes it will crack!! i have a fiberglass kit on my 240sx and the front lip is just cracks everywhere. dont buy fiberglass, your car will look real cheap after couple of years. and they dont even fit right...
#9
yeah i have it and its bad *** trust me its strong i hit some **** and it held up the thing you have to worry about is the sides but your not lowered like i am 2.2 inchs front and 1.6 rear so i see no problems in your case.
good luck p.m me with any qestions p.s FILL YOUR POCKETS WHEN YOU GO TO HAVE IT PUT ON CAUSE ITS A PAIN IN THE BUTT AND IT COSTS LOTS OF MONEY TO HAVE PUT ON. 900-1500 DEPENED ON SHOP AND FACTORY FAWS LIKE BODY WORK (CRAFTSMANSHIP)
good luck p.m me with any qestions p.s FILL YOUR POCKETS WHEN YOU GO TO HAVE IT PUT ON CAUSE ITS A PAIN IN THE BUTT AND IT COSTS LOTS OF MONEY TO HAVE PUT ON. 900-1500 DEPENED ON SHOP AND FACTORY FAWS LIKE BODY WORK (CRAFTSMANSHIP)
#10
The only problem with this kit as you can see in 01ctmax sig pic is that where the fenders end and the bumper begins, its not molded right so the curves dont flow. I have the stillen front bumper which is urethane and it is molded so the lines flow from the bumper to the fender and I have hit it a few times and it has not cracked or broken. Either go with urethane or just paint the stock grill.
#11
I do like that front bumper though. Just take look at my cardomain page and you can see how my bumper fits. If you want some more pics just pm me and Ill sent you some more. Good luck with what you choose.
#12
shout outs to all y'all for ur help. I'm goin wit the kit, I wonder how many inches lower the kit is than the stock front bumper. Chun, ur 240 looks fine, ur cracks arent noticeable from far.
My shop says it may sway over 60mph with the resistence? Anyone heard of this?
My shop says it may sway over 60mph with the resistence? Anyone heard of this?
#13
Originally Posted by rule da road
shout outs to all y'all for ur help. I'm goin wit the kit, I wonder how many inches lower the kit is than the stock front bumper. Chun, ur 240 looks fine, ur cracks arent noticeable from far.
My shop says it may sway over 60mph with the resistence? Anyone heard of this?
My shop says it may sway over 60mph with the resistence? Anyone heard of this?
#21
Originally Posted by ighettoboyi
lol d@mn that back isn't ugly, it's oogly. and that front doesnt match whatsoever. just get teh stillen lip and rear man, that's what i'd do if i wanted a kit
#23
id say go with urethane. i was originally ganna go with w/that front bumper,but than i heard to many things about it cracking and stuff, so i went with urethane, and its really durable. it is a huge pain to get the sides and back to fit right because of the Fiberglass, it will cost you a pretty penny to get that kit put on and painted properly
#25
#27
dang, just a couple of days too late. Where was this guy when i first posted. It seems like its gonna be the same material but diff seller and kit. I'll see what my body shop can do about it. But I will certainly post pics, when I can.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
3
09-28-2015 07:58 AM
Pied
4th Generation Maxima (1995-1999)
0
09-26-2015 03:29 PM